avatar

Cheng Luo

[Cheng Luo]

Professor, Mechanical and Aerospace Engineering
Last Updated: September 29, 2020
about me

Research Interests

Research Interests
1. Design, modeling and fabrication of micro/nanosystems, including 3-D polymer (flexible) devices, sensors, energy harvesters, fog collectors, and submarines; 2. Development of biomicrosystems, including transdermal glucose biosensors, biofouling surfaces for implants, and anti-biofouling surfaces for intraocular lenses; and 3. Solid mechanics, and fluid mechanics

Education

Education

    • 2000 PhD in Mechanical Engineering
      University of California at Berkeley, 2000
    • 1997 MS in Mechanical Engineering
      University of Houston, 1997
    • 1993 BS in Engineering Mechanics
      Hunan University, 1993

Appointments

Appointments

    • Sept 2011 to Present Professor
      Mechanical and Aerospace Engineering, University of Texas at Arlington
    • Aug 2007 to Aug 2011 Associate Professor
      Mechanical and Aerospace Engineering, University of Texas at Arlington
    • Sept 2002 to July 2007 Assistant Professor
      Biomedical Engineering Program and Institute for Micromanufacturing, Louisiana Tech University
    • July 2001 to Aug 2002 Post-doctoral Fellow
      Georgetown Advanced Electronics (Health Microsystems) Laboratory, Georgetown University
      worked on a DARPA-sponsored biofluidic microsystem project. Supervisors: Profs. John Currie and Mak Paranjape
    • July 2000 to June 2001 Post-doctoral Fellow
      Berkeley Sensor and Actuator Center, University of California at Berkeley
      worked on a DARPA-supported MEMS packaging project. Supervisor: Prof. Liwei Lin
    • Aug 1999 to May 2000 Graduate Student Instructor
      Mechanical Engineering Department, University of California at Berkeley
    • Jan 1998 to July 1999 Graduate Student Researcher
      University of California at Berkeley
    • June 1997 to Jan 1998 Structural Engineer
      Structural Department , National Oilwell Company at Houston
    • Aug 1995 to May 1997 Research and Teaching Assistant
      Mechanical Engineering Department, University of Houston
    • Sept 1993 to Apr 1995 Research Assistant
      Mechanics and Engineering Science Department, Beijing University, China

Support & Funding

Support & Funding

This data is entered manually by the author of the profile and may duplicate data in the Sponsored Projects section.
    • Aug 2009 to July 2014 Generation of Sidewall Patterns Using Thermal Shape-Memory Polymers sponsored by  -  $300000
      Cheng Luo (Funded)
    • June 2009 to May 2013 Development of A Nanopunching Lithography Method for Generating Sidewall Templates and Polymer-Based Nanodevices. sponsored by  -  $311999
      Cheng Luo (Funded)
    • Sept 2007 to May 2011 Theoretical, Numerical and Experimental Studies of an Intermediate-Layer Lithography Approach sponsored by  -  $280680
      Cheng Luo (Funded)
    • Sept 2007 to Aug 2009 Sensors: Two Types of Suspended-Silicon-Nanowire Based Sensors of Ultra-high Sensitivity sponsored by  -  $100733
      Cheng Luo (Funded)

Publications


      2011
      • Book Chapter
        A New Patterning Approach to Pattern and Applications
        Polypyrrole: Properties, Performance and Applications
        [Chakraborty, A, Liu, X, Luo, Cheng]. "Nova Science Publishers, Inc.".

      2010
      • Book Chapter
        Generation of Micropatterns on Side Surfaces of Polymer and Si Substrates Using a Micropunching Lithography Approach
        Lithography: Principles, Processes and Materials
        [Luo, Cheng]. "Nova Science Publishers, Inc.".

      2008
      • Book Chapter
        Generation of all-polymeric diodes and capacitors using an innovative intermediate-layer lithography
        Progress in Solid State Electronics Research
        [Liu, X, Chakraborty, A, Luo, Cheng, Martingale, J]. 127-139 . "Nova Science Publishers, Inc.".

      2001
      • Book Chapter
        Bending and twisting effects in the finite deformations of an inextensible network in three-dimensional space
        Advances in the Mechanics of Plates and Shells
        [Luo, Cheng, Stegman, D]. ????. 213-228. "Kluwer Academic Publishers".

      2020
      • Journal Article
        Experimental Feasibility Evaluation of a New Attached Multi-loop CO2 Heat Pipe for Bridge Deck De-icing Using Geothermal Energy, Journal of Cleaner Production, Volume 275, 1 December 2020, 123160
        [Lei, G. , Lu, XB, Teng, L., Habibzadeh-Bigdarvis, O., Wang, X., Mrinal, M., Luo, C.]. DOI: http://dx.doi.org/https://doi.org/10.1016/j.jclepro.2020.123160
      • Journal Article
        Effects of feed rates on temperature profiles and feed forces in material extrusion additive manufacturing, Additive Manufacturing, Volume 35, October 2020, 101361
        [Luo, Cheng, Wang, Xiang, Migler, Kalman , Seppala, Jonathan ]. DOI: http://dx.doi.org/https://doi.org/10.1016/j.addma.2020.101361

      2019
      • Journal Article
        Determination of constant viscosity for a power-law melt flow inside a circular tube, Chemical Engineering Science, Volume 195, 23 February 2019, Pages 239-241.
        [Luo, Cheng]. Chemical Engineering Science. 195, 239-241. DOI: http://dx.doi.org/10.1016/j.ces.2018.11.053

      2017
      • Journal Article
        Self-Rotation-Induced Propulsion of a Leidenfrost Drop on a Ratchet, Langmuir, Vol. 33, 6307−6313 (2017).
        [Mrinal, Manjarik, Wang, Xiang, Luo, Cheng]. Langmuir : the ACS Journal of Surfaces and Colloids. 33, 6307−6313 .
      • Journal Article
        Conditions for Barrel and Clam-Shell Liquids Drops to Move on Bio-inspired Conical Wires, Scientific Reports, Vol. 7, 9717 (2017).
        [Luo, Cheng, Wang, X]. Scientific Reports. 7,

      2016
      • Journal Article
        Enhancement of fog-collection efficiency of a Raschel mesh using surface coatings and local geometric changes, Colloids and Surfaces A, Vol. 508, 218-229 (2016).
        [Mithun, Rajaram, Heng, Xin, Oza, Manasvikumar, Luo, Cheng]. Colloids and Surfaces. A, Physicochemical and Engineering Aspects. 508, 218-229.

      2015
      • Journal Article
        A liquid drop runs upward between two non-parallel plates. Langmuir, Vol. 31 (9), 2743–2748 (2015).
        [Heng, Xin, Luo, Cheng]. 31(9), 2743-2748.
      • Journal Article
        Flexible PDMS microtubes for examining local hydrophobicity. Microsystem Technologies, Vol. 21(2), 477-485 (2015).
        [Heng, Xin, Luo, Cheng]. Microsystem Technologies. 21(2), 477-485.
      • Journal Article
        Theoretical exploration of barrel-shaped drops on cactus spines. Langmuir, Vol. 31, 11809−11813 (2015).
        [Luo, Cheng]. Langmuir. 31(43), 11809-11813.

      2014
      • Journal Article
        Behavior of a liquid drop between two nonparallel plates. Langmuir, Vol. 30, 8373–8380 (2014).
        [Luo, Cheng, Heng, Xin, Xiang, Mingming]. Langmuir. 30(28), 8373-8380.
      • Journal Article
        Bioinspired plate-based fog collectors. ACS Applied Materials & Interfaces, Vol. 6(18), pp 16257–16266 (2014).
        [Heng, Xin, Luo, Cheng]. ACS Applied Materials & Interfaces. 6(18), 16257-16266.
      • Journal Article
        Controllable strain recovery of shape memory polystyrene to achieve superhydrophobicity with tunable adhesion. Journal of Micromechanics and Microengineering, Vol. 24, 115006 (2014).
        [Sarwate, Prasha, Chakraborty, Anirban, Garg, Varun, Luo, Cheng]. Journal of Micromechanics and Microengineering. 24(11), 115006.
      • Journal Article
        Creation of superwetting surfaces with roughness structures. Langmuir, Vol. 30, 14469−14475 (2014).
        [Garg, Varun, Qiao, Lei, Sarwate, Prasha, Luo, Cheng]. Langmuir. 30(48), 14469-14475.
      • Journal Article
        Existence and stability of an intermediate wetting state on circular micropillars. Microfluidics and Nanofluidics, Vol. 17, 539–548 (2014).
        [Luo, Cheng]. Microfluidics and Nanofluidics. 17(3), 539-548.
      • Journal Article
        Growth of ultra-long ZnO microtubes using a modified vapor-solid setup. Micromachines, Vol. 5(4), 1069-1081 (2014).
        [Lu, Zhihui, Heng, Xin, Chakraborty, Anirban, Luo, Cheng]. Micromachines. 5(4), 1069-1081.
      • Journal Article
        Separation of oil from a water/oil mixed drop using two nonparallel plates, Langmuir, Vol. 30(33), 10002–10010 (2014).
        [Luo, Cheng, Heng, Xin]. Langmuir. 30(33), 10002-10010.
      • Journal Article
        ZnO Wire Structures for Water Collection Inspired by Cacti, ACS Applied Materials & Interfaces, Vol. 6, 8032−8041 (2014).
        [Heng, X, Xiang, M, Lu, Z, Luo, Cheng]. ACS Applied Materials & Interfaces. 6,

      2013
      • Journal Article
        Existence and role of large micropillars on the leaf surfaces of the president lotus, Langmuir, Vol. 29, pp. 7715-7725 (2013).
        [Xiang, Mingming, Wilhelm, Anderson, Luo, Cheng]. Langmuir. 29(25), 7715-7725.
      • Journal Article
        Fabrication of super-hydrophobic microchannels via strain-recovery deformations of polystyrene and oxygen reactive ion etch, Materials, Vol. 6, pp. 3610-3623 (2013).
        [Chakraborty, Anirban, Xiang, Mingming, Luo, Cheng]. Materials. 6(8), 3610-3623.
      • Journal Article
        Propulsion of a microsubmarine using a thermally oscillatory approach, Journal of Micromechanics and Microengineering, Vol. 23(10), 105011 (2013).
        [Qiao, Lei, Luo, Cheng]. Journal of Micromechanics and Microengineering. 23(10), 105011.
      • Journal Article
        Wetting states on circular micropillars with convex sidewalls after liquids contact groove base, Langmuir, Vol. 29(48), 15065–15075 (2013).
        [Luo, Cheng, Xiang, Mingming]. 29(48), 15065-15075.

      2012
      • Journal Article
        A stable intermediate wetting state after a water drop contacts the bottom of a microchannel or is placed on a single corner, Langmuir, Vol. 28 (25), pp. 9554–9561 (2012).
        [Luo, Cheng, Xiang, Mingming, Heng, Xin]. Langmuir. 28(25), 9554-9561.
      • Journal Article
        An Angle inequality for judging the transition from Cassie–Baxter to Wenzel states when a water drop contacts bottoms of grooves between micropillars, Langmuir, Vol. 28 (38), pp. 13636–13642 (2012).
        [Luo, Cheng, Xiang, Mingming]. 28(38), 13636-13642.
      • Journal Article
        Control of the radial motion of a self-propelled microboat through a side rudder, Sensors and Actuators A, Vol. 182, pp. 359-366 (2012).
        [Qiao, Lei, Di Xiao, Lu, FrankK, Luo, Cheng]. Sensors and Actuators. A, Physical. 188, 359-366.
      • Journal Article
        Development of surface tension-driven microboats and microflotillas, Microsystem Technologies, Vol. 18 (9), pp. 1525-1541 (2012).
        [Luo, Cheng, Li, Hao, Qiao, Lei, Liu, Xinchuan]. Microsystem Technologies. 18(9-10), 1525-1541.
      • Journal Article
        Fabrication and testing of a self-propelled, miniaturized PDMS flotilla, Microsystem Technologies, Vol. 18 (9), pp. 1431-1444 (2012).
        [Li, Hao, Qiao, Lei, Liu, Xinchuan, Luo, Cheng]. Microsystem Technologies. 18(9-10), 1431-1444.
      • Journal Article
        Generation of sidewall patterns in microchannels via strain-recovery deformations of polystyrene, Sensors and Actuators A, Vol. 182, pp. 374-382 (2012).
        [Chakraborty, Anirban, Liu, Xinchuan, Luo, Cheng]. Sensors and Actuators. A, Physical. 188, 374-382.
      • Journal Article
        Generation of spatial length and density gradients of ZnO nanowires on a planar surface, Microsystem Technologies, Vol. 18 (9), pp. 1497-1506 (2012).
        [Chakraborty, A, Liu, X, Hui, W, Luo, Cheng]. Microsystem Technologies. 18(9),
      • Journal Article
        Increase buoyancy of a solid fragment using micropillars, Sensors and Actuators A, Vol. 182, pp. 136-145 (2012).
        [Qiao, Lei, Xiang, Mingming, Luo, Cheng]. Sensors and Actuators. A, Physical. 182, 136-145.
      • Journal Article
        Maximum loading capacities of solid fragments with pores and rough surfaces, Nano Bulletin, Vol. 1(1), 120106, 2012
        [Luo, Cheng]. 1(1), 120106.
      • Journal Article
        Micropunching Lithography for Generating Micro-and Submicron-patterns on Polymer Substrates, Journal of Visualized Experiments, Issue 65, e3725, 2012.
        [Chakraborty, Anirban, Liu, Xinchuan, Luo, Cheng]. Journal of Visualized Experiments.(65),

      2011
      • Journal Article
        Development of a self-propelled microflotilla
        [Li, Hao, Luo, Cheng]. Microsystem Technologies. 17(5-7), 777-786.
      • Journal Article
        Driving mechanisms of CM-scaled PDMS boats of respective close and open reservoirs
        [Liu, Xinchuan, Li, Hao, Qiao, Lei, Luo, Cheng]. Microsystem Technologies. 17(5-7), 875-889.
      • Journal Article
        Fibroblast/fibrocyte: surface interaction dictates tissue reactions to micropillar implants
        [Baker, DavidW., Liu, Xinchuan, Weng, Hong, Luo, Cheng, Tang, Liping]. Biomacromolecules. 12(4), 997-1005.
      • Journal Article
        Generation of Au micropatterns on two sidewalls of a Si channel through a PDMS shadow mask
        [Wang, Hui, Luo, Cheng]. Journal of Micromechanics and Microengineering. 21(6), 067005.
      • Journal Article
        Transition from Cassie–Baxter to Wenzel States on microline-formed PDMS surfaces induced by evaporation or pressing of water droplets
        [Luo, Cheng, Xiang, Mingming, Liu, Xinchuan, Wang, Hui]. Microfluidics and Nanofluidics. 10(4), 831-842.
      • Journal Article
        Two simple approaches to fabricate Au microlines on the outer surfaces of micropipettes
        [Wang, Hui, Luo, Cheng]. Microsystem Technologies. 17(5-7), 1115-1121.

      2010
      • Journal Article
        Dramatic squat and trim phenomena of mm-scaled SU-8 boats induced by Marangoni effect
        [Luo, Cheng, Qiao, Lei, Li, Hao]. Microfluidics and Nanofluidics. 9(2-3), 573-577.
      • Journal Article
        Fabrication of Au micropatterns on vertical Si sidewalls using flexible PDMS shadow masks
        [Wang, Hui, Chakraborty, Anirban, Luo, Cheng]. Journal of Micromechanics and Microengineering. 20(12), 127001.
      • Journal Article
        Fabrication of micropatterns on the sidewalls of a thermal shape memory polystyrene block
        [Liu, Xinchuan, Chakraborty, Anirban, Luo, Cheng]. Journal of Micromechanics and Microengineering. 20(9), 095025.
      • Journal Article
        Fabrication of super-hydrophobic channels
        [Liu, Xinchuan, Luo, Cheng]. Journal of Micromechanics and Microengineering. 20(2), 025029.
      • Journal Article
        Generation of Micropatterns on Side Surfaces of Polymer and Si Substrates Using a Micropunching Lithography Approach, Nanotechnology Research Journal 2010, 3 (3), 1-21.
        [Luo, Cheng]. 3(3), 267-287.

      2009
      • Journal Article
        Effects of dimensions on the sensitivity of a conducting polymer microwire sensor, Microelectronics Journal, vol. 40, no. 6, pp. 912-920 (2009).
        [Luo, Cheng, Chakraborty, Anirban]. 40(6), 912-920.
      • Journal Article
        Fabrication of Au sidewall micropatterns using Si-reinforced PDMS molds
        [Liu, Xinchuan, Luo, Cheng]. Sensors and Actuators. A, Physical. 152(1), 96-103.
      • Journal Article
        Generation of micropatterns of conducting polymers and aluminum using an intermediate-layer lithography approach and some applications
        [Luo, Cheng]. Microsystem Technologies. 15(10-11), 1605-1617.
      • Journal Article
        Multiple conducting polymer microwire sensors
        [Chakraborty, Anirban, Parthasarathi, G, Luo, Cheng]. Microsystem Technologies. 15(10-11), 1737-1745.

      2008
      • Journal Article
        Determination of compressive residual stress in a doubly-clamped microbeam according to its buckled shape
        [Luo, Cheng, Francis, Anand, Liu, Xinchuan]. Microelectronic Engineering. 85(2), 339-347.
      • Journal Article
        Propulsion of microboats using isopropyl alcohol as a propellant
        [Luo, Cheng, Li, Hao, Liu, Xinchuan]. Journal of Micromechanics and Microengineering. 18(6), 067002.

      2007
      • Journal Article
        An intermediate-layer lithography method for generating multiple microstructures made of different conducting polymers
        [Chakraborty, Anirban, Liu, Xinchuan, Parthasarathi, Ganga, Luo, Cheng]. Microsystem Technologies. 13(8-10), 1175-1184.
      • Journal Article
        Generation of all-polymeric diodes and capacitors using an innovative intermediate-layer lithography, Microsystem Technologies, vol. 15, no. 10-11, pp. 1605–1617 (2009).
        [Liu, Xia, Chakraborty, A., Luo, Cheng]. 127-139.
      • Journal Article
        Intermediate-layer lithography method for producing metal micropatterns, Journal of Vacuum Science and Technology B, 25, pp. 677-685 (2007).
        [Liu, Xinchuan, Luo, Cheng]. 25(3), 677-685.

      2006
      • Journal Article
        A novel approach to fabricate a PPy/p-type Si heterojunction. Solid-State Electronics, 50, pp. 1687-1691 (2006).
        [Poddar, Rakesh, Luo, Cheng]. Solid-state Electronics. 50(11), 1687-1691.
      • Journal Article
        An Innovative intermediate-layer lithography approach to replicate micropatterns in a conducting polymer. Journal of Vacuum Science and Technology B, 24(2), L19-L22 (2006).
        [Luo, Cheng, Poddar, R, Liu, Xinchuan]. The Journal of Vacuum Science and Technology. 24(2),
      • Journal Article
        Fabrication and application of metallic nano-cantilevers. Microelectronics Journal, 37, pp. 1306-1312 (2006).
        [Chakraborty, Anirban, Luo, Cheng]. 37(11), 1306-1312.
      • Journal Article
        Fabrication and application of silicon-reinforced PDMS masters. Microelectronics Journal, 37, pp. 1036-1146 (2006) .
        [Luo, Cheng, Meng, Fang, Francis, Anand]. Microelectronics Journal. 37(10), 1036-1046.
      • Journal Article
        Innovative approach for replicating micropatterns in a conducting polymer. Journal of Vacuum Science and Technology B, 24(2), L19-L22 (2006).
        [Luo, Cheng, Poddar, Rakesh, Liu, Xinchuan]. 24(2), L22.
      • Journal Article
        Reinforcement of a PDMS master using an oxide-coated silicon plate, Microelectronics Journal, 37, pp. 5-11 (2006).
        [Luo, Cheng, Meng, Fang, Liu, Xinchuan, Guo, Yiyun]. 37(1), 5-11.
      • Journal Article
        Thermal ablation of PMMA for water release using a microheater. Journal of Micromechanics and Microengineering, 16, pp. 580-588 (2006).
        [Luo, Cheng, Liu, Xinchuan, Poddar, Rakesh, Garra, John, Gadre, AnandP., Keuren, EdwardV., Schneider, Thomas, White, Robert, Currie, John, Paranjape, Makarand]. Journal of Micromechanics and Microengineering. 16(3), 580.
      • Journal Article
        An Innovative intermediate-layer lithography approach to replicate micropatterns in a conducting polymer. . Journal of Vacuum Science and Technology B, 24(2), L19-L22 (2006)
        [Luo, Cheng, Poddar, R, Liu, Xinchuan]. Virtual Journal of Nanoscale Science & Technology.

      2005
      • Journal Article
        Fluidic encapsulation in SU-8μ-reservoirs with μ-fluidic through-chip channels, Sensors and Actuators A, 120, pp 172-183 (2005).
        [Nijdam, A.J., Monica, A.H., Gadre, A.P., Garra, J.A., Long, T.J., Luo, Cheng, Cheng, M-C, Schneider, T.W., White, R.C., Paranjape, M.]. Sensors and Actuators. A, Physical. 120(1), 172-183.
      • Journal Article
        Fluorescent microthermal imaging of MEMS microheaters, Sensors and Materials, 17, pp. 1-6 (2005).
        [Van Keuren, E, Albertini, O, Cheng, M, Luo, Cheng, Currie, J, Paranjape, M]. Sensors and Materials. 17, 1-6.
      • Journal Article
        Inaccuracy in the detection of molecules using two microcantilever-based methods, ASME Journal of Applied Mechanics, 72, pp. 617-9 (2005).
        [Luo, Cheng]. Journal of Applied Mechanics. 72(4), 617-619.
      • Journal Article
        Reinforcement of PDMS masters using SU-8 truss structures, Journal of Micromechanics and Microengineering, 15, pp. 1303-9 (2005).
        [Govindaraju, Amitha, Chakraborty, Anirban, Luo, Cheng]. Journal of Micromechanics and Microengineering. 15(6), 1303.
      • Journal Article
        Temperature profiles of microheaters using fluorescence microthermal imaging, Sensors and Materials, 17, pp. 1-6 (2005).
        [Van Keuren, Edward, Cheng, Mark, Albertini, Oliver, Lou, C., Currie, John, Paranjape, Makarand]. 17(1), 1-6.

      2004
      • Journal Article
        Determination of loads in an inextensible network according to geometry of its wrinkles. ASME Journal of Applied Mechanics, 71, pp. 298-300 (2004).
        [Luo, Cheng]. Journal of Applied Mechanics. 71(2), 298-300.
      • Journal Article
        Dry lease of polymer structures with anti-sticking layer, Journal of Vacuum Science and Technology A, 22, pp. 837-841 (2004).
        [Cheng, M.C., Garra, J.A., Gadre, A.P., Nijdam, A.J., Luo, Cheng, Paranjape, M, Currie, J, Schneider, T.W., White, R.C.]. The Journal of Vacuum Science and Technology. 22, 837-841.
      • Journal Article
        Dry release of polymer structures with anti-sticking layer, Journal of Vacuum Science and Technology A, 22, pp. 837-841 (2004).
        [Cheng, M.C., Gadre, A.P., Garra, J.A., Nijdam, A.J., Luo, Cheng, Schneider, T.W., White, R.C., Currie, J.F., Paranjape, M.]. 22(3), 837-841.
      • Journal Article
        Fabrication of a fluid encapsulated dermal patch using multilayered SU-8, Sensors and Actuators A, 114, pp. 478-485 (2004).
        [Gadre, A.P., Nijdam, A.J., Garra, J.A., Monica, A.H., Cheng, M.C., Luo, Cheng, Srivastava, Y.N., Schneider, T.W., Long, T.J., White, R.C.]. Sensors and Actuators. A, Physical. 114(2), 478-485.
      • Journal Article
        Releasing SU-8 structures using polystyrene as a sacrificial material. Sensors and Actuators A, 114, pp. 123-128 (2004).
        [Luo, Cheng, Govindaraju, Amitha, Garra, John, Schneider, Thomas, White, Robert, Currie, John, Paranjape, Makarand]. Sensors and Actuators. A, Physical. 114(1), 123-128.

      2003
      • Journal Article
        A simple deflection-testing method to determine Poisson’s ratio for MEMS applications. Journal of Micromechanics and Microengineering, 13, pp. 129-133 (2003).
        [Luo, Cheng, Schneider, T, White, R, Currie, J, Paranjape, M]. Journal of Micromechanics and Microengineering. 13, 129-133.
      • Journal Article
        Fabrication of a fluid encapsulated dermal patch using multilayered SU-8, Sensors and Actuators A, 114, pp. 478-485 (2004).
        [Gadre, A.P., Garra, J.A., Nijdam, A.J., Monica, A.H., Cheng, M.C., Luo, Cheng, Schneider, T.W., Long, T.J., White, R.C., Paranjape, M, Currie, JF]. ????.

      2002
      • Journal Article
        Determining local residual strains of polydimethylsiloxane using ink dots, and stiffening polydimethylsiloxane using SU-8 particles. Journal of Micromechanics and Microengineering, 12, pp. 1-5 (2002).
        [Luo, Cheng, Garra, John, Schneider, ThomasW., White, Robert, Currie, John, Paranjape, Makarand]. Journal of Micromechanics and Microengineering. 12(5), 677.
      • Journal Article
        The application of nanosecond-pulsed laser welding technology in MEMS packaging with a shadow mask. Sensors and Actuators A, 97-98, pp. 398-404 (2002).
        [Luo, Cheng, Lin, Liwei]. Sensors and Actuators. A, Physical. 97, 398-404.

      2001
      • Journal Article
        Comparison between the Material Symmetry Approaches of Gurtin and Noll. Journal of Elasticity, 60, pp. 35-56 (2001).
        [Luo, Cheng]. 64, 253-254.
      • Journal Article
        On conditions at an interface between two materials. Mathematics and Mechanics of Solids, 6, pp. 133-148 (2001).
        [Luo, Cheng]. Mathematics and Mechanics of Solids. 6, 183-200.

      2000
      • Journal Article
        On the material symmetry of elastic rods. Journal of Elasticity, 60, pp. 35-56 (2001).
        [Luo, Cheng, O’reilly, OliverM.]. 60(1), 35-56.

      1999
      • Journal Article
        On conditions at an interface between two materials in three-dimensional space. Mathematics and Mechanics of Solids, 4, pp. 183-200 (1999).
        [Wheeler, L., Luo, Cheng]. Mathematics and Mechanics of Solids. 4(2), 183-200.

      2011
      • Conference Proceeding
        Fabrication of Micropatterns on Channel Sidewalls using Strain-recovery Property a Shape Memory Polymer
        Proceedings of ASME 2011 International Mechanical Engineering Congress and Exposition
        [Chakraborty, A, Luo, Cheng].
      • Conference Proceeding
        Control Of The Radial Motion Of A Self-Propelled Microboat Throught A Side Rudder
        Proceedings of the 16th International Conference on Solid-State Sensors, Actuators and Microsystems
        [Qiao, L, Xiao, D, Luo, Cheng].
      • Conference Proceeding
        Development of a Self-propelled, Miniaturized PDMS Flotilla
        Proceedings of ASME Conference on Micromechatronics for Information and Precision Equipment
        [Li, H, Qiao, L, Liu, X, Luo, Cheng].
      • Conference Proceeding
        Development of microboats and microflotillas
        Proceedings of ASME Conference on Micromechatronics for Information and Precision Equipment
        [Luo, Cheng, Li, H, Qiao, L, Liu, X].
      • Conference Proceeding
        Fabrication Of Micropatterns On Channel Sidewalls Using Strain-Recovery Property Of A Shape Memory Polymer
        Proceedings of the 16th International Conference on Solid-State Sensors, Actuators and Microsystems
        [Chakraborty, A, Liu, X, Luo, Cheng].
      • Conference Proceeding
        Fabrication Of Two-tier ZnO Nanowires Structures
        Proceedings of ASME Conference on Micromechatronics for Information and Precision Equipment
        [Chakraborty, A, Wang, H, Luo, Cheng].
      • Conference Proceeding
        Reduction Of Drag Friction And Increase Of Loading Capacity For A Microboat Using Micropillars
        Proceedings of ASME Conference on Micromechatronics for Information and Precision Equipment
        [Qiao, L, Xiao, D, Luo, Cheng].
      • Conference Proceeding
        Transition From Cassie-Baxter To Wenzel States On Micropillar-Formed Surfaces Induced By Evaporation Or Pressing
        Proceedings of ASME Conference on Micromechatronics for Information and Precision Equipment
        [Xiang, M, Wang, H, Luo, Cheng].
      • Conference Proceeding
        Fabrication of Au Micropatterns on Vertical Si sidewalls Using Flexible PDMS Shadow Masks
        The Proceedings of NSF Grantee Conference
        [Luo, Cheng].
      • Conference Proceeding
        Generation Of Sidewall Patterns Using A Thermal Shape-Memory Polymer
        The Proceedings of NSF Grantee Conference
        [Luo, Cheng].
      • Conference Proceeding
        Numerical and Experimental Studies of an Intermediate-layer Lithography Approach
        The Proceedings of NSF Grantee Conference
        [Luo, Cheng].
      • Conference Proceeding
        Numerical and Experimental Studies of an Intermediate-layer Lithography Approach
        The Proceedings of NSF Grantee Conference
        [Luo, Cheng].

      2010
      • Conference Proceeding
        A simple approach to fabricate metal microlines on the outer surfaces of micropipettes
        Proceedings of ASME Conference on Micromechatronics for Information and Precision Equipment
        [Wang, H, Chakraborty, A, Luo, Cheng].
      • Conference Proceeding
        Development of a self-propelled water microflotilla
        Proceedings of ASME Conference on Micromechatronics for Information and Precision Equipment
        [Liu, X, Luo, Cheng].
      • Conference Proceeding
        Fabrication of au micropatterns on a vertical silicon sidewall using a PDMS membrane as the mask
        Proceedings of ASME Conference on Micromechatronics for Information and Precision Equipment
        [Wang, H, Chakraborty, A, Luo, Cheng].
      • Conference Proceeding
        Generation of spatial density gradient of ZnO nanowires on a planar surface
        Proceedings of ASME Conference on Micromechatronics for Information and Precision Equipment
        [Chakraborty, A, Wang, H, Liu, X, Luo, Cheng].

      2009
      • Conference Proceeding
        Theoretical, Numerical and Experimental Studies of an Intermediate-layer Lithography Approach
        Proceedings of NSF Grantee Conference
        [Luo, Cheng].

      2008
      • Conference Proceeding
        Development of Microboats
        Proceedings of ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment
        [Li, H, Luo, Cheng].
      • Conference Proceeding
        Review of an Intermediate-layer Lithography Method for Micro/nanofabrication
        MRS
        [Luo, Cheng].

      2007
      • Conference Proceeding
        Conducting Polymer Micropattern Sensor Arrays of High Sensitivity
        Proceedings of ASME Conference on Micromechatronics for Information and Precision Equipment
        [Chakraborty, A, Parthasarathi, G, Luo, Cheng].
      • Conference Proceeding
        Generation of Micro/nanopatterns of Conducting Polymers and Metals Using an Innovative Intermediate-layer Lithography Approach
        Proceedings of ASME Conference on Micromechatronics for Information and Precision Equipment
        [Luo, Cheng].
      • Conference Proceeding
        Fabrication of silicon nanobridge based pressure sensor
        Proceedings of Conference on Micro (MEMS) and Nanotechnologies for Space Applications
        [Li, H, Wang, H, Chakraborty, A, Liu, X, Luo, Cheng].
      • Conference Proceeding
        Generation of Conducting Polymer Based Diodes and Capacitors Using an Intermediate-layer Lithography
        Proceedings of Conference on Micro (MEMS) and Nanotechnologies for Space Applications
        [Liu, C, Luo, Cheng].
      • Conference Proceeding
        Generation of Silicon Nanowires Using a New Thinning and Trimming Method
        Proceedings of Conference on Micro (MEMS) and Nanotechnologies for Space Applications
        [Wang, H, Li, H, Chakraborty, A, Liu, X, Luo, Cheng].
      • Conference Proceeding
        Investigating the Conducting Polymer Micropattern Sensor Arrays. Generated Using Intermediate-layer Lithography
        Proceedings of Conference on Micro (MEMS) and Nanotechnologies for Space Applications
        [Chakraborty, A, Parthasarathi, G, Luo, Cheng].
      • Conference Proceeding
        Review of an Intermediate-layer Lithography Approach for micro/nanofabrication
        Proceedings of Conference on Micro (MEMS) and Nanotechnologies for Space Applications
        [Luo, Cheng].

      2006
      • Conference Proceeding
        An Innovative Intermediate-Layer Lithography Approach For Patterning Conducting Polymers
        Proceedings of 2006 NSF Design, Service, and Manufacturing Grantees and Research Conference
        [Luo, Cheng].
      • Conference Proceeding
        Multiple arrays of conducting polymer microwire based sensors
        ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment
        [Chakraborty, A, Parthasarathi, G, Luo, Cheng].
      • Conference Proceeding
        Reinforcement of pdms masters using silicon plates and patterning of biomaterials
        ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment
        [Fang, M, Liu, X, Sit, S, Luo, Cheng].
      • Conference Proceeding
        Electronic nose for detecting multiple targets
        Proceedings on Micro (MEMS) and Nanotechnologies for Space Applications
        [Chakraborty, A, Parthasarathi, G, Zhao, W, Luo, Cheng].
      • Conference Proceeding
        Theoretical and numerical studies of suspended silicon nanowire based static sensors
        Proceedings on Micro (MEMS) and Nanotechnologies for Space Applications
        [Hao, L, Liu, X, Luo, Cheng].

      2005
      • Conference Proceeding
        A new type of microcantilever-based mass sensors
        The Conference on Smart Electronics, MEMS, BioMEMS, and Nanotechnology, SPIE Symposium on Smart Structures and Materials
        [Luo, Cheng, Francis, A, Guo, Y].
      • Conference Proceeding
        A novel approach to fabricate metallic nano-cantilevers
        The Conference on Smart Electronics, MEMS, BioMEMS, and Nanotechnology, SPIE Symposium on Smart Structures and Materials
        [Luo, Cheng, Chakraborty, A].
      • Conference Proceeding
        An analytical relationship to determine compressive residual stress in a doubly-clamped microbeam according to its buckled shape
        The Conference on Smart Electronics, MEMS, BioMEMS, and Nanotechnology, SPIE Symposium on Smart Structures and Materials
        [Luo, Cheng, Francis, A, Liu, X].
      • Conference Proceeding
        An innovative all-polymeric drug-supply device
        The Conference on Smart Electronics, MEMS, BioMEMS, and Nanotechnology, SPIE Symposium on Smart Structures and Materials
        [Luo, Cheng, Liu, X, Poddar, R, Garra, J, Gadre, A, Schneider, T, White, R, Currie, J, Paranjape, M].
      • Conference Proceeding
        Reinforcement of PDMS using oxide-coated silicon plates
        The Conference on Smart Electronics, MEMS, BioMEMS, and Nanotechnology, SPIE Symposium on Smart Structures and Materials
        [Luo, Cheng, Meng, F, Guo, Y, Liu, X, Govindaraju, A].

      2003
      • Conference Proceeding
        Fabrication of an Epoxy Based Multi-layer Bio-Fluidic Dermal Patch
        11th international conference on solid-state sensors and actuators
        [Gadre, A, Garra, J, Nijdam, A, Monica, A, Cheng, M, Luo, Cheng, Schneider, T, Long, T, White, R, Paranjape, M, Currie, J].
      • Conference Proceeding
        Fabrication of an Epoxy Based Multi-layer Bio-Fluidic Dermal Patch
        11th international conference on solid-state sensors and actuators
        [Nijdam, A, Monica, A, Gadre, A, Long, T, Luo, Cheng, Cheng, M, Schneider, T, White, R, Paranjape, M, Currie, J].
      • Conference Proceeding
        Multi polymer fabrication of a biofluidic transdermal sampling device
        MicroTAS
        [Gadre, A, Srivastava, Y, Garra, J, Nijdam, A, Monica, A, Cheng, M, Luo, Cheng, Schneider, T, Long, T, White, R, Paranjape, M, Currie, J].
      • Conference Proceeding
        Polymethylmethacrylate as a fluid encapsulating membrane material in a micro fluidic device
        Eleventh Canadian Semiconductor Technology Conference
        [Srivastava, Y, Gadre, A, Garra, J, Nijdam, A, Monica, A, Cheng, M, Luo, Cheng, Schneider, T, Long, T, White, R, Paranjape, M, Currie, J].

      2002
      • Conference Proceeding
        A new method to release SU-8 structures using polystyrene for MEMS applications
        Proceedings of EuroSensors XVI
        [Luo, Cheng, Garra, J, Schneider, T, White, R, Currie, J, Paranjape, M].
      • Conference Proceeding
        Determining local residual strains of PDMS using ink dots, and stiffening PDMS using SU-8 particles
        Proceedings of EuroSensors XVI
        [Luo, Cheng, Garra, J, Schneider, T, White, R, Currie, J, Paranjape, M].
      • Conference Proceeding
        Two novel deflection-testing methods to determine Poisson’s ratio for MEMS applications
        Proceedings of EuroSensors XVI
        [Luo, Cheng, Schneider, T, White, R, Currie, J, Paranjape, M].

      2001
      • Conference Proceeding
        Nanosecond laser welding with a built-in mask for MEMS bonding
        10th international conference on solid-state sensors and actuators
        [Luo, Cheng, Lin, L, Chiao, M].

Presentations

    • July  2016
      Luo, Cheng, "A Simple Review of a Micropunching Lithography Method and its Applications", Shanghai Jiaotong University, Shanghai, China.. (July 1, 2016).
    • July  2016
      Luo, Cheng, "Angle Inequalities to Judge whether and how Liquid Drops Move on Bio-inspired Structures", Title Not Specified, Beihang University, China.. (July 1, 2016).
    • July  2016
      Luo, Cheng, "Angle Inequalities to Judge whether and how Liquid Drops Move on Bio-inspired Structures", University of Shanghai for Science and Technology, Shanghai, China.. (July 1, 2016).
    • June  2016
      Luo, Cheng, "Angle Inequalities to Judge whether and how Liquid Drops Move on Bio-inspired Structures", University of Shanghai for Science and Technology, Shenzhen University, China. (June 1, 2016).
    • June  2010
      Luo, Cheng, "A simple approach to fabricate metal microlines on the outer surfaces of micropipettes", Santa Clara, CA.. (June 1, 2010).
    • June  2010
      Luo, Cheng, "Development of a self-propelled water microflotilla", Santa Clara, CA.. (June 1, 2010).
    • June  2010
      Luo, Cheng, "Fabrication of au micropatterns on a vertical silicon sidewall using a PDMS membrane as the mask", Santa Clara, CA.. (June 1, 2010).
    • June  2010
      Luo, Cheng, "Generation of spatial density gradient of ZnO nanowires on a planar surface", Santa Clara, CA.. (June 1, 2010).
    • January  2009
      Luo, Cheng, "Development and characterization of super-hydrophobic microchannels", Shenzhen, China. (January 1, 2009).
    • January  2009
      Luo, Cheng, "Development of Microboats", Shenzhen, China. (January 1, 2009).
    • July  2008
      Luo, Cheng, "Review of an Intermediate-layer Lithography Method for Micro/nanofabrication", Department of Engineering Mechanics, Hunan University, China. (July 1, 2008).
    • July  2008
      Luo, Cheng, "Review of an Intermediate-layer Lithography Method for Micro/nanofabrication", Chongqing, China. (July 1, 2008).
    • October  2007
      Luo, Cheng, "Review of an Intermediate-layer Lithography Method for Micro/nanofabrication", Department of Materials Science and Engineering, University of Texas at Arlington. (October 1, 2007).
    • June  2007
      Luo, Cheng, "Review of an Intermediate-layer Lithography Method for Micro/nanofabrication", Santa Clara, CA.. (June 1, 2007).
    • April  2007
      Luo, Cheng, "Review of an Intermediate-layer Lithography Method for Micro/nanofabrication", Orlando, FL. (April 1, 2007).
    • June  2006
      Luo, Cheng, "Multiple arrays of conducting polymer microwire based sensors", ASME/JSME, Santa Clara, CA. (June 21, 2006).
    • June  2006
      Luo, Cheng, "Reinforcement of PDMS Masters and A Novel Patterning Method Using Si Mold", ASME/JSME, Santa Clara, CA.. (June 21, 2006).
    • April  2005
      Luo, Cheng, "A transdermal fluidic microsystem", University of Minnesota. (April 1, 2005).
    • March  2005
      Luo, Cheng, "A new type of microcantilever-based mass sensors", part of the SPIE Symposium on Smart Structures and Materials, San Diego, CA. (March 1, 2005).
    • March  2005
      Luo, Cheng, "A novel approach to fabricate metallic nano-cantilevers", SPIE Symposium on Smart Structures and Materials, San Diego, CA. (March 1, 2005).
    • March  2005
      Luo, Cheng, "An analytical relationship to determine compressive residual stress in a doubly-clamped", San Diego, CA. (March 1, 2005).
    • March  2005
      Luo, Cheng, "An analytical relationship to determine compressive residual stress in a doubly-clamped microbeam according to its buckled shape microbeam according to its buckled shape", San Diego, CA. (March 1, 2005).
    • March  2005
      Luo, Cheng, "An innovative all-polymeric drug-supply device", San Diego, CA. (March 1, 2005).
    • March  2005
      Luo, Cheng, "Reinforcement of PDMS using oxide-coated silicon plates", San Diego, CA. (March 1, 2005).
    • September  2002
      Luo, Cheng, "A biomicrosystem and six related results", University of Houston. (September 1, 2002).
    • June  2002
      Luo, Cheng, "Equations for the flexure, twist, and extension of fiber networks", Title Not Specified, Blacksbug, VA. (June 1, 2002).
    • April  2002
      Luo, Cheng, "A biomicrosystem and five related results", University of South Florida. (April 1, 2002).
    • January  2002
      Luo, Cheng, "Several issues in Solid Mechanics and MEMS", Georgetown University. (January 1, 2002).
    • June  2001
      Luo, Cheng, "Surface mechanics and MEMS", Georgetown University. (June 1, 2001).
    • April  2001
      Luo, Cheng, "Bending and twisting effects in the three-dimensional finite deformations of either extensible or inextensible fiber networks", University of Calgary, Canada. (April 1, 2001).
    • October  2000
      Luo, Cheng, "Debonding and measurement of interface strength by nanosecond laser technique in MEMS packaging", University of California at Berkeley. (October 1, 2000).
    • October  2000
      Luo, Cheng, "The application of nanosecond laser technology to MEMS bonding and packaging with a built-in mask", University of California at Berkeley. (October 1, 2000).
    • September  2000
      Luo, Cheng, "Nanosecond laser welding with a built-in mask for MEMS bonding and packaging", University of California at Berkeley. (September 1, 2000).
    • June  2000
      Luo, Cheng, "Glass-to-Metal seals and their applications to MEMS", University of California at Berkeley. (June 1, 2000).
    • May  2000
      Luo, Cheng, "Bending and twisting effects in the three-dimensional finite deformations of both extensible and inextensible fiber networks", University of Kentucky. (May 1, 2000).
    • May  1997
      Luo, Cheng, "Interface Conditions between two materials in 3-space", Title Not Specified, University of Houston. (May 1, 1997).

Students Supervised

    • Present
      Other
      1. Outstanding MS Student Award of Institute for Micromanufacturing at Louisiana Tech University (quarterly award): Amitha Govindaraju (in 04/2004) 2. Outstanding MS Student Award of Institute for Micromanufacturing at Louisiana Tech University (quarterly award): Anand John Francis (01/2005). 3. Outstanding MS Student Award of Biomedical Engineering at Louisiana Tech University (annual award): Fang Meng (in 11/2004). 4. Outstanding MS Student Award of Institute for Micromanufacturing at Louisiana Tech University (biannual award): Fang Meng (in 04/2006). 5. Outstanding PhD Student Award of Institute for Micromanufacturing at Louisiana Tech University (biannual award): Xinchuan Liu (in 04/2006). 6. Outstanding PhD Student Award of Institute for Micromanufacturing at Louisiana Tech University (biannual award): Anibran Chakraborty (in 04/2007). 7. Outstanding MS Student Award of Institute for Micromanufacturing at Louisiana Tech University (biannual award): Ganga Parthasarathi (in 04/2007). 8. LaSpace Undergraduate Research Assistantship Winners: Stephen McMullan and Scott Jewett ($5k each for 09/2006-08/2007). 9. Student scholarship Winner of 18th ASME Annual Conference on Information Storage and Processing Systems, June 2008, Santa Clara, CA: Hao Li. 10. Title of Year 2011 "University Scholar": Hui Wang (this award recognizes top 1 percent of the student body at UTA who exemplify academic excellence.) 11. UTA Nanofab Best Graduate Student of Year 2011: Hui Wang. 12. Two awards for Xin Heng from 2015 UTA Annual Celebration of Excellence by Students: (i) Graduate Sustainability Award (2 out of 70 as announced by the committee chair); and (ii) President's Poster Award (First Place, 1 out of 41).
      Student Award Winners
    • Present
      Other

      MS students
    • Present
      Other

      PhD students
    • Present
      Other

      Post-docs
    • Present
      Other

      Undergraduate students

Courses

      • AE 5331-001 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2020 Download Syllabus
      • AE 5331-002 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2020
      • AE 5331-900 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2020
      • ME 6699-011 DISSERTATION
        (Course Id: 103490)
        Fall - Regular Academic Session - 2020
      • MAE 2360-001 NUMERICAL ANALYSIS/PROGRAMMING
        (Course Id: 103612)
        Fall - Regular Academic Session - 2020 Download Syllabus
      • MAE 2360-002 NUMERICAL ANALYSIS/PROGRAMMING
        (Course Id: 103612)
        Fall - Regular Academic Session - 2020
      • MAE 2360-003 NUMERICAL ANALYSIS/PROGRAMMING
        (Course Id: 103612)
        Fall - Regular Academic Session - 2020
      • ME 6997-011 RESEARCH
        (Course Id: 103493)
        Fall - Regular Academic Session - 2020
      • ME 7399-011 DOCTORAL DEGREE COMPLETION
        (Course Id: 111647)
        Summer - 2020
      • ME 6697-011 RESEARCH
        (Course Id: 103489)
        Summer - Eleven Week - 2020
      • ME 6699-011 DISSERTATION
        (Course Id: 103490)
        Spring - Regular Academic Session - 2020
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Spring - Regular Academic Session - 2020
      • ME 6697-011 RESEARCH
        (Course Id: 103489)
        Spring - Regular Academic Session - 2020
      • AE 5331-001 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2019
      • AE 5331-002 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2019
      • ME 6699-011 DISSERTATION
        (Course Id: 103490)
        Fall - Regular Academic Session - 2019
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2019
      • ME 6697-011 RESEARCH
        (Course Id: 103489)
        Fall - Regular Academic Session - 2019
      • ME 6997-011 RESEARCH
        (Course Id: 103493)
        Fall - Regular Academic Session - 2019
      • ME 6196-011 MECHANICAL ENGR INTERNSHIP
        (Course Id: 110864)
        Summer - Eleven Week - 2019
      • ME 5332-001 ENGINEERING ANALYSIS
        (Course Id: 103426)
        Spring - Regular Academic Session - 2019
      • ME 5332-002 ENGINEERING ANALYSIS
        (Course Id: 103426)
        Spring - Regular Academic Session - 2019
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Spring - Regular Academic Session - 2019
      • ME 6697-011 RESEARCH
        (Course Id: 103489)
        Spring - Regular Academic Session - 2019
      • ME 6997-011 RESEARCH
        (Course Id: 103493)
        Spring - Regular Academic Session - 2019
      • ME 6297-011 RESEARCH
        (Course Id: 103464)
        Fall - Regular Academic Session - 2018
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2018
      • ME 6697-011 RESEARCH
        (Course Id: 103489)
        Fall - Regular Academic Session - 2018
      • ME 6196-011 MECHANICAL ENGR INTERNSHIP
        (Course Id: 110864)
        Summer - Eleven Week - 2018
      • ME 6697-011 RESEARCH
        (Course Id: 103489)
        Summer - Eleven Week - 2018
      • ME 5332-001 ENGINEERING ANALYSIS
        (Course Id: 103426)
        Spring - Regular Academic Session - 2018
      • ME 5332-002 ENGINEERING ANALYSIS
        (Course Id: 103426)
        Spring - Regular Academic Session - 2018 Download Syllabus
      • ME 6297-011 RESEARCH
        (Course Id: 103464)
        Spring - Regular Academic Session - 2018
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Spring - Regular Academic Session - 2018
      • ME 6697-011 RESEARCH
        (Course Id: 103489)
        Spring - Regular Academic Session - 2018
      • ME 5698-011 THESIS
        (Course Id: 103461)
        Spring - Regular Academic Session - 2018
      • AE 5331-001 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2017
      • AE 5331-002 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2017 Download Syllabus
      • ME 6297-011 RESEARCH
        (Course Id: 103464)
        Fall - Regular Academic Session - 2017
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2017
      • ME 5390-001 SPEC TOPICS MECH ENGR
        (Topic: Micro/Nano Fabrication | Course Id: 103456)
        Fall - Regular Academic Session - 2017 Download Syllabus
      • ME 5390-101 SPEC TOPICS MECH ENGR
        (Topic: Micro/Nano Fabrication | Course Id: 103456)
        Fall - Regular Academic Session - 2017 Download Syllabus
      • ME 5332-001 ENGINEERING ANALYSIS
        (Course Id: 103426)
        Spring - Regular Academic Session - 2017
      • ME 5332-002 ENGINEERING ANALYSIS
        (Course Id: 103426)
        Spring - Regular Academic Session - 2017
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Spring - Regular Academic Session - 2017
      • AE 5331-001 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2016
      • AE 5331-002 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2016
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2016
      • ME 5390-002 SPEC TOPICS MECH ENGR
        (Topic: Micro/Nano Fabrication | Course Id: 103456)
        Fall - Regular Academic Session - 2016
      • ME 5390-012 SPEC TOPICS MECH ENGR
        (Topic: Micro/Nano Fabrication | Course Id: 103456)
        Fall - Regular Academic Session - 2016
      • ME 5698-011 THESIS
        (Course Id: 103461)
        Fall - Regular Academic Session - 2016
      • ME 5191-011 PROJECT STUDIES MECHANICAL ENG
        (Course Id: 103389)
        Summer - Eleven Week - 2016
      • ME 5332-006 ENGINEERING ANALYSIS
        (Course Id: 103426)
        Spring - Regular Academic Session - 2016
      • ME 5332-007 ENGINEERING ANALYSIS
        (Course Id: 103426)
        Spring - Regular Academic Session - 2016
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Spring - Regular Academic Session - 2016
      • ME 5398-011 THESIS
        (Course Id: 103460)
        Spring - Regular Academic Session - 2016
      • ME 5698-011 THESIS
        (Course Id: 103461)
        Spring - Regular Academic Session - 2016
      • AE 5331-001 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2015
      • AE 5331-002 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2015
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2015
      • ME 5390-004 SPEC TOPICS MECH ENGR
        (Topic: Micro/Nano Fabrication | Course Id: 103456)
        Fall - Regular Academic Session - 2015
      • ME 5398-011 THESIS
        (Course Id: 103460)
        Fall - Regular Academic Session - 2015
      • ME 5698-011 THESIS
        (Course Id: 103461)
        Fall - Regular Academic Session - 2015
      • ME 6699-011 DISSERTATION
        (Course Id: 103490)
        Spring - Regular Academic Session - 2015
      • ME 5332-005 ENGINEERING ANALYSIS
        (Course Id: 103426)
        Spring - Regular Academic Session - 2015
      • ME 5698-011 THESIS
        (Course Id: 103461)
        Spring - Regular Academic Session - 2015
      • AE 5331-001 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2014
      • AE 5331-002 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2014
      • ME 6399-011 DISSERTATION
        (Course Id: 103486)
        Fall - Regular Academic Session - 2014
      • ME 6297-011 RESEARCH
        (Course Id: 103464)
        Fall - Regular Academic Session - 2014
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2014
      • ME 5390-004 SPEC TOPICS MECH ENGR
        (Topic: Micro/Nano Fabrication | Course Id: 103456)
        Fall - Regular Academic Session - 2014
      • ME 7399-011 DOCTORAL DEGREE COMPLETION
        (Course Id: 111647)
        Summer - Eleven Week - 2014
      • ME 5698-011 THESIS
        (Course Id: 103461)
        Summer - Eleven Week - 2014
      • ME 6699-011 DISSERTATION
        (Course Id: 103490)
        Spring - Regular Academic Session - 2014
      • MAE 3360-002 ENGINEERING ANALYSIS
        (Course Id: 103647)
        Spring - Regular Academic Session - 2014
      • ME 5698-011 THESIS
        (Course Id: 103461)
        Spring - Regular Academic Session - 2014
      • AE 5331-001 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2013
      • AE 5331-002 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2013
      • ME 6297-011 RESEARCH
        (Course Id: 103464)
        Fall - Regular Academic Session - 2013
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2013
      • ME 6697-011 RESEARCH
        (Course Id: 103489)
        Fall - Regular Academic Session - 2013
      • ME 5390-003 SPEC TOPICS MECH ENGR
        (Topic: Micro/Nano Fabrication | Course Id: 103456)
        Fall - Regular Academic Session - 2013
      • ME 7399-011 DOCTORAL DEGREE COMPLETION
        (Course Id: 111647)
        Summer - Eleven Week - 2013
      • ME 6697-011 RESEARCH
        (Course Id: 103489)
        Summer - Eleven Week - 2013
      • ME 5391-011 ADV STUDIES MECH ENGR
        (Course Id: 103457)
        Spring - Regular Academic Session - 2013
      • ME 6999-011 DISSERTATION
        (Course Id: 103494)
        Spring - Regular Academic Session - 2013
      • ME 6297-011 RESEARCH
        (Course Id: 103464)
        Spring - Regular Academic Session - 2013
      • ME 6697-011 RESEARCH
        (Course Id: 103489)
        Spring - Regular Academic Session - 2013
      • AE 5331-001 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2012
      • AE 5331-002 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2012
      • ME 6297-011 RESEARCH
        (Course Id: 103464)
        Fall - Regular Academic Session - 2012
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2012
      • ME 6697-011 RESEARCH
        (Course Id: 103489)
        Fall - Regular Academic Session - 2012
      • ME 5390-003 SPEC TOPICS MECH ENGR
        (Topic: Micro/Nano Fabrication | Course Id: 103456)
        Fall - Regular Academic Session - 2012
      • ME 6697-011 RESEARCH
        (Course Id: 103489)
        Summer - Eleven Week - 2012
      • ME 5332-001 ENGINEERING ANALYSIS
        (Course Id: 103426)
        Spring - Regular Academic Session - 2012
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Spring - Regular Academic Session - 2012
      • ME 6997-011 RESEARCH
        (Course Id: 103493)
        Spring - Regular Academic Session - 2012
      • AE 5331-001 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2011
      • AE 5331-002 ANALYTIC METHODS ENGINEERING
        (Course Id: 101950)
        Fall - Regular Academic Session - 2011
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2011
      • ME 5390-009 SPEC TOPICS MECH ENGR
        (Topic: Mico/Nanolithography | Course Id: 103456)
        Fall - Regular Academic Session - 2011
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Summer - Eleven Week - 2011
      • ME 6999-011 DISSERTATION
        (Course Id: 103494)
        Spring - Regular Academic Session - 2011
      • ME 5332-001 ENGINEERING ANALYSIS
        (Course Id: 103426)
        Spring - Regular Academic Session - 2011
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Spring - Regular Academic Session - 2011
      • AE 5351-001 ANALYTIC METHODS ENGINEERING
        (Course Id: 101969)
        Fall - Regular Academic Session - 2010
      • AE 5351-002 ANALYTIC METHODS ENGINEERING
        (Course Id: 101969)
        Fall - Regular Academic Session - 2010
      • ME 6999-011 DISSERTATION
        (Course Id: 103494)
        Fall - Regular Academic Session - 2010
      • MAE 3360-001 ENGINEERING ANALYSIS
        (Course Id: 103647)
        Fall - Regular Academic Session - 2010
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2010
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Summer - Eleven Week - 2010
      • ME 6697-011 RESEARCH
        (Course Id: 103489)
        Summer - Eleven Week - 2010
      • ME 5332-001 ENGINEERING ANALYSIS
        (Course Id: 103426)
        Spring - Regular Academic Session - 2010
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Spring - Regular Academic Session - 2010
      • ME 6697-011 RESEARCH
        (Course Id: 103489)
        Spring - Regular Academic Session - 2010
      • AE 5351-001 ANALYTIC METHODS ENGINEERING
        (Course Id: 101969)
        Fall - Regular Academic Session - 2009
      • AE 5351-002 ANALYTIC METHODS ENGINEERING
        (Course Id: 101969)
        Fall - Regular Academic Session - 2009
      • ME 6999-011 DISSERTATION
        (Course Id: 103494)
        Fall - Regular Academic Session - 2009
      • MAE 3360-002 ENGINEERING ANALYSIS
        (Course Id: 103647)
        Fall - Regular Academic Session - 2009
      • ME 6397-011 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2009
      • ME 6697-011 RESEARCH
        (Course Id: 103489)
        Fall - Regular Academic Session - 2009

Service to the Profession

    • Jan 2012 to  Present
      Committee Chair
      Mechanical Engineering Committee of Graduate Studies
    • Oct 2011 to  Present
      Committee Member
      Search Committee for Associate Dean of Research, College of Engineering
    • Nov 2010 to  Present
      Committee Member
      Louisiana Tech University
    • Sept 2010 to  Present
      Committee Chair
      Discipline Committee of Design, Manufacturing and Multidisciplinary Optimization
    • Aug 2010 to  Present
      Committee Member
      Advisory Committee to Department Chair
    • Sept 2009 to  Present
      Committee Member
      Departmental Diagnostic Exam
    • Sept 2009 to  Present
      Facilitator
      Departmental Diagnostic Exam
      In the Subject of Solid Mechanics and Structural Design
    • 2009 to  Present
      Committee Member
      Departmental Faculty Search Committee
    • Mar 2005 to  Present
      Session Chair
      SPIE conference
      Nanomaterials and Nanowires" in the SPIE conference on Smart Electronics, MEMS, BioMEMS, and Nanotechnology, 03/2005.
    • 2003 to  Present
      Editorial Board Member
      Various Journals
      (i) Nano Bulletin; (ii) Journal of Visualized Experiments; and (iii) Micromachines.
    • 2003 to  Present
      Manuscript Peer Reviewer
      Various Journals
      Manuscript peer reviewer: Nanotechnology, Sensors and Actuators A, Journal of Micromechanics and Microengineering, Smart Materials and Structures, Polymers, Chemistry of Materials, Royal Society Proceedings of Science A, ASME Journal of Biomechanical Engineering, Journal of Physics A, Journal of Elasticity, Mathematics and Mechanics of Solids, IEEE/ASME Journal of Microelectromechanical Systems, Journal of Manufacturing Science and Engineering, Microsystem Technnologies, Journal of Nanoengineering and Nanosystems, Biomedical Microdevices, Microfluidics and Nanofluidics, IEEE Sensors Journal, Langmuir, and Biosensors and Bioelectronics.
    • Jan 2012 to  Aug 2015
      Committee Chair
      Departmental Committee of ME PhD Diagnostic Exams
    • Past to  July 2013
      Session Chair
      Conference of Society of Engineering Science
    • Oct 2011 to  Apr 2012
      Member of Strategy Planning Committee
      College of Engineering
    • Nov 2011 to  Nov 2011
      Chair and Organizer of Symposium on Micro & Nano Mechatronics
      ASME 2011 International Mechanical Engineering Congress and Exposition
    • Past to  June 2011
      Conference Committee Member/Track Co-chair and Co-organizer
      2011 ASME Conference on Micromechatronics for Information and Precision Equipment
    • Past to  Dec 2010
      Panelist
      NSF
      NSF panelist for unsolicited proposals in Washington, DC, 12/2010.
    • Past to  Nov 2010
      External Reviewer for Tenure and Promotion
      Louisiana Tech University
    • Past to  May 2009
      Panelist
      NSF
      Panelist for unsolicited proposals in Washington, DC
    • Past to  Jan 2009
      Session Chair
      Fourth IEEE NEMS Conference
    • Past to  July 2008
      External Proposal Reviewer
      Auburn University
    • Past to  June 2008
      Committee Member (Santa Clara, CA,
      ASME Conference on Micromechatronics for Information and Precision Equipment
    • Past to  Apr 2008
      Committee Member (Orlando, Florida, United States )
      SPIE conference on Micro (MEMS) and Nanotechnologies for Space Applications
    • Past to  Jan 2008
      Technical Committee Member (Sanya, Hainan Island, China)
      3rd IEEE NEMS Conference
    • 2003 to  2007
      Committee Member
      Travel Grant Approval Committee of the College of Engineering and Science at Louisiana Tech University
    • Past to  Apr 2007
      Session Chair
      SPIE Conference on Micro (MEMS) and Nanotechnologies for Space Applications
      Nanowire Devices" in the SPIE conference on Micro (MEMS) and Nanotechnologies for Space Applications, Orlando, FL, 04/2007.
    • Past to  Mar 2007
      Committee Member
      SPIE Symposium on Smart Structures and Materials
      Conference on Smart Electronics, MEMS, BioMEMS, and Nanotechnology, part of the SPIE Symposium on Smart Structures and Materials, San Diego, CA, 03/2007.
    • Jan 2003 to  Jan 2007
      Committee Member
      Graduate Committee of Biomedical Engineering Program at Louisiana Tech University
    • Past to  2006
      Panelist
      National Science Foundation
      For unsolicited proposals
    • Past to  2006
      Panelist
      National Science Foundation
      National Science Foundation panelist for Nanoscale Exploratory Research proposals in Washington, DC, 2006.
    • Past to  2006
      Panelist
      National Science Foundation
      National Science Foundation panelist for unsolicited proposals in Washington, DC, 2006.
    • Past to  Apr 2006
      Session Chair
      SPIE conference
      High Performance MEMS/Nano-Sensors" in the SPIE conference on Micro (MEMS) and Nanotechnologies for Space Applications, Orlando, FL, 04/2006.
    • Past to  Mar 2006
      Committee Member
      SPIE Symposium
      Conference on Smart Electronics, MEMS, BioMEMS, and Nanotechnology, part of the SPIE Symposium on Smart Structures and Materials, San Diego, CA, 03/2006.
    • 2005 to  2005
      Co-facilitator of 2005 Written PhD Qualifier Exam
      College of Engineering at Louisiana Tech University.
    • Past to  Mar 2005
      Session Chair
      SPIE conference
      Microsensor, Actuators, and MEMS III" in the SPIE conference on Smart Electronics, MEMS, BioMEMS, and Nanotechnology, 03/2005.
    • 2004 to  2004
      Panelist
      National Science Foundation
      Nano Interdisciplinary Research Team proposals
    • 2003 to  2003
      Panelist (Washington, DC,
      National Science Foundation
      Panelist for unsolicited proposals
    • Sept 2003 to  Nov 2003
      Seminar Organizer
      Biomedical Engineering Program at Louisiana Tech University