avatar

Dr Daejong Kim

[Dr Daejong Kim]

Associate Professor, Mechanical and Aerospace Engineering
Last Updated: September 29, 2020
about me

Education

Education

    • 2004 PhD in Mechanical Eng
      The University of Texas at Austin, 2004
    • 1993 MS in Mechanical Eng and Production Engineering
      Seoul National University, 1993
    • 1991 BS in Mechanical Eng and Production Engineering
      Seoul National University, 1991

Appointments

Appointments

    • Sept 2014 to Present Associate Professor
      Mechanical and Aerospace Engineering, University of Texas at Arlington (Arlington, TX, United States)
    • Aug 2008 to Aug 2014 Assistant Professor
      Mechanical and Aerospace Engineerin, University of Texas Arlington
    • Sept 2004 to July 2008 Assistant Professor
      Mechanical Engineering, Texas A&M University (College Station, TX)
      Undergraduate Courses: MEEN 364 Dynamic Systems and Control: Fall 2004, Spring 2006, Spring 2007, Fall 2007 MEEN 260 Introduction to Engineering Experimentation: Spring 2005, Fall 2005, Fall 2006, Fall 2007 MEEN 432 Automotive Engineering, Spring 2008 Graduate Courses: MEEN 613 Engineering Dynamics: Fall 2006
    • Sept 1999 to July 2000 Senior Design Engineer
      R&D Center, Mirae Corporation (Pundang, Korea, Republic of)
      • Designed linear synchronous motor and X-Y stage for precision electro-mechanical devices • Performed thermal and structural analysis of linear motor and precision X-Y stage
    • Mar 1995 to June 1999 Design and Research Engineer
      R&D Center, Renault Samsung Motors (Kiheung, Korea, Republic of)
      • Designed piston assembly, connecting rod, crankshaft and engine bearings • Characterized tribological performance of engine bearings, piston rings and valve trains
    • Mar 1993 to Feb 1995 Research Engineer
      Noise and Vibration Group, Samsung Electronics (Suwon, Korea, Republic of)
      • Performed analytical and experimental research to identify rotor dynamics behavior and to reduce noise and vibration of rotary and reciprocal compressors

Memberships

    • Jan 2004 to Present Society of Tribologists and Lubrication Engineers
      Member
    • Jan 2000 to Present American Society of Mechanical Engineers
      Member

Awards and Honors

    • Oct  2016 Foreign Expert Friendship Award sponsored by YANZHAO
    • Jan  2013 Summer Research Fellow, Aerospace System Directorate, RQTM sponsored by AFOSR
    • Jan  2011 Summer Research Fellow, Propulsion Directorate, RZTM sponsored by AFOSR
    • Jan  2010 Summer Research Fellow, Propulsion Directorate, RZTM sponsored by AFOSR
    • Jan  2009 Summer Research Fellow, Propulsion Directorate, RZTM sponsored by AFOSR
    • Jan  2008 Best Reviewer Award sponsored by ASME Journal of Tribology
    • Jan  2005 Innovative Research Award on Micro Gas Bearings sponsored by ASME - Tribology Division
    • Jan  2002 Argonne Science Award sponsored by University Technology Transfer Competition

Other Activities

Other Activities

      • May 2014
        - Foil bearing design for 2kWe combined heat and power systems (UK)
        Samad Power
      • Jan 2014
        - 12kWe Beta engine support (UK)
        Bladon Jet
      • June 2012
        Feasibility study of foil bearings for 300W micro turbo alternator
        Azmark Aero
      • Dec 2011
        - Preliminary design of foil bearings for Bladon 12kW turbo alternator. This preliminary work brought a UTA contract ($108,963) in April 2012.
        Brayton Energy (US) and Bladon Jet (UK)
      • June 2011
        - Technical and practical feasibility of 120kW class gas turbines with foil bearings - Trend and current state of the art of foil bearing technology for micro-gas turbines
        Korean Institute of Machinery and Material
      • Nov 2007
        - Fault diagnosis of ball bearing failure in twin-spool turbocharger - Design guideline for oil-free bearings for remotely mounted exhaust heat recovery system
        Caterpillar

Support & Funding

Support & Funding

This data is entered manually by the author of the profile and may duplicate data in the Sponsored Projects section.
    • Jan 2020 to Dec 2020 High-Power Density Fuel Cell Air Compressor with Foil Bearings sponsored by  -  $140000
      Daejong Kim (Funded)
    • Aug 2018 to Aug 2020 Design of Advanced Foil Bearings for Refrigerant Turbo Compressors sponsored by  -  $50856
      Daejong Kim (Funded)
    • Dec 2018 to Nov 2019 Feasibility Study of Intelligent Robot Systems for Inspection and Maintenance of Steel Making Facilities sponsored by  -  $79999
      Daejong Kim (Funded)
    • Aug 2018 to Mar 2019 Verification Testing of Foil Bearings for SBIR AF181-035 sponsored by  -  $26996
      Daejong Kim (Funded)
    • Nov 2019 to May 2020 Integrated Design Solution of High-Power Density Permanent Magnet Motors and Generators with Foil Bearings sponsored by  -  $124945
      Daejong Kim (Funded)
    • Aug 2017 to July 2018 Advanced Air Bearing Solution for ARPA-E 1kW Genset sponsored by  -  $150000
      Daejong Kim (Funded)
    • Aug 2015 to May 2017 Development of Foil Bearings for 350kW Organic Rankine Cycle Turbo Expander sponsored by  -  $248536
      Daejong Kim (Funded)
    • Sept 2015 to Sept 2016 Improved Turbo/Superchargerfor UAV Applications sponsored by  -  $63184
      Daejong Kim (Funded)
    • Aug 2015 to July 2016 Foil Bearings with Advanced PVD Coating for Improved Damping and Reliability sponsored by  -  $15546
      Daejong Kim (Funded)
    • Sept 2016 to Dec 2016 Development of foil bearings with PVD coating: Phase I sponsored by  -  $24468
      Daejong Kim (Funded)
    • Jan 2012 to Dec 2014 Development of EngineeringTools for Non-Linear Transient 3-Dimensional Rotordynamics and Thermal Analyses of Oil-Free Micro Gas Turbines sponsored by  -  $96188
      Daejong Kim (Funded)
    • July 2012 to Aug 2013 Development of Foil Bearing Systems for Azmark 4kW Turbo Alternator to be Developed for IARPA GHO Unmanned Air Vehicle sponsored by  -  $142253
      Daejong Kim (Funded)
    • Apr 2012 to July 2013 Development of Oil-Free Bearing Systems for 12kW Brayton Cycle Turbo Alternator sponsored by  -  $108380
      Daejong Kim (Funded)
    • Apr 2014 to Dec 2014 Foil Bearing for Electric Motor-assisted turbochargers for UAS/UGS Application sponsored by  -  $33999
      Daejong Kim (Funded)
    • Nov 2011 to Oct 2012 Developing of Foil Bearing Systems for Azmark 4kW Turbo Alternator to be Developed for IARPA GHO Unmanned Air Vehicle sponsored by  -  $50000
      Daejong Kim (Funded)
    • Oct 2011 to Dec 2011 Design Improvement of 4 sponsored by  -  $5303
      Daejong Kim (Funded)
    • Jan 2009 to Dec 2011 Air Foil Bearing Technology for High Temperature Turbines sponsored by  -  $113596
      Daejong Kim (Funded)
    • Feb 2009 to May 2009 Design and Manufacturing of Hydrostatic Air Foil Bearing for Air Force Research Laboratory sponsored by  -  $30000
      Daejong Kim (Funded)
    • July 2010 to July 2011 Low-Cost Compliant Foil Thrust Bearing for Extended-Life Micro Gas Turbine Engines sponsored by  -  $24994
      Daejong Kim (Funded)
    • May 2008 to Jan 2011 Transient Computational Model for Thermal Stability of Gas-Lubricated Bearings sponsored by  -  $133996
      Daejong Kim (Funded)
    • Aug 2008 to Mar 2010 Design and Performance Test of Mesoscale Gas Bearings sponsored by  -  $42570
      Daejong Kim (Funded)

Publications


      2013
      • Book Chapter
        Hydrostatic-hybrid gas bearings
        Springer Encyclopedia of Tribology
        [Kim, Daejong].
      • Book Chapter
        Tilting pad gas bearings
        Springer Encyclopedia of Tribology
        [Kim, Daejong].

      2020
      In Process
      • Journal Article
        Hydrostatic foil thrust bearings; prediction and experimental measurements of static performance
        [LaTray, NguyenT., Kim, Daejong, Song, Myongsok]. Journal of Tribology. "ASME". In Preparation; Not Yet Submitted.
      • Journal Article
        Design feature and experimental demonstration of 200mm hybrid foil bearings
        [LaTray, Nguyen T., Kim, Daejong, Honavara-Prasad, Srikanth]. Journal of Tribology. "ASME". In Preparation; Not Yet Submitted.
      • Journal Article
        Experimental study on the effectiveness of pressure recovery of rotating vaneless diffusor
        [LaTray, NguyenT., Kim, Daejong]. Journal of Tribology. "ASME". In Preparation; Not Yet Submitted.
      • Journal Article
        Numerical and Experimental Study on Air Thrust Foil Bearing Performance with Improved Structural Model Based on Real-time Taper Inlet Height
        [Xu, Fancheng, Hou, Liukai, Kim, Daejong, Wu, Bin]. Proceedings of the iMeche, Part J: Journal of Engineering Tribology. Revising to Resubmit.

      2018
      • Journal Article
        Effect of circumferential location of Radial Injection on Rotordynamic Performance of Hybrid Air Foil Bearings
        [Yazdi, BehzadZamanian, Kim, Daejong]. ASME Journal of Engineering for Gas Turbine and Power. 140(12),
        DOI 10.1115/1.4041646
      • Journal Article
        Rotordynamic Performance of Hybrid Air Foil Bearings With Regulated Hydrostatic Injection
        [ Yazdi, BehzadZamanian, Kim, Daejong]. ASME Journal of Engineering for Gas Turbines and Power. 140(1),
        DOI 10.1115/1.4037667
      • Journal Article
        Rotordynamics Performance of Hybrid Foil Bearing Under Forced Vibration Input
        [Kim, Daejong, Nicholson, Brian, Rosado, Lewis, Givan, Garry]. ASME Journal of Engineering for Gas Turbines and Power. 140(1),
        DOI 10.1115/1.4037624

      2017
      • Journal Article
        Rotordynamic Performance of a Shaft With Large Overhung Mass Supported by Foil Bearings
        [LaTray, Nguyen, Kim, Daejong]. ASME Journal of Engineering for Gas Turbines and Power. 139(4),
        DOI 10.1115/1.4034918

      2016
      • Journal Article
        Scaling Laws for Radial Clearance and Support Structure Stiffness of Radial Foil Bearings
        [Prasad, SrikanthHonavara, Kim, Daejong]. ASME Journal of Engineering for Gas Turbines and Power. 139(4),
        DOI 10.1115/1.4034648
      • Journal Article
        Design Space of Foil Bearings for Closed-Loop Supercritical CO2 Power Cycles Based on Three-Dimensional Thermohydrodynamic Analyses
        [Kim, Daejong]. ASME Journal of Engineering for Gas Turbines and Power. 138(3), DOI: http://dx.doi.org/10.1115/1.4031433
        DOI 10.1115/1.4031433

      2014
      • Journal Article
        Evaluation of Foil Bearing Performance and Nonlinear Rotordynamics of 120 kW Oil-Free Gas Turbine Generator
        [Kim, Daejong, Lee, Ansung, Choi, Bumseok]. ASME Journal of Engineering for Gas Turbines and Power. 136(3), DOI: http://dx.doi.org/10.1115/1.4025898
        DOI 10.1115/1.4025898
      • Journal Article
        Experimental Identification of Force Coefficients of Large Hybrid Air Foil Bearings
        [Wang, YuPing, Kim, Daejong]. ASME Journal of Engineering for Gas Turbines and Power. 136(3),
        DOI 10.1115/1.4025891

      2013
      • Journal Article
        Design of three-pad hybrid air foil bearing and experimental investigation on static performance at zero running speed
        [Kim, Daejong, Lee, Donghyun]. ASME Journal of Engineering for Gas Turbines and Power. 132(12),
        DOI 10.1115/1.4001066
      • Journal Article
        Thermo-hydrodynamic analyses of bump air foil bearings with detailed thermal model of foil structures and rotor
        [Lee, Donghyun, Kim, Daejong]. ASME Journal of Tribology. 132(2),
        DOI 10.1115/1.4001014
      • Journal Article
        Experimental feasibility study of radial injection cooling of three-pad radial air foil bearings
        [Shrestha, SumanK., Kim, Daejong, Kim, Youngcheol]. ASME Journal of Tribology. 51(1),
        DOI 10.1115/1.4024547

      2012
      • Journal Article
        Extended Three-Dimensional Thermo-Hydrodynamic Model of Radial Foil Bearing: Case Studies on Thermal Behaviors and Dynamic Characteristics in Gas Turbine Simulator
        [Kim, Daejong, Kim, Youngcheol, Ahn, Kookyoung, Ki, Jeongpill]. ASME Journal of Engineering for Gas Turbines and Power. 134(5), DOI: http://dx.doi.org/10.1115/1.4005215
        DOI 10.1115/1.4005215
      • Journal Article
        Start-Stop Characteristics and Thermal Behavior of a Large Hybrid Airfoil Bearing For Aero-Propulsion Applications
        [Kim, Daejong, Zimbru, George]. ASME Journal of Engineering for Gas Turbines and Power. 134(3), DOI: http://dx.doi.org/10.1115/1.4004487
        DOI 10.1115/1.4004487

      2011
      • Journal Article
        Design and performance prediction of hybrid air foil thrust bearings
        [Lee, Donghyun, Kim, Daejong]. ASME Journal of Engineering for Gas Turbines and Power. 133(4),
        DOI 10.1115/1.4002249

      2009
      • Journal Article
        Design and Manufacturing of Meso Scale Tilting Pad Gas Bearings for 100~200W Class PowerMEMS Applications
        [Kim, Daejong, Rimpel, AaronM., Chang, Suksang, Kim, Jonghyun]. ASME Journal of Engineering for Gas Turbines and Power. 131(4), DOI: http://dx.doi.org/10.1115/1.3077643
        DOI 10.1115/1.3077643
      • Journal Article
        Mesoscale Foil Gas Bearings for Palm-Sized Turbomachinery: Design, Manufacturing, and Modeling
        [Kim, Daejong, Creary, Andron, Chang, Suksang, Kim, Jonghyun]. ASME Journal of Engineering for Gas Turbines and Power. 131(4), DOI: http://dx.doi.org/10.1115/1.3077643
        DOI 10.1115/1.3077643

      2008
      • Journal Article
        Thermo-hydrodynamic Analysis of Compliant Flexure Pivot Tilting Pad Gas Bearings
        [Sim, Kyuho, Kim, Daejong]. ASME Journal of Engineering for Gas Turbines and Power. 130(3),
        DOI 10.1115/1.2836616

      2007
      • Journal Article
        Parametric Studies on Static and Dynamic Performance of Air Foil Bearings with Different Top Foil Geometries and Bump Stiffness Distributions
        [Kim, Daejong]. ASME Journal of Tribology. 129(2),
        DOI 10.1115/1.2540065

      2006
      2005
      • Journal Article
        A micro corona motor
        [Lee, Sanghoon, Kim, Daejong, Bryant, MichaelD., Ling, FrederickF.]. Sensors and Actuators. A, Physical. 118(2), 226-232.
      • Journal Article
        Tribological study of microbearings for MEMS applications
        [Kim, Daejong, Cao, Dongmei, Bryant, MichaelD., Meng, Wenjin, Ling, FrederickF.]. Journal of Tribology. 127(3), 537-547.

      2004
      • Journal Article
        A Micro corona motor fabricated by a SU-8 built-on X-ray mask
        [Lee, Sun-Goo, Kim, Daejong, Jin, Y., Han, Y., Desta, Y., Bryant, M.D., Goettert, J.]. Microsystem Technologies. 10(6), 522-526.
      • Journal Article
        Hydrodynamic performance of gas microbearings
        [Kim, Daejong, Lee, Sanghoon, Bryant, MichaelD., Ling, FrederickF.]. Journal of Tribology. 126(4), 711-718.
      • Journal Article
        Micro gas bearings fabricated by deep X-ray lithography
        [Kim, Daejong, Lee, Sun-Goo, Jin, Y., Desta, Y., Bryant, M.D., Goettert, J.]. Microsystem Technologies. 10(6), 456-461.

      In Process
      • Conference Proceeding
        Foil bearing technology for high speed single stage compressors for fuel cell applications
        [LaTray, Nguyen T., Kim, Daejong]. Harbin, China, September 10-11: "7th International Conference on Turbocharging technology". Accepted.

      2018
      • Conference Proceeding
        A High Speed Test Rig Capable of Running at 190,000rpm to Characterize Gas Foil Thrust Bearings
        [LaTray, NguyenT, Kim, Daejong]. "Proceedings of ASME Turbo Expo 2018, June 11-15, 2018, Lillestrøm, Norway, Paper No. GT2018-77111".
      • Conference Proceeding
        Effect of axial force on rotordynamics of a rigid rotor supported by foil bearings
        [Liu, Wanhui, Kim, Daejong, Feng, Kai]. "Proceedings of ASME Turbo Expo 2018, June 11-15, 2018, Lillestrøm, Norway, Paper No. GT2018-76261".
      • Conference Proceeding
        Effect of circumferential location of Radial Injection on Rotordynamic Performance of Hybrid Air Foil Bearings
        [Yazdi , Behzad Zamanian, Kim, Daejong]. "Proceedings of ASME Turbo Expo 2018, June 11-15, 2018, Lillestrøm, Norway, Paper No. GT2018-75983".

      2017
      • Conference Proceeding
        Design Approach for Large Foil Bearings Considering Rotordynamics
        [Honavara-Prasad, Srikanth, Kim, Daejong]. "Proceedings of ASME Turbo Expo 2017, June 26 – 30, 2017, Charlotte, NC USA, Paper No. GT2017-65105 ".
      • Conference Proceeding
        Rotordynamic Performance of Hybrid Air Foil Bearings With Regulated Hydrostatic Injection
        [Yazdi, BehzadZamanian, Kim, Daejong]. "Proceedings of ASME Turbo Expo 2017, June 26 – 30, 2017, Charlotte, NC USA, Paper No. GT2017-63495".
      • Conference Proceeding
        Rotordynamics Performance of Hybrid Foil Bearing Under Forced Vibration Input
        [Kim, Daejong, Nicholson, Brian, Rosado, Lewis, Givan, Garry]. "Proceedings of ASME Turbo Expo 2017, June 26 – 30, 2017, Charlotte, NC USA, Paper No. GT2017-65233 ".

      2016
      • Conference Proceeding
        Three-dimensional turbulent thermo-elastohydrodynamic analyses of hybrid thrust foil bearings using real gas model
        [Xu, Fangcheng, Kim, Daejong]. "Proceedings of ASME Turbo Expo 2016, June 13-17, Seoul, South Korea, Paper No. GT2016-57766".
      • Conference Proceeding
        Enhancement of the Rotordynamic Performance of a Shaft Supported by Air Foil Bearings With Vibration Damper
        [Yazdi, BehzadZamanian, Kim, Daejong, Xu, Fangcheng]. "Proceedings of ASME Turbo Expo 2016, June 13-17, Seoul, South Korea, Paper No. GT2016-56790".
      • Conference Proceeding
        Rotordynamic Performance of a Shaft With Large Overhung Mass Supported by Foil Bearings
        [LaTray, NguyenT., Kim, Daejong]. "Proceedings of ASME Turbo Expo 2016, June 13-17, Seoul, South Korea, Paper No. GT2016-56508 ".
      • Conference Proceeding
        Scaling Laws of Radial Clearance and Bump Stiffness of Radial Foil Bearings
        [Honavara-Prasad, Srikanth, Kim, Daejong]. "Proceedings of ASME Turbo Expo 2016, June 13-17, Seoul, South Korea, Paper No. GT2016-56704".
      • Conference Proceeding
        Theoretical Study of Top Foil Sagging Effect on the Performance of Air Thrust Foil Bearing
        [Xu, Fangcheng, Kim, Daejong, Yazdi, BehzadZamanian]. "Proceedings of ASME Turbo Expo 2016, June 13-17, Seoul, South Korea, Paper No. GT2016-56493".

      2015
      • Conference Proceeding
        Design Space of Foil Bearings for Closed-Loop Supercritical CO2 Power Cycles Based on Three-Dimensional Thermohydrodynamic Analyses
        [Kim, Daejong]. "Proceedings of Turbo Expo 2015, June 15-19, 2015, Montreal, Canada, Paper No. GT2015-43982".

      2013
      • Conference Proceeding
        Evaluation of foil bearing performance and nonlinear rotordynamics of 120 kw oil-free gas turbine generator
        [Kim, Daejong, Lee, Ansung, Choi, Bumseog]. "Proceedings of Turbo Expo 2013, June 3-7, 2013, SanAntonio, USA, Paper No. GT2013-95800".
      • Conference Proceeding
        Experimental Identification of Force Coefficients of Large Hybrid Air Foil Bearings
        [Wang, YuPing, Kim, Daejong]. "Proceedings of Turbo Expo 2013, June 3-7, 2013, SanAntonio, USA, Paper No. GT2013-95765".

      2012
      • Conference Proceeding
        Feasibility Study Of T700 Rotorcraft Engine Rotor Supported By Hybrid Air Foil Bearings
        [Varrey, MaheshKumar, Kim, Daejong]. "68th American Helicopter Society Annual Forum & Technology Display, May 1-3, 2012, Fort Worth, Texas".

      2011
      • Conference Proceeding
        Five millimeter air foil bearing operating at 350,000 rpm in a micro electric motor drive
        [Kim, Daejong, Hossain, Md. Saddam, Son, Soo-Jung, Choi, Chul-Jin, Krhenbhl, Daniel]. "International Joint Tribology Conference, IJTC 2011-61146, Oct 24-26, Los Angeles, California".
      • Conference Proceeding
        Imbalance response of a rotor supported by hybrid air foil bearings
        [Kim, Daejong, Shetty, Prajwal, Lee, Donghyun]. "Proceedings of Turbo Expo 2011, June 6-10, 2011, Vancouver, Canada, Paper No. GT 2011-45576".
      • Conference Proceeding
        Extended three-dimensional thermo-hydrodynamic model of radial foil bearing: case studies on thermal behaviors and dynamic characteristics in gas turbine simulator
        [Kim, Daejong, Ki, Jeongpill, Kim, Youngcheol, Ahn, Kookyoung]. "International Joint Tribology Conference, IJTC 2011-61129, Oct 24-26, Los Angeles, California".

      2010
      • Conference Proceeding
        Comparison of Thermo-Hydrodynamic Characteristics of Airfoil Bearings With Different Top Foil Geometries
        [Kim, Daejong, Lee, Donghyun, Kim, Youngcheol, Ahn, Kookyoung]. "Proceedings of the 8th IFToMM International Conference on Rotordynamics, September 12-15, 2010, KIST, Seoul, Korea".
      • Conference Proceeding
        Five Degrees of Freedom Nonlinear Rotor Dynamics Model of a Rigid Rotor Supported by Multiple Airfoil Bearings
        [Lee, Donghyun, Kim, Daejong]. "Proceedings of the 8th IFToMM International Conference on Rotordynamics, September 12-15, 2010, KIST, Seoul, Korea".

      2009
      • Conference Proceeding
        Hydrostatic air foil bearings: Analytical and experimental investigation
        [Kim, Daejong, Park, Soongook]. 42, 413-425. "Elsevier".
      • Conference Proceeding
        Experimental and analytical studies on flexure pivot tilting pad gas bearings with dampers applied to radially compliant pads
        ASME Turbo Expo 2009 Turbomachinery Technical Conference and Exposition
        [Kim, Daejong, Rimpel, Aaron]. "American Society of Mechanical Engineers".

      2008
      • Conference Proceeding
        LIGA-Fabricated Meso Scale Foil Gas Bearings for Palm-Sized Microturbomachinery
        Proceedings of the STLE/ASME International Joint Tribology Conference
        [Kim, Daejong, Creary, Andron].

      2007
      • Conference Proceeding
        Experimental Studies on Flexure Pivot Tilting Pad Gas Bearings with Pad Radial Compliance
        STLE/ASME International Joint Tribology Conference (IJTC), San Diego, California
        [Sim, Kyuho, Rimpel, Aaron, Kim, Daejong].
      • Conference Proceeding
        Foil gas bearing with compression springs: analyses and experiments
        [Song, Ju-ho, Kim, Daejong]. 129, 628-639. "American Society of Mechanical Engineers".
      • Conference Proceeding
        Parametric Studies on Dynamic Performance of Hydrostatic Flexure Pivot Tilting Pad Gas Bearing With Radial Compliance
        ASME/STLE 2007 International Joint Tribology Conference
        [Petro, RobertN., Kim, Daejong]. 331-333. "American Society of Mechanical Engineers".
      • Conference Proceeding
        Revisit to stiffness of bump foils in air foil bearings
        Proceedings of ASME/STLE International Joint Tribology Conference, IJTC2007-44319
        [Kim, Daejong, Ezeka, Chinedu, Kumar, Manish].
      • Conference Proceeding
        Stability characteristics of a rigid rotor supported by a gas-lubricated spiral-groove conical bearing
        [Pan, CodaH., Kim, Daejong]. 129, 375-383. "American Society of Mechanical Engineers".

      2006
      • Conference Proceeding
        A new foil gas bearing with compression springs as compliant structure for microturbomachinery applications
        Proceedings of the ASME Turbo Expo
        [Song, Ju-ho, Kim, Daejong]. 5, 419-428.
      • Conference Proceeding
        Hybrid air foil bearings with external pressurization
        ASME 2006 International Mechanical Engineering Congress and Exposition
        [Kim, Daejong, Park, Soonkuk]. 63-69. "American Society of Mechanical Engineers".
      • Conference Proceeding
        Stability Analyses on Flexure Pivot Tilting Pad Gas Bearings for Microturbomachinery
        [Sim, Kyuho, Kim, Daejong]. 12158,

      2004
      • Conference Proceeding
        Virtual design of LIGA fabricated meso scale gas bearings for microturbomahinery
        The sixth int. workshop on micro and nanotechnology for power generation and energy conversion applications. Nov.–Dec., Berkley (USA)
        [Kim, Daejong].

Presentations

    • May  2016
      Prabhakar, Arvind, Kim, Daejong, "Design consideration of thrust foil bearings operating with refrigerant gas", Las Vegas, Nevada. (May 18, 2016).
    • May  2015
      Kim, Daejong, "Analyses of Static and Dynamic Performance of CO2-Lubricated Foil bearings using 3-Dimensional Turbulent Thermo-hydrodynamic Model Including Real Gas Effect", Dallas, Texas. (May 18, 2015).
    • May  2015
      Kim, Daejong, "Analyses of Static Performance and Power Loss of Thrust Foil Bearings for Closed Loop Supercritical CO2 Power Cycles using 3-Dimensional Turbulent Thermo-Hydrodynamic Model", Dallas, Texas. (May 18, 2015).
    • May  2015
      Zamanian Yazdi, Behzad, Kim, Daejong, "Investigation on Stability and Rotordynamic Performance of Preloaded Semi-Active Hybrid Air Foil Bearing", Dallas, Texas. (May 18, 2015).
    • October  2014
      Kim, Daejong, Xu, Fangcheng, "Dynamic Performance of Foil Bearings with Non-linear Foil Stiffness Model", Chicago, Illinois . (October 26, 2014).
    • October  2014
      Zamanian Yazdi, Behzad, Kim, Daejong, "Rotordynamic performance of a rigid rotor supported by foil bearings with vibration damper around the bearing sleeve", Chicago, Illinois . (October 26, 2014).
    • May  2014
      Kim, Daejong, Nicholson, Brian, Givan, Garry, Rosado, Lewis, "Rotordynamics Characteristics of Large Hybrid Air Foil Bearings under Controlled External Disturbances", Lake Buena Vista, Florida. (May 18, 2014).
    • May  2013
      Kim, Daejong, Honavara-Prasad, Srikanth, "Thermo-Hydrodynamic Model of Foil Bearings for Supercritical CO2 Power Cycles", Detroit, Michigan . (May 5, 2013).
    • October  2012
      Kim, Daejong, Shrestha, Suman, Kim, Youngcheol, "Thermal behavior of three-pad radial foil bearing under different cooling methods", Denver, Colorado. (October 7, 2012).
    • October  2010
      Honavara-Prasad, Srikanth, Kim, Daejong, Ki, Jeongpill, "Computational Model for Transient and Steady State Characteristics of a One-dimensional Steam Reformer", San Antonio, Texas. (October 18, 2010).
    • October  2010
      Ki, Jeongpill, Kim, Daejong, Honavara-Prasad, Srikanth, "Dynamic Modeling of Two Dimensional Compact Heat Exchange Reformer For High Temperature Fuel Cell Systems", San Antonio, Texas. (October 18, 2010).
    • May  2010
      Kim, Daejong, Lee, Donghyun, "Design of three-pad hybrid air foil bearing and experimental investigation on static performance", Las Vegas, Nevada. (May 18, 2010).
    • November  2009
      Kim, Daejong, Ki, Jeongpill, "Analytical Model to Predict Thermal Dynamics of Planar Solid Oxide Fuel Cell Stack During Start-up Process", Palm Spring, California. (November 16, 2009).
    • November  2009
      Kim, Daejong, Majors, Christopher, Kadjo, Louise, Turpin, Alexander, "Thermal dynamic model of heat exchangers for fuel cell applications", Palm Spring, California. (November 16, 2009).
    • May  2008
      Kim, Daejong, Sim, Kyuho, "Thermo-hydrodynamic Analysis of Compliant Flexure Pivot Tilting Pad Gas Bearings", Cleveland, Ohio. (May 18, 2008).

Students Supervised

    • Present
      Undergraduate Supervised Research
      Quan Tran, (Mech and Aero Engineering)
    • Present
      Undergraduate Capstone/Senior Project
      (Mech and Aero Engineering)
    • Present
      Undergraduate Supervised Research
      Sixu Zhou,
    • Present
      Master's Thesis Committee Chair
      Jyothish Venkata Atluri,
    • Present
      Master's Thesis Committee Chair
      Ramaswamy Kasyap Pantangi,
    • Feb 2019
      Dissertation Committee Chair
      Amirreza Niazmand, Left group in March 2019 (Mech and Aero Engineering)
    • Dec 2018
      Dissertation Committee Chair
      Nguyen LaTray, (Mech and Aero Engineering)
      Thrust bearing with pocket grooves and tailored bump stiffness distribution for improved static performance
    • Dec 2018
      Dissertation Committee Chair
      Srikanth Honavara-Prasad, (Mech and Aero Engineering)
      Design principles for large foil bearings based on scaling law: Analyses and Experiment
    • Aug 2018
      Master's Thesis Committee Chair
      Sri Ram Gaddameedi, (Mech and Aero Engineering)
    • May 2018
      Master's Thesis Committee Chair
      Myoungsok Song, (Mech and Aero Engineering)
      Deign and experimental study of hydrostatic thrust air foil bearing
    • Dec 2017
      Master's Thesis Committee Chair
      Vaibhav Vijay Indulkar, (Mech and Aero Engineering)
      Computational model for steady state simulation of a solid oxide fuel cell (SOFC) planner stack model with internal reforming process
    • Dec 2017
      Dissertation Committee Chair
      Behzad Yazdi,
      Semi-active control of hybrid air foil bearings for rotordynamics enhancement
    • Sept 2016
      Postdoctoral Research Supervision
      Xu Fangcheng,
    • May 2016
      Master's Thesis Committee Chair
      Arvind Prabhakar ,
      Graduated Students MS
      Design consideration and steady state study of thrust bearings in high speed subsonic applications
    • Dec 2015
      Master's Thesis Committee Chair
      Ajit Rajesh Desai, (Mech and Aero Engineering)
      Computational model for steady state simulation of a plate-fin heat exchanger
    • May 2015
      Master's Thesis Committee Chair
      SASHIDHAR RAGHURAMAN, (Mech and Aero Engineering)
      Performance evaluation of a compliant foil seal
    • Dec 2013
      Undergraduate Capstone/Senior Project
    • Dec 2013
      Master's Thesis Committee Chair
      Tejas Patil, (Mech and Aero Engineering)
      Novel thermal management of foil bearing at turbine hot section
    • Oct 2013
      Postdoctoral Research Supervision
      Jeongpill Ki, UTA
      Integrated Modeling Approach for Solid Oxide Fuel Cell-Based Power Generation System
    • Aug 2013
      Dissertation Committee Co-Chair
      Hicham Chibli, Student from TAMU. Co-Chaired with Professor Schoberei (Mech and Aero Engineering)
      Aerodynamic Investigations of Axial Flow Turbines
    • May 2013
      Master's Thesis Committee Chair
      Rohit Yadav, (Mech and Aero Engineering)
      Development of Foil Thrust Bearing Test Rig
    • May 2013
      Dissertation Committee Chair
      Jeongpill Ki, (Mech and Aero Engineering)
      Graduated Students PhD
      Integrated Modeling Approach for Solid Oxide Fuel Cell-Based Power Generation System
    • Dec 2012
      Master's Thesis Committee Chair
      Shrikant Yadav, (Mech and Aero Engineering)
      Dynamic Performance of Offset-Preloaded Two Pad Foil Bearings
    • Aug 2012
      Master's Thesis Committee Chair
      Yuping Wang, (Mech and Aero Engineering)
      Experimental Identification of Force Coefficients of Hybrid Air Foil Bearings
    • May 2012
      Master's Thesis Committee Chair
      Suman Shrestha, (Mech and Aero Engineering)
      Experimental Feasibility Study of Radial Injection Cooling of Three-pad radial air foil bearings
    • Dec 2011
      Undergraduate Capstone/Senior Project
    • Dec 2011
      Master's Thesis Committee Chair
      Mahesh Kumar Varrey, (Mech and Aero Engineering)
      Feasibility Study of T700 rotorcraft Engine Rotor Supported by Hybrid Air Foil Bearings
    • Dec 2010
      Master's Thesis Committee Chair
      Prajwal Krishna Shetty, (Mech and Aero Engineering)
      Imbalance response of a four degree of freedom rigid rotor supported by hybrid three-pad air foil bearings
    • Dec 2010
      Master's Thesis Committee Chair
      Ramesh Pandeshwara Sadashiva, (Mech and Aero Engineering)
      Experimental investigation of thermal behavior of air foil bearings
    • Dec 2010
      Master's Thesis Committee Chair
      Srikanth Honavara-Prasad, (Mech and Aero Engineering)
      Computational model for transient and steady state analysis of a 1-dimensional auto thermal reformer
    • Sept 2010
      Postdoctoral Research Supervision
      Donghyun Lee, KAIST
      Thermal Modeling of Foil Bearings
    • Dec 2009
      Undergraduate Capstone/Senior Project
      Presented in 2009 Fuel Cell Conference and Exhibition
      Transient Response of a Cross-Flow Heat Exchanger
    • Aug 2008
      Master's Thesis Committee Chair
      Aaron Rimpel, (Mech and Aero Engineering)
      Analysis of Flexure pivot tilting pad gas bearings with different damper configurations
    • Aug 2008
      Master's Thesis Committee Chair
      Manish Kumar, (Mech and Aero Engineering)
      Analytical and experimental investigation of hybrid air foil bearings
    • Aug 2007
      Master's Thesis Committee Chair
      Soongook Park, (Mech and Aero Engineering)
      Hybrid air foil bearing with external pressurization
    • Aug 2007
      Dissertation Committee Chair
      Kyuho Sim, (Mech and Aero Engineering)
      Rotordynamic and thermal analyses of compliant flexure pivot tilting pad gas bearings
    • Aug 2006
      Master's Thesis Committee Chair
      Juho Song, (Mech and Aero Engineering)
      Design, analyses, and experimental study of a foil gas bearing with compression springs as a compliant support

Courses

      • MAE 3313-003 FLUID MECHANICS
        (Course Id: 103608)
        Fall - Regular Academic Session - 2020 Download Syllabus
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Fall - Regular Academic Session - 2020 Download Syllabus
      • AE 5397-035 RESEARCH IN AEROSPACE ENGINEER
        (Course Id: 112457)
        Fall - Regular Academic Session - 2020
      • MAE 4302-001 BEARING DESIGN/LUBRICATION
        (Course Id: 112678)
        Spring - Regular Academic Session - 2020
      • ME 5302-001 BEARING DESIGN/LUBRICATION
        (Course Id: 112759)
        Spring - Regular Academic Session - 2020
      • ME 5302-002 BEARING DESIGN/LUBRICATION
        (Course Id: 112759)
        Spring - Regular Academic Session - 2020
      • MAE 3313-001 FLUID MECHANICS
        (Course Id: 103608)
        Spring - Regular Academic Session - 2020
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Spring - Regular Academic Session - 2020 Download Syllabus
      • ME 5698-035 THESIS
        (Course Id: 103461)
        Spring - Regular Academic Session - 2020
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Fall - Regular Academic Session - 2019 Download Syllabus
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2019
      • ME 5398-035 THESIS
        (Course Id: 103460)
        Fall - Regular Academic Session - 2019
      • MAE 2314-001 FLUID MECHANICS I
        (Course Id: 103608)
        Spring - Regular Academic Session - 2019 Download Syllabus
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Spring - Regular Academic Session - 2019 Download Syllabus
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Spring - Regular Academic Session - 2019
      • ME 6697-035 RESEARCH
        (Course Id: 103489)
        Spring - Regular Academic Session - 2019
      • ME 6399-035 DISSERTATION
        (Course Id: 103486)
        Fall - Regular Academic Session - 2018
      • AE 7399-035 DOCTORAL DEGREE COMPLETION
        (Course Id: 111647)
        Fall - Regular Academic Session - 2018
      • ME 7399-035 DOCTORAL DEGREE COMPLETION
        (Course Id: 111647)
        Fall - Regular Academic Session - 2018
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Fall - Regular Academic Session - 2018 Download Syllabus
      • ME 6196-035 MECHANICAL ENGR INTERNSHIP
        (Course Id: 110864)
        Fall - Regular Academic Session - 2018
      • ME 6297-035 RESEARCH
        (Course Id: 103464)
        Fall - Regular Academic Session - 2018
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2018
      • ME 6697-035 RESEARCH
        (Course Id: 103489)
        Fall - Regular Academic Session - 2018
      • AE 6699-035 DISSERTATION
        (Course Id: 101999)
        Spring - Regular Academic Session - 2018
      • ME 6399-035 DISSERTATION
        (Course Id: 103486)
        Spring - Regular Academic Session - 2018
      • MAE 2314-001 FLUID MECHANICS I
        (Course Id: 103608)
        Spring - Regular Academic Session - 2018 Download Syllabus
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Spring - Regular Academic Session - 2018 Download Syllabus
      • ME 6697-035 RESEARCH
        (Course Id: 103489)
        Spring - Regular Academic Session - 2018
      • AE 6297-035 RESEARCH AEROSPACE ENGINEERING
        (Course Id: 101985)
        Spring - Regular Academic Session - 2018
      • AE 6397-035 RESEARCH AEROSPACE ENGINEERING
        (Course Id: 101994)
        Spring - Regular Academic Session - 2018
      • AE 6697-035 RESEARCH IN AEROSPACE ENGRG
        (Course Id: 101998)
        Spring - Regular Academic Session - 2018
      • ME 5698-035 THESIS
        (Course Id: 103461)
        Spring - Regular Academic Session - 2018
      • ME 7399-035 DOCTORAL DEGREE COMPLETION
        (Course Id: 111647)
        Fall - Regular Academic Session - 2017
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Fall - Regular Academic Session - 2017 Download Syllabus
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2017
      • AE 6397-035 RESEARCH AEROSPACE ENGINEERING
        (Course Id: 101994)
        Fall - Regular Academic Session - 2017
      • AE 5397-035 RESEARCH IN AEROSPACE ENGINEER
        (Course Id: 112457)
        Fall - Regular Academic Session - 2017
      • AE 6697-035 RESEARCH IN AEROSPACE ENGRG
        (Course Id: 101998)
        Fall - Regular Academic Session - 2017
      • ME 5698-035 THESIS
        (Course Id: 103461)
        Fall - Regular Academic Session - 2017
      • ME 6196-035 MECHANICAL ENGR INTERNSHIP
        (Course Id: 110864)
        Summer - Eleven Week - 2017
      • ME 6399-035 DISSERTATION
        (Course Id: 103486)
        Spring - Regular Academic Session - 2017
      • MAE 2314-001 FLUID MECHANICS I
        (Course Id: 103608)
        Spring - Regular Academic Session - 2017
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Spring - Regular Academic Session - 2017
      • ME 6196-035 MECHANICAL ENGR INTERNSHIP
        (Course Id: 110864)
        Spring - Regular Academic Session - 2017
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Spring - Regular Academic Session - 2017
      • AE 6397-035 RESEARCH AEROSPACE ENGINEERING
        (Course Id: 101994)
        Spring - Regular Academic Session - 2017
      • AE 6697-035 RESEARCH IN AEROSPACE ENGRG
        (Course Id: 101998)
        Spring - Regular Academic Session - 2017
      • ME 5698-035 THESIS
        (Course Id: 103461)
        Spring - Regular Academic Session - 2017
      • ME 6399-035 DISSERTATION
        (Course Id: 103486)
        Fall - Regular Academic Session - 2016
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Fall - Regular Academic Session - 2016
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2016
      • AE 6397-035 RESEARCH AEROSPACE ENGINEERING
        (Course Id: 101994)
        Fall - Regular Academic Session - 2016
      • AE 6697-035 RESEARCH IN AEROSPACE ENGRG
        (Course Id: 101998)
        Fall - Regular Academic Session - 2016
      • MAE 2314-001 FLUID MECHANICS I
        (Course Id: 103608)
        Spring - Regular Academic Session - 2016
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Spring - Regular Academic Session - 2016
      • ME 6997-035 RESEARCH
        (Course Id: 103493)
        Spring - Regular Academic Session - 2016
      • AE 6397-035 RESEARCH AEROSPACE ENGINEERING
        (Course Id: 101994)
        Spring - Regular Academic Session - 2016
      • AE 6697-035 RESEARCH IN AEROSPACE ENGRG
        (Course Id: 101998)
        Spring - Regular Academic Session - 2016
      • ME 5698-035 THESIS
        (Course Id: 103461)
        Spring - Regular Academic Session - 2016
      • ME 5366-001 FUEL CELLS AND APPLICATIONS
        (Course Id: 111883)
        Fall - Regular Academic Session - 2015
      • ME 5366-002 FUEL CELLS AND APPLICATIONS
        (Course Id: 111883)
        Fall - Regular Academic Session - 2015 Download Syllabus
      • ME 5366-003 FUEL CELLS AND APPLICATIONS
        (Course Id: 111883)
        Fall - Regular Academic Session - 2015
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Fall - Regular Academic Session - 2015
      • ME 6297-035 RESEARCH
        (Course Id: 103464)
        Fall - Regular Academic Session - 2015
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2015
      • ME 6697-035 RESEARCH
        (Course Id: 103489)
        Fall - Regular Academic Session - 2015
      • AE 6697-035 RESEARCH IN AEROSPACE ENGRG
        (Course Id: 101998)
        Fall - Regular Academic Session - 2015
      • ME 5698-035 THESIS
        (Course Id: 103461)
        Fall - Regular Academic Session - 2015
      • ME 6196-035 MECHANICAL ENGR INTERNSHIP
        (Course Id: 110864)
        Summer - Eleven Week - 2015
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Summer - Eleven Week - 2015
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Spring - Regular Academic Session - 2015
      • MAE 3242-001 MECHANICAL DESIGN I
        (Course Id: 103623)
        Spring - Regular Academic Session - 2015 Download Syllabus
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Spring - Regular Academic Session - 2015
      • AE 6397-035 RESEARCH AEROSPACE ENGINEERING
        (Course Id: 101994)
        Spring - Regular Academic Session - 2015
      • ME 5398-035 THESIS
        (Course Id: 103460)
        Spring - Regular Academic Session - 2015
      • ME 5698-035 THESIS
        (Course Id: 103461)
        Spring - Regular Academic Session - 2015
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Fall - Regular Academic Session - 2014
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2014
      • MAE 3311-002 THERMODYNAMICS II
        (Course Id: 103632)
        Fall - Regular Academic Session - 2014 Download Syllabus
      • AE 5698-035 THESIS
        (Course Id: 101982)
        Fall - Regular Academic Session - 2014
      • AE 6196-035 AEROSPACE ENGR INTERNSHIP
        (Course Id: 111774)
        Summer - Eleven Week - 2014
      • ME 5698-035 THESIS
        (Course Id: 103461)
        Summer - Eleven Week - 2014
      • AE 6196-035 AEROSPACE ENGR INTERNSHIP
        (Course Id: 111774)
        Spring - Regular Academic Session - 2014
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Spring - Regular Academic Session - 2014
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Spring - Regular Academic Session - 2014
      • MAE 4301-002 SPEC TOPICS MECH & AERO ENGR
        (Topic: Bearing Design and Lubrication | Course Id: 103659)
        Spring - Regular Academic Session - 2014
      • ME 5390-002 SPEC TOPICS MECH ENGR
        (Topic: Bearing Design and Lubrication | Course Id: 103456)
        Spring - Regular Academic Session - 2014
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Fall - Regular Academic Session - 2013
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2013
      • AE 6397-035 RESEARCH AEROSPACE ENGINEERING
        (Course Id: 101994)
        Fall - Regular Academic Session - 2013
      • ME 5698-035 THESIS
        (Course Id: 103461)
        Fall - Regular Academic Session - 2013
      • ME 7399-035 DOCTORAL DEGREE COMPLETION
        (Course Id: 111647)
        Spring - Regular Academic Session - 2013
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Spring - Regular Academic Session - 2013
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Spring - Regular Academic Session - 2013
      • MAE 4301-006 SPEC TOPICS MECH & AERO ENGR
        (Topic: Applied Tribology in Bearing D | Course Id: 103659)
        Spring - Regular Academic Session - 2013 Download Syllabus
      • ME 5390-006 SPEC TOPICS MECH ENGR
        (Topic: Applied Tribology in Bearing D | Course Id: 103456)
        Spring - Regular Academic Session - 2013 Download Syllabus
      • ME 5398-035 THESIS
        (Course Id: 103460)
        Spring - Regular Academic Session - 2013
      • ME 5698-035 THESIS
        (Course Id: 103461)
        Spring - Regular Academic Session - 2013
      • ME 6699-035 DISSERTATION
        (Course Id: 103490)
        Fall - Regular Academic Session - 2012
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Fall - Regular Academic Session - 2012
      • ME 6196-035 MECHANICAL ENGR INTERNSHIP
        (Course Id: 110864)
        Fall - Regular Academic Session - 2012
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2012
      • ME 5398-035 THESIS
        (Course Id: 103460)
        Fall - Regular Academic Session - 2012
      • ME 5698-035 THESIS
        (Course Id: 103461)
        Fall - Regular Academic Session - 2012
      • ME 6196-035 MECHANICAL ENGR INTERNSHIP
        (Course Id: 110864)
        Summer - Eleven Week - 2012
      • ME 6697-035 RESEARCH
        (Course Id: 103489)
        Summer - Eleven Week - 2012
      • AE 5698-035 THESIS
        (Course Id: 101982)
        Summer - Eleven Week - 2012
      • ME 6399-035 DISSERTATION
        (Course Id: 103486)
        Spring - Regular Academic Session - 2012
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Spring - Regular Academic Session - 2012
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Spring - Regular Academic Session - 2012
      • MAE 4301-006 SPEC TOPICS MECH & AERO ENGR
        (Topic: Applied Tribology in Bearing D | Course Id: 103659)
        Spring - Regular Academic Session - 2012 Download Syllabus
      • ME 5390-006 SPEC TOPICS MECH ENGR
        (Topic: Gas Lubrication Theory | Course Id: 103456)
        Spring - Regular Academic Session - 2012 Download Syllabus
      • AE 5698-035 THESIS
        (Course Id: 101982)
        Spring - Regular Academic Session - 2012
      • ME 5398-035 THESIS
        (Course Id: 103460)
        Spring - Regular Academic Session - 2012
      • ME 5698-035 THESIS
        (Course Id: 103461)
        Spring - Regular Academic Session - 2012
      • ME 6699-035 DISSERTATION
        (Course Id: 103490)
        Fall - Regular Academic Session - 2011
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Fall - Regular Academic Session - 2011
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2011
      • MAE 4301-005 SPEC TOPICS MECH & AERO ENGR
        (Topic: Intro to Alternative Energy Sy | Course Id: 103659)
        Fall - Regular Academic Session - 2011
      • ME 5390-012 SPEC TOPICS MECH ENGR
        (Topic: Intro Alternative Energy Systm | Course Id: 103456)
        Fall - Regular Academic Session - 2011
      • ME 5398-035 THESIS
        (Course Id: 103460)
        Fall - Regular Academic Session - 2011
      • ME 5698-035 THESIS
        (Course Id: 103461)
        Fall - Regular Academic Session - 2011
      • ME 6399-035 DISSERTATION
        (Course Id: 103486)
        Summer - Eleven Week - 2011
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Summer - Eleven Week - 2011
      • ME 6697-035 RESEARCH
        (Course Id: 103489)
        Summer - Eleven Week - 2011
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Spring - Regular Academic Session - 2011
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Spring - Regular Academic Session - 2011
      • ME 5698-035 THESIS
        (Course Id: 103461)
        Spring - Regular Academic Session - 2011
      • ME 5391-035 ADV STUDIES MECH ENGR
        (Course Id: 103457)
        Fall - Regular Academic Session - 2010
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Fall - Regular Academic Session - 2010
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2010
      • MAE 4301-005 SPEC TOPICS MECH & AERO ENGR
        (Topic: Intro to Alt. Energy Systems | Course Id: 103659)
        Fall - Regular Academic Session - 2010
      • ME 5390-001 SPEC TOPICS MECH ENGR
        (Topic: Intro to Alt. Energy Systems | Course Id: 103456)
        Fall - Regular Academic Session - 2010
      • ME 5698-035 THESIS
        (Course Id: 103461)
        Fall - Regular Academic Session - 2010
      • ME 6697-035 RESEARCH
        (Course Id: 103489)
        Summer - Eleven Week - 2010
      • MAE 3318-001 KINEMATICS & DYNAMICS MACHINES
        (Course Id: 103639)
        Spring - Regular Academic Session - 2010
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Spring - Regular Academic Session - 2010
      • ME 6697-035 RESEARCH
        (Course Id: 103489)
        Spring - Regular Academic Session - 2010
      • ME 6397-035 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2009
      • MAE 4301-005 SPEC TOPICS MECH & AEROSP ENGR
        (Topic: Intro to Alternative Enrgy Sys | Course Id: 103659)
        Fall - Regular Academic Session - 2009
      • ME 5390-003 SPEC TOPICS MECH ENGR
        (Topic: Intro to Alternative Enrgy Sys | Course Id: 103456)
        Fall - Regular Academic Session - 2009

Service to the University

    • Sept 2017 to  Present Committee Member
      Space Committee
    • Feb 2013 to  Present Committee Member
      MAE Graduate Curriculum Committee, UT-Arlington
    • Jan 2008 to  Present Committee Member
      MECOGS, UT-Arlington
    • Jan Unknown to  Present Committee Member
      MAE: Discipline of Thermal Science and Energy Systems, UT-Arlington
    • Jan Unknown to  Present Committee Member
      MAE: Disciplines of Design, Manufacturing and Multidisciplinary Optimization, UT-Arlington
    • Jan 2008 to  2008 Committee Member
      MAE Seminar committee, UT-Arlington
    • Jan 2007 to  2007 Faculty Advisor
      Undergraduate LSAMP program
    • Jan 2006 to  2007 Committee Member
      MEEN Lab committee, Texas A&M University
    • Jan 2006 to  2007 Faculty Mentor
      Pathway to Doctorate Assistantship
    • Jan 2005 to  2007 Committee Member
      Academic advisory committee for annual turbomachinery symposium
    • Jan 2004 to  2007 Committee Member
      Advisory council member for formula SAE, Texas A&M University
    • Jan 2004 to  2007 Committee Member
      MEEN PhD Qualifying Exam Committee, System & Control Division, Texas A&M University
    • Jan 2004 to  2006 Committee Member
      MEEN Safety Committee, Texas A&M University

Service to the Profession

    • Jan 2015 to  Present
      Editor, Associate Editor
      ASME Journal of Tribology
    • Feb 2020 to  Jan 2021
      Editorial Review Board Member (Seoul, South Korea)
      Korean Tribology Society
    • Jan 2019 to  Dec 2019
      Session Chair
      Turbo Expo 2019, Structures & Dynamics: Bearing & Seal Dynamics, Gas Bearing I
    • Jan 2018 to  Dec 2018
      Session Chair
      Turbo Expo 2018, Structures & Dynamics: Bearing & Seal Dynamics, Gas Bearing II
    • Jan 2016 to  2017
      Committee Chair
      STLE Conference Planning Committee, Fluid Film Bearing
    • Jan 2017 to  Dec 2017
      Session Chair
      Turbo Expo 2017, Structures & Dynamics: Bearing & Seal Dynamics, Gas Bearing II
    • Jan 2015 to  2016
      Officer, Secretary
      STLE Conference Planning Committee, Fluid Film Bearing
    • Jan 2015 to  2016
      Vice-Chair
      STLE Conference Planning Committee, Fluid Film Bearing
    • Jan 2016 to  Dec 2016
      Session Chair
      Turbo Expo 2016, Structures & Dynamics: Bearing & Seal Dynamics, Gas Bearing II
    • Apr 2016 to  May 2016
      Reviewer, Grant Proposal
      ARPA-E 1kW CHP GENSET Expert panel review
    • Jan 2015 to  2015
      Session Chair
      Turbo Expo 2015, Structures & Dynamics: Bearing & Seal Dynamics, Track 31-1 Gas Bearing I
    • Jan 2014 to  2015
      Paper Solicitation Chair
      STLE Conference Planning Committee, Fluid Film Bearing
    • Jan 2014 to  2015
      Track Chair in Macro Scale
      STLE Tribology Frontier Conference Planning Committee
    • Jan 2014 to  2014
      Session Chair
      Turbo Expo 2014, Structures & Dynamics: Gas Bearings II – Modeling and Validation
    • Jan 2013 to  2014
      Vice Paper Solicitation Chair
      STLE Conference Planning Committee, Fluid Film Bearing
    • Jan 2006 to  Nov 2014
      Reviewer, Journal Article
      Elsevier Tribology International
    • Jan 2013 to  2013
      Session Chair
      Turbo Expo 2013, Structures & Dynamics: Gas Bearings I – Modeling and Validation
    • Jan 2009 to  2013
      Reviewer, Journal Article
      Turbo Expo
    • Apr 2013 to  Oct 2013
      Reviewer, Journal Article
      ASME Journal of Engineering for Gas Turbines and Power
    • July 2004 to  Oct 2013
      Reviewer, Journal Article
      ASME Journal of Tribology
      July 04 (1), Nov 04 (1), May 05 (2), April 06 (1), July 06 (2), Nov 06 (2), Dec 06 (2), Jan 07 (1), Feb 07 (1), April 07 (1), June 07 (2), July 07 (2), Sep 07 (2), Dec 07 (2), Feb 08 (2), Mar 08 (2), May 08 (1), July 08 (2), Dec 08 (1), Feb 09 (1), May 09 (1), July 09 (2), Jan 10 (1), Dec 10 (2), Jan 11 (1), July 11 (1), Jan 12 (1), Feb 12 (1), May 12 (1), May 12 (1), Jul 12 (1), Sep 12 (1), Nov 12 (2), Dec 12 (1), Jan 13(2), April 13(2), Oct 13(1)
    • May 2013 to  May 2013
      Reviewer, Journal Article
      Elsevier International Journal of Hydrogen
    • Jan 2005 to  Feb 2013
      Proposal/paper review
      STLE Tribology Transaction
      Jan 05 (1) Dec 07 (1), Sep 08 (1), Dec 08 (1), Jan 09(1), March 09 (1), July 09 (1), Nov 09 (1), May 10 (1), June 10 (1), Aug 10(2), Nov 10(2) ,March 11(1), Feb 13 (3)
    • Jan 2013 to  Jan 2013
      Reviewer, Journal Article
      Communications in Nonlinear Science and Numerical Simulation
    • Dec 2012 to  Dec 2012
      Reviewer, Journal Article
      Journal of Mechanical Science and Technology
    • Jan 2012 to  2012
      Track Chair in Fluid Film Bearing
      IJTC Conference Planning Committee
    • Jan 2012 to  2012
      Session Chair
      Turbo Expo 2012, Structures & Dynamics: Gas Bearings I – Modeling and Validation
    • June 2006 to  Dec 2012
      Reviewer, Journal Article
      IMECH Journal of Engineering Tribology
    • Apr 2012 to  Apr 2012
      Editorial Review Board Member
      ISRN Tribology
    • Apr 2011 to  Mar 2012
      Guest Associate Editor
      ASME Journal of Tribology
    • Jan 2011 to  2011
      Session co-chair
      International Joint Tribology Conference 2011, Fluid film bearing I
    • Jan 2011 to  2011
      Session Chair
      Turbo Expo 2011, Structures & Dynamics: Bearing & Seal Dynamics, Track 25-3 Bearings III - Foil Bearings
    • Jan 2008 to  2011
      Co-editor for gas/vapor lubrication
      Springer Encyclopedia of Tribology
    • Apr 2007 to  July 2011
      Reviewer, Journal Article
      IOP Journal of Micromechanics and Microengineering
    • Apr 2011 to  Apr 2011
      Reviewer, Journal Article
      Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science
    • Feb 2008 to  Dec 2010
      Reviewer, Journal Article
      ASME Journal of Vibration and Acoustics
    • Jan 2009 to  2009
      Session Chair
      Turbo Expo 2009, Structures & Dynamics: Rotordynamics and Magnetic Bearings
      6 papers
    • Feb 2009 to  Feb 2009
      Reviewer, Journal Article
      Tribology Letters
    • Jan 2008 to  Dec 2008
      Reviewer, Journal Article
      ASME Journal of Manufacturing Science and Engineering
    • Jan 2008 to  2008
      Session Chair
      STLE 2008, Fluid film bearing
    • Jan 2008 to  2008
      Session Chair
      Turbo Expo 2008, Structures & Dynamics: Rotordynamics and Magnetic Bearings
    • Jan 2008 to  July 2008
      Reviewer, Journal Article
      ASME Journal of Journal of Dynamic Systems, Measurement and Control
    • Jan 2008 to  Jan 2008
      Reviewer, Grant Proposal
      2008 SAE International Powertrains, Fuels and Lubricants Congress
    • Jan 2008 to  Jan 2008
      Review panel
      NSF CMII
    • Dec 2007 to  Dec 2007
      Reviewer, Journal Article
      IOP Journal of Physics D: Applied Physics
    • Jan 2007 to  2007
      Session Chair
      IJTC 2007, Tribomaterials-I, Hydrodynamic lubrication and fluid film bearings-II,IV
    • Jan 2006 to  2006
      Session Chair
      IMECE 2006, TRIB-4 Tribomaterials

Service to the Community

Service to the Community

    • Jan 2009 to  2011
      Role Not Specified
      Annual Engineering Display, UTA
    • Jan 2006 to  2006
      Advisor
      Undergraduate Summer Research Program
    • Oct 2005 to  Oct 2005
      Role Not Specified
      Discover Engineering Conference for K-12 students, parents, and teachers