Skip to content. Skip to main navigation.

avatar

Abdolhossein Haji-Sheikh

Name

[Haji-Sheikh, Abdolhossein]
  • Professor, Mechanical & Aerospace Engineering

Appointments

    • Jan 1970 to Present Professor
      University of Texas at Arlington, Arlington, Texas.
    • Jan 1968 to Jan 1970 Assoc Prof
      University of Texas at Arlington, Arlington, Texas.
    • Jan 1966 to Jan 1968 Assist Professor
      University of Texas at Arlington, Arlington, Texas.
    • Jan 1965 to Jan 1966 Instructor
      University of Minnesota, Minneapolis, Minnesota.

Publications

      Journal Article 2013
      • Kaisare, A.; Agonafer, D.; Haji-Sheikh, A.; Chrysler, G.; Mahajan, R. Thermal Based Optimization of Functional Block Distributions in a Non-Uniformly Powered Die. submitted to IEEE Transactions on Components and Packaging Technologies.
        {Journal Article }

      Journal Article 2010
      • Haji-Sheikh, A.; Minkowycz, W. J.; Manafzadeh, S. Axial conduction effect in flow through circular porous passages with prescribed wall heat flux. Heat Mass Transfer 2010, 46 (7), 727–738.
        {Journal Article }
      2010
      • Haji-Sheikh, A.; Minkowycz, W. J.; Manafzadeh, S. Heat transfer with upstream thermal penetration in flow through porous plate passages. Applied Thermal Engineering 2010, 30 (6-7), 639–648.
        {Journal Article }

      Book 2010
      • Cole, K., Beck, J. V., Haji-Sheikh, A., & Litkouhi, B. (2010). Heat Conduction Using Green's Functions, Textbook, 2nd eddition. Fl: CRC Press.
        {Book }

      Journal Article 2009
      • Kaisare, A.; Agonafer, D.; Haji-Sheikh, A.; Chrysler, G.; Mahajan, R. Development of an Analytical Model to a Temperature Distribution of First Level Package with a Non-Uniformly Powered Die. Journal of Electronic Packaging 2009, 31 (1), 011055-(1-7.
        {Journal Article }
      2009
      • Haji-Sheikh, A.; Beck, J. V.; Amos, D. E. Axial Heat Conduction Effects in the Entrance Region of Circular Ducts. Heat and Mass Transfer, 2009, 45 (3), 331-341.
        {Journal Article }
      2009
      • Haji-Sheikh, A.; Amos, D. E.; Beck, J. V. Temperature Field in a Moving Semi-Infinite Region with a Prescribed Wall Heat Flux. International Journal of Heat & Mass Transfer 2009, 51 (7-8), 2092-2101.
        {Journal Article }
      2009
      • Minkowycz, W. J.; Haji-Sheikh, A. Asymptotic behaviors of heat transfer in porous passages with axial conduction. International Journal of Heat & Mass Transfer 2009, 52 (13-14), 3101-3108.
        {Journal Article }
      2009
      • Haji-Sheikh, A. Determination of Heat Transfer in Ducts with Axial Conduction by Variational Calculus. ASME J. of Heat Transfer 2009, 131 (9), 09-1702.
        {Journal Article }

      Conference Proceeding 2008
      • Uthaman, R., Kaisare, A., Haji-Sheikh, A., Agonafer, D., Mahajan, R., & Chrysler, G. (2008). Multi-Objective Optimization Entailing Computer Architecture and Thermal Design for Non-Uniformly Powered Microprocessors. In Thermal and Thermomechanical Phenomena in Electronic Systems,ITHERM 2008..
        {Conference Proceeding }
      2008
      • Raju, U., Kaisare, A., Agonafer, D., Haji-sheikh, A., Chrysler, G. (INTEL), Mahajan, R. (INTEL), “Multi-Objective Optimization Entailing Computer Architecture and Thermal Design for Non-Uniformly Powered Microprocessors,” Thermal and Thermomechanical Phenomena in Electronic Systems, 2008, ITHERM 2008.
        {Conference Proceeding }

      Book 2008
      • Haji-Sheikh, A. & Minkowycz, W. Topics, E., Transfer, M., Media, E., & Vadasz, S. (Eds.). (2008). Heat Transfer Analysis Under Local Thermal Non-Equilibrium Gonditions.
        {Book }

      Journal Article 2008
      • Kiani, S.; Chan, W. S.; Haji-Sheikh, A. Measurement of Thermal Conductivity of Triaxial Braided Composites. Journal of Composite Materials 2008, 42 (12), 1159-1177.
        {Journal Article }
      2008
      • Beck, J. V.; Wright, N. T.; Haji-Sheikh, A. Transient Power Vriation in Surface Conditions in Heat Conduction for Plates,. International Journal of Heat & Mass Transfer 2008, 51, 2553-2565.
        {Journal Article }
      2008
      • Haji-Sheikh, A.; Amos, D. E.; Beck, J. V. Axial Conduction of Heat Through in a Moving Semi-Infinite Fluid. International Journal of Heat & Mass Transfer 2008, 51 (19-20), 4651-4658.
        {Journal Article }
      2008
      • Beck, J. V.; Wright, N. T.; Haji-Sheikh, A.; Cole, K. D.; Amos, D. E. Conduction in Rectangular Plate with Boundary Temperatures Specified. International Journal of Heat & Mass Transfer 2008, 51 (19-20), 4676-4690.
        {Journal Article }
      2008
      • Haji-Sheikh, A.; Beck, J. V.; Amos, D. E. Axial Heat Conduction Effects in the Entrance Region of Parallel Plate Ducts. International Journal of Heat & Mass Transfer, 2008, 51 (25-26), 5811-5822.
        {Journal Article }
      2008
      • Haji-Sheikh, A.; Beck, J. V. Entrance Heat Transfer in Rectangular Ducts with Constant Axial Energy Input. International Journal of Heat & Mass Transfer 2008, 51 (3-4), 434-444.
        {Journal Article }

      Conference Proceeding 2007
      • Kaisare, A., Agonafer, D., Haji-Sheikh, A., Chrysler, G., & Mahajan, R. (2007). Analytical Approach To Temperature Distribution of A First Level Package with a Non-Uniformly Powered Die. In International Mechanical Engineering Congress and Exposition. Sealte Washington:.
        {Conference Proceeding }
      2007
      • Kaisare, A., Agonafer, D., Haji-sheikh, A., Chrysler, G., & Mahajan, R. (2007). Numerical model for design of non uniform powered microprocessors using multi-objective optimization based on both thermal and device clock performance. In 2007 ASME/JSME Thermal Engineering and Summer Heat Transfer Conferences & InterPACK ’07.
        {Conference Proceeding }

      Journal Article 2007
      • Haji-Sheikh, A.; Beck, J. V. Entrance Effect on Heat Transfer to Laminar Flow Through Passages. International Journal of Heat & Mass Transfer 2007, 50 (17-18), 3340-3350.
        {Journal Article }
      2007
      • Hooman, K.; Haji-Sheikh, A.; Nield, D. A. Thermally Developing Brinkman-Brinkman Forced Convection in Rectangular Ducts with Isothermal Walls. International Journal of Heat & Mass Transfer 2007, 50 (17-18), 3521-3533.
        {Journal Article }
      2007
      • Hooman, K.; Haji-Sheikh, A. Analysis of heat transfer and entropy generation for a thermally developing Brinkman-Brinkman forced convection problem in a rectangular duct with isoflux walls. International Journal of Heat & Mass Transfer 2007, 50 (21-22), 4180-4194.
        {Journal Article }
      2007
      • McMasters, R. L.; Dinwiddie, R. B.; Haji-Sheikh, A. Estimating the Thermal Conductivity of a Film on a Known Substrate. Journal of Thermophysics and Heat Transfer 2007, 21 (4), 681-687.
        {Journal Article }

      Conference Proceeding 2006
      • Kiani, S., Chan, W., & Haji-sheikh, A. (2006). Measurements of Thermal Conductivity of Triaxial Braded Composites. In American Society for Composites 21st Annual Technical Conference. Dearborn, Michigan:.
        {Conference Proceeding }
      2006
      • Kaisare, A., Agonafer, A. H. S., Chrysler, G., & Mahajan, R. (2006). Approximate Analytical Model for a First Level Package with Non-Uniformly Powered Die. In International Mechanical Engineering Congress and Exposition 2006. Chicago Hilton.:.
        {Conference Proceeding }
      2006
      • Kaisare, D. A., Haji-Sheikh, R. M., & Chrysler, G. (2006). Analytical approach to temperature distribution of a first level package with a non-uniformly powered processor. In ITHERM. Sheraton San Diego Hotel and Marina.:.
        {Conference Proceeding }
      2006
      • Kaisare, A., Agonafer, D., Haji-Sheikh, A., & Mahajan, R. (2006). Design Rule For Minimizing Thermal Resistance In A Non–uniformly Powered Micropr Greg ocessor. In Semi-Therm. Dallas TX.:.
        {Conference Proceeding }

      Book Chapter 2006
      • Haji-Sheikh, A. & Howell, J. R. (2006). "Monte Carlo Methods," Handbook of Numerical Heat Transfer, 2nd Edition, Chapter 8. In W. Minkowycz, et al., John Wiley. (Eds.), .
        {Book Chapter }

      Journal Article 2006
      • Haji-Sheikh, A. Fully Developed Heat Transfer to Fluid Flow in Rectangular Passages Filled With Porous Materials. ASME Journal of Heat Transfer 2006, 128 (6), 550-556.
        {Journal Article }
      2006
      • Minkowycz, W. J.; Haji-Sheikh, A. Heat Transfer in Parallel Plates and Circular Porous Passages with Axial Conduction. International Journal of Heat and Mass Transfer 2006, 49 (13-14), 2381-2390.
        {Journal Article }
      2006
      • Haji-Sheikh, A.; Nield, D. A.; Hooman, K. Heat Transfer in the Thermal Entrance Region for Flow Through Rectangular Porous Passages. International Journal of Heat & Mass Transfer 2006, 49 (17-18), 3004-3015.
        {Journal Article }
      2006
      • Haji-Sheikh, A.; Beck, J. V. Inverse Determination of Wall Temperature During Constant Energy Input. Journal of Numerical Heat Transfer, 2006, 506 (5), 401-418.
        {Journal Article }

      Journal Article 2005
      • A. Haji-Sheikh. "Experimental Study of Non-Fourier Thermal Response in Porous Media," Journal of Porous Media, vol. 8, 2005.
        {Journal Article }

      Book 1992
      • J. V. B. Cole and A. H. S. Litkouhi, Heat Conduction Using Green's Functions. Taylor and Francis, 1992.
        {Book }

      Journal Article 201
      • Haji-Sheikh, A.; Beck, J. V.; Cole, K. D. Steady state Green's function solution for moving media with axial conduction. International Journal of Heat & Mass Transfer 201, 53 (13-14), 2583–2592.
        {Journal Article }

Courses

Other Service Activities

  • Uncategorized
    • Dec  ASSOCIATE EDITOR
      ASME Press Book Series in Electronic Packaging
    • Dec  EDITORIAL ADVISORY BOARD
      Inverse Problems in Engineering and numerical heat transfer journals
    • Dec  OTHER PROFESSIONAL ACTIVITIES:
      Construction Research Center, UTA, Associate Director
      North Texas Council of Governments, Energy Subcommittee
      Graduate Advisor, Mechanical Engineering Graduate Program (1991-1996)
    • Dec  SOFTWARE:
      Conduction Solver, A. Haji-Sheikh., teaching aid in conduction.
    • Dec  CONSULTING:
      LTV Aerospace, Summer 1967
      Virginia Chemical, Inc., 1976
      City of Irving, Texas, 1978
      Red Cedar Shingle and Handsplit Shake Bureau, 1978-79
      Department of Energy, 1981-82
      Innovative Building Products, 1988-1990
      FSI International, 1996
      Beck Engineers, for Sandia National Lab., 2001-2002
    • Dec  EDITORIAL EXPERIENCE

      Integral Methods in Science and Engineering, 1985, eds. Payne, Corduneanu, Haji-Sheikh, and Huang, Hemisphere, 1986.

      Integral Methods in Science and Engineering, 1990, eds. Haji-Sheikh, Corduneanu, Fry, Huang, and Payne, Hemisphere, 1991.

      Guest Editor, Special Issue of Inverse Problems in Engineering, The Tenth Inverse Problems in Engineering Seminar, Vol. 9, No. 5, 2001.

      Associate Editor, ASME Press Book Series in Electronic Packaging, 2002-Present

      International Editorial Board, Inverse Problems in Engineering Journal, 2001-2004

      Editorial Advisory Board, Numerical Heat Transfer, 2002-Present

      Advisory Board, Inverse Problems in science and Engineering, 2004-Present

      Asociate Technical editor, ASME Journal of Heat Transfer, 2005-2008

    • Dec  SCIENTIFIC AND PROFESSIONAL SOCIETIES OF WHICH A MEMBER
      American Society of Mechanical Engineers, Fellow
      American Institute Aero. and Astro., Senior Member
      Sigma Xi