avatar

Endel Iarve

[Endel Iarve]

Professor, Mechanical and Aerospace Engineering
Last Updated: September 29, 2020
about me

Biography

Biography

Endel Iarve has joined the newly established Institute of Predictive Performance Methodology at University of Texas at Arlington. His research focuses on discrete damage modeling methodologies for laminated composites under a broad range of loading conditions, including compression and fatigue. He also focuses on integrated computational materials science and engineering which brings together manufacturing and performance aspects of advanced composite materials. Among his achievements, Iarve was awarded the Exceptional Performance Award and the Wohllenben/Hochwalt Professional awards from UDRI. Iarve also works in collaboration with the NASA Langly Research Center and the Skolkovo Institute of Technology in Moscow. He has been a speaker and panel participant at numerous national and international workshops and universities including UTA, SAMPE, the Conference on Composites Testing and Model Identification, the Conference of Advances in Multiscale Modeling of Composite Materials Systems and Components, the Strength and Prediction of Composite Bolted Joints and the Advisory Group for Aerospace Research & Development Structures and Materials Panel. Iarve received his Ph.D. in mechanical engineering at St. Petersburg University in Russia. He received his M.S. and B.S. at Latvian State University, Latvia. Iarve’s recent position was as a professor for the School of Engineering where he also held the title of distinguished research engineer and group leader for Advanced Composites-Analytics at the University of Dayton Research Institute (UDRI).

Education

Education

    • 1989 PhD in Mechanical Engineering
      St. Petersburg University, St. Petersburg, Russia, 1989
    • 1983 BS in Physics
      Latvian State University, Riga, Latvia , 1983
    • 1983 MS in Physics
      Latvian State University, Riga, Latvia , 1983

Appointments

Appointments

    • Dec 2013 to Dec 2015 Professor
      School of Engineering, The University of Dayton
      Dual non-tenured faculty appointment. Duties include cooperative curriculum and research development activities with the Skolkovo Institute of Technology, Moscow, Russia.
    • Oct 2011 to Oct 2015 Group Leader
      University of Dayton Research Institute (UDRI)
      ACA group consists of four PhD, one MS and BS level researchers and one MS graduate student. ACA research encompasses characterization and evaluation of reinforcing fibers and preforms of different fiber architectures, matrix resins, and composites; experimental and analytical mechanics of composites and development of novel computational techniques and tools. New areas include high-temperature composites and ceramics and their durability in extreme environments; Integrated Computational Materials Science and Engineering (ICMSE) with emphases on processing science and composites performance linkage.
    • May 2000 to May 2015 Distinguished Research Engineer
      UDRI
      The primary duties involve identifying research opportunities in the broad area of advanced composite materials and their applications as well as performing advanced research and development in these areas. The research was directed towards basic understanding of deformation and failure mechanisms of current and emerging composites as well as design recommendations and allowables selection process. New methodology of Discrete Damage Modeling in laminated composites has been developed and found support and application outside the AFRL, namely NASA, NAVAIR and industrial companies have become sponsors for this advanced methodology.
    • May 1995 to May 2000 Senior Research Engineer
      UDRI
      Developed numerical and analytical techniques for three-dimensional stress analysis in multilayered orthotropic media based on unconventional displacement approximation techniques such as B-spline approximation and its combination with asymptotic solutions. Further development and application of these techniques formed a cornerstone of a unique area of expertise and led to a formal alliance between the Air Force Research Laboratory, major airframers and aircraft engine manufacturers and UDRI. Seven technical workshops were held on annual basis to facilitate the technology transfer process. An editorial article “Recent Advances in Bolted Composite Joint Strength Prediction,” appeared in The AMTIAC Newsletter, 2000, reviewing milestones of this program.
    • Apr 1991 to Apr 1995 Research Scientist
      AdTech Systems Research Inc
      Served as a principal investigator on the following research projects: Spline Variational Elastic Laminate Technique (SVELT) for three-dimensional analysis in composite bolted joints and progressive damage modeling: stress analysis in composite plates with preformed holes: spline approximation-based postprocessing program to recover interlaminar stresses from a nonlinear finite element solution (DYNA3D) in composite fan blades subjected to bird strike; and transverse wave propagation in composite plates under high velocity impact
    • June 1989 to Mar 1991 Engineer-Designer
      Engineering and Technology Center of the Latvian Academy of Sciences
    • Apr 1983 to May 1989 Assistant and Associate Research Scientist
      Institute of Physics, Latvian Academy of Sciences
      Prior to arriving to the United States, I conducted research in the area of thin-film adhesion, viscoelastic composite modeling, and the impact response of composite materials.

Memberships

    • Jan Unknown to Present American Institute of Aeronautics and Astronautics
      Member
    • Jan Unknown to Present American Society for Composites
      Member
    • Jan Unknown to Present American Society of Mechanical Engineers
      member
    • Jan Unknown to Present Fastening and Joining Committee
      Chairperson

Awards and Honors

    • Dec  2014 Exceptional Performance Award sponsored by UDRI
    • Dec  2007 Wohlleben/Hochwalt Professional Award sponsored by UDRI
    • Jan  2006 Wohlleben/Hochwalt Professional Award sponsored by UDRI
    • Dec  1999 Wohlleben/Hochwalt Professional Research Certificate of Merit sponsored by UDRI
    • Dec  1998 Wohlleben/Hochwalt Professional Research Certificate of Merit sponsored by UDRI
    • Dec  1983 Graduate Research Award of the Latvian Academy of Sciences sponsored by Latvian Academy of Sciences

Support & Funding

Support & Funding

This data is entered manually by the author of the profile and may duplicate data in the Sponsored Projects section.
    • May 2019 to May 2022 Modeling for Affordable, Sustainable Composites (MASC) sponsored by  -  $2300000
      (Funded)
    • Sept 2019 to Sept 2021 OMC Process-to-Performance Evaluation, Research, and Analysis (OPPERA) sponsored by  -  $150000
      Endel Iarve (Funded)
    • Sept 2019 to Mar 2021 Development of Fatigue Modeling Capability in BSAM sponsored by  -  $50000
      Endel Iarve (Funded)
    • July 2019 to June 2020 Discrete Damage Modeling in Structural Composites on Distributed Memory High Performance Computers. sponsored by  -  $198150
      Endel Iarve (Funded)
    • Jan 2018 to July 2020 Advanced Material Characterization & Structural Certification sponsored by  -  $988000
      (Funded)
    • Nov 2017 to Jan 2020 Quantification of Aging from Long-term Exposure sponsored by  -  $333673
      Endel Iarve (Funded)
    • July 2017 to July 2019 Post-Buckling Simulation of Laminated Composites by Using Discrete Damage Modeling sponsored by  -  $300000
      Endel Iarve (Funded)
    • May 2017 to May 2019 Advanced Inspection and Analysis of Common Feature Test Component for Composite Airframe Life Extension (CALE) Program sponsored by  -  $0
      (Funded)
    • Dec 2016 to May 2019 Advanced Inspection and Analysis of Common Feature Test Component for Composite Airframe Life Extension (CALE) Program sponsored by  -  $600000
      (Funded)
    • Mar 2016 to Mar 2019 DEVELOPMENT OF FATIGUE LIFE PREDICTION OF ROTOR SPARS BY USING DISCRETE DAMAGE MODELING sponsored by  -  $1047436
      Endel Iarve (Funded)
    • Feb 2016 to Apr 2017 Data Requirements for Progressive Damage Analysis (PDA) of Composite Structures sponsored by  -  $265000
      (Funded)

Publications


      2013
      • Book
        Mathematical Methods and Models in Composites
        [Mantič, Vladislav]. "World Scientific".

      2002
      • Book
        Applied Mechanics: Progress and Applications : Proceedings of the Third Australasian Congress on Applied Mechanics : Sydney, Australia, 20-22 February 2002
        [Zhang, L.C.]. "World Scientific".
      • Book
        Applied Mechanics: Progress and Applications : Proceedings of the Third Australasian Congress on Applied Mechanics : Sydney, Australia, 20-22 February 2002
        [Zhang, L.C.]. "World Scientific".

      2015
      • Book Chapter
        Tensile Failure of Composite Scarf Repair
        [Iarve, Endel, Breitzman, T]. 707-730.

      2012
      2002
      • Book Chapter
        STRAIN MEASUREMENT AND PREDICTION IN A COMPOSITE DOUBLE-LAP SHEAR BONDED JOINT
        Applied Mechanics: Progress and Applications
        [MOLLENHAUER, DAVIDH, SCHOEPPNER, GREGORYA, Iarve, Endel]. 461--466. "World Scientific".
      • Book Chapter
        TRANSVERSE DAMAGE INDUCED STRESS REDISTRIBUTION IN OPEN HOLE COMPOSITE LAMINATES
        Applied Mechanics: Progress and Applications
        [IARVE, EV, MOLLENHAUER, D, KIM, R]. 467--472. "World Scientific".

      2018
      • Journal Article
        Discrete Damage Modeling of Static Bearing Failure in Laminated Composites
        [Iarve, EndelV, Hoos, KevinH, Makeev, AndrewV, Nikishkov, YuriG, ]. Composites. Part A, Applied Science and Manufacturing. 108, 30-40.

      In Process
      • Journal Article
        Experimental and numerical examination of a sharp composite notch with a novel chevron feature to improve damage tolerance
        [Harman, Alex, Mollenhauer, David, Rapkin, Daniel, Iarve, Endel]. Composites. Part A, Applied Science and Manufacturing. Submitted.
      • Journal Article
        Experimental and Theoretical Evaluation of Stiffness Properties of Fused Deposition Modeling Parts
        Proceedings 30th Technical Conference
        [Iarve, Endel, Osborn, T, Zhou, E, Gerzeski, R, Mollenhauer, D, Tandon, GP, Whitney, T]. Published.
      • Journal Article
        Simulation of Discrete Damage Evolution in Laminated Composite Compact Tension Specimens
        Proceeding: 52th AIAA/ SDM
        [Iarve, Endel, Mollenhauer, DH, Puttanarat, S, Hoos, K, Hallett, S]. Published.
      • Journal Article
        Application of Discrete Damage Modeling to Laminated Composite Overheight Compact Tension Specimens
        Proceeding: 51th AIAA SDM
        [Iarve, Endel, Mollenhauer, DH, Putthanarat, S, Hallett, SR, Li, X]. Published.
      • Journal Article
        Mechanism‐Based Direct Simulation of Tensile Failure in Composite Laminates
        Proceeding: 51th AIAA SDM
        [Iarve, Endel, Mollenhauer, D, Gurvich, M]. Published.
      • Journal Article
        Detailed Morphology Modeling and Residual Stress Evaluation in Tri-Axial Braided Composites
        50th AIAA/SDM
        [Iarve, Endel, Zhou, E, Brietzman, T, Mollenhauer, DH]. Published.
      • Journal Article
        Explicit Modeling Of Damage Initiation And Evolution In Open-Hole Composites
        Proceedings 10-th International Conference on Fracture
        [Iarve, Endel, Mollenhauer, D, Kim, R]. Published.
      • Journal Article
        3D Spline Variational Analysis of a Composite Double-Lap Shear Joint
        Proceedings SAMPE
        [Iarve, Endel, Schoeppner , GA, Mollenhauer, D]. Published.
      • Journal Article
        Interlaminar Stress Analysis in Compression Loaded Composites Containing Holes
        Proceedings of the 8th Annual Technical Conference of the American Society for Composites
        [Iarve, Endel]. 1025-11034. Published.
      • Journal Article
        Spline Approximation Based Methods for Thermoelastic problems of Composite Structures
        Proceedings USSR/USA 2nd Symposium on Mechanics of Composite Materials
        [Iarve, Endel, Soni, SR]. Published.

      2017
      2013
      2012
      2011
      2009
      2007
      • Journal Article
        Three-dimensional Stress Analysis and Weibull Statistics Based Strength Prediction in Composite Laminates with Open Holes
        [Iarve, Endel, Mollenhauer, D, Kim, R]. 38, 174-185.

      2006
      2005
      2004
      • Journal Article
        Prediction and Measurement of Residual Strains in a Composite Bonded Joint
        Mechanics of Composite Materials
        [Iarve, Endel]. 40(2), 119-134.
      • Journal Article
        Singular Stress Fields Near Contact Boundaries in a Composite Bolted Joint
        Int. J. Solids Structures
        [Iarve, Endel, Whitney, T, Brockman, R]. 41, 1893-1909.
      • Journal Article
        Three-Dimensional Stress Analysis of Textile Woven Composites: Part I. Numerical Analysis
        Int. J. Solids Structures
        [Iarve, Endel, Sihn, S, Roy, A]. 41, 1377-1393.
      • Journal Article
        Three-Dimensional Stress Analysis of Textile Woven Composites: Part II. Asymptotic Analysis
        Int. J. Solids Structures
        [Iarve, Endel, Sihn, S, Roy, A]. 41, 1395-1410.

      2003
      • Journal Article
        Asymptotic Analysis of Laminated Composites with Countersunk open- and fastened holes
        Composites Science and Technology
        [Iarve, Endel, Sihn, S, Roy, A]. 66, 2479-2490.

      2002
      • Journal Article
        Full-Field Singular Stresses in Composite Laminates Weakened by Cylindrical Cavity: Theory and Experiment
        Advanced Composite Materials
        [Iarve, Endel, Mollenhauer, D]. 11(1), 21-29.

      2001
      • Journal Article
        Singular Full-Field Stresses in Composite Laminates with Open Holes
        Int. J. Solids Structures
        [Iarve, Endel, Pagano, NJ]. 38(1), 1-28.
      • Journal Article
        Stress-Analysis and In-situ Fracture Observation of Wear Protective Multilayer Coatings in Contact Loading
        Surface Science and Technology
        [Iarve, Endel, Voevodin, AA, Ragland, W, Zabinski, JS, Donaldson]. 148, 38-45.

      2000
      • Journal Article
        Hole Size Effect on the Damage Progression in Composite Laminate: Part I Damage Initiation
        Proceedings, SEM Annual Meeting
        [Iarve, Endel, Kim, RY].
      • Journal Article
        Asymptotically Exact Stresses in Laminates with Rigid Fastener
        J. Composite Science and Technology
        [Iarve, Endel]. 60, 2365-2374.
      • Journal Article
        Three-Dimensional Stress Analysis and Failure Prediction in Filled Hole Laminates
        Theory and Practice
        [Iarve, Endel]. 132-139.

      1997
      • Journal Article
        Three-dimensional Stress Analysis in Laminated Composites with Fasteners Based on the B-Spline Approximation
        Composites Part A
        [Iarve, Endel]. 28a, 559-571.

      1996
      • Journal Article
        Spline Variational Three-Dimensional Stress Analysis of Laminated Composite Plates With Open Holes
        Int. J. Solids & Structures
        [Iarve, Endel]. 44(14), 2095-2118.

      1994
      • Journal Article
        On the Accuracy of Interlaminar Stress Calculation in the Vicinity of an Open Hole in Composite by Use of the Spline Variational Technique
        [Iarve, E.].
        https://www.osti.gov/scitech/biblio/89860
      • Journal Article
        On the Accuracy of Interlaminar Stress Calculation in the Vicinity of an Open Hole in Composite by Use of the Spline Variational Technique
        [Iarve, E.].
        https://www.osti.gov/scitech/biblio/89860

      1991
      • Journal Article
        The Effect of Material Inhomogeneity in Composites Laminates under impact Loading
        Proceedings of the 6th Annual Technical Conference of the American Society for Composites
        [Iarve, Endel, Hag, IU, Soni, SR]. 29-30.

      1990
      1989
      • Journal Article
        Numerical Analysis of Impact Deformation of Laminated Composite Plates
        Mechanics of Composite Materials
        [Iarve, Endel, Bogdanovich, AE].(5), 804-820.
      • Journal Article
        The influence of the Laminate and Structural parameters on Applicability of Engineering Models for Dynamic Bending Problems
        Mechanics of Composite Materials
        [Iarve, Endel].(1), 111-118.

      1988
      • Journal Article
        Calculation of Stresses in Laminated Materials under Transversal Bending
        Proceedings of the 2nd Int. Symposium on Brittle Matrix Composites
        [Iarve, Endel, Bogdanovich, AE]. 17.
      • Journal Article
        Numerical Solution of the Two-dimensional Transient Deformation Problem for a Laminated Media
        Mechanics of Composite Materials
        [Iarve, Endel, Bogdanovich, AE].(1), 36-44.

      1987
      • Journal Article
        Analysis of Multilayered Orthotropic Plate under Rigid Body Transverse Impact
        Proceedings XI Conference of Institute of Machinery
        [Iarve, Endel].
      • Journal Article
        Numerical Analysis of the Deformation of a Piece-vice Homogeneous Viscoelastic Orthotropic Plate under Transverse Impact
        In Book: Dynamics of Inhomogeneous Media and Interaction of Waves with Structural Elements
        [Iarve, Endel, Bogdanovich, AE]. 10-12.
      • Journal Article
        Relationship Between The Interaction Energy and Adhesion Strength at Direct Pull of Metallic Film from Dielectric Substrate
        Surface, Physics, Chemistry, Mechanics
        [Iarve, Endel, Varchenya, SA, Simanovsky, AA].(6), 134-137.

      1986
      • Journal Article
        A Method for Solution of Axial Dynamic Bending Problems in Thin Wall Viscoelastic Structural Elements
        Mechanics of Composite Materials
        [Iarve, Endel, Bogdanovich, AE].(6), 848-854.

      1985
      • Journal Article
        Stress Prediction Methodology in Viscoelastic Layered Media under Dynamic Bending
        Modeling of Physical Processes in Continuous Medium
        [Iarve, Endel]. 111-121.

      1984
      • Journal Article
        Stress State in Multilayered Composites in Bending
        Mechanics of Composite Materials
        [Iarve, Endel]. 131.

      2017
      • Conference Proceeding
        Discrete Damage Modeling of Delamination Migration in Clamped Tapered Beam Laminated Beam Specimens,
        [Adluru, HariK, Hoos, Kevin, Iarve, Endel]. ????. "Proceedings ASC 32nd Technical Conference, Oct 23-125 West Lafayette, IN".

      2016
      • Conference Proceeding
        The effect of high temperature on the mechanical performance of novel high Tg polymide-based carbon fibre-reinforced laminates
        [Tsampas, Spyros, Fernberg, Patrik, Joffe, Roberts]. "European Conference on Composite Materials".
        http://www.diva-portal.org/smash/record.jsf?pid=diva2:1011573

      In Process
      • Conference Proceeding
        Experimental and Theoretical Investigation of Discrete Damage and Residual Strength Prediction in Fatigue-Loaded CFRP Specimens
        Proceedings 30th Technical Conference
        [Iarve, Endel, Hoos, KH, Braginsky, M, Zhou, E, Mollenhauer, DH]. Published.
      • Conference Proceeding
        Independent Mesh Model for Composites with Complex Fiber Architecture
        Proceeding 49th AIAA/SDM
        [Iarve, Endel]. Published.
      • Conference Proceeding
        Micro-geometric Modeling of Textile Preforms with Vacuum Bag Compression: An Application of Multi-chain Digital Element Technique
        Proceedings: 49th AIAA/SDM
        [Iarve, Endel]. Published.
      • Conference Proceeding
        Analysis and Measurement of Scarf-Lap and Step-Lap Joint Repair in Composite Laminates
        ”, Proceedings:16th International Conference on Composite Materials
        [Iarve, Endel, Mollenhauer, DH, Fradrickson, B, Schoeppner, G, Palazatto, AN]. Published.
      • Conference Proceeding
        Tensile Failure Prediction and Measurement in Composite Scarf Repair
        Proceedings: 16th International Conference on Composite Materials
        [Iarve, Endel, Breitzman, TD, Cook, B, Schoeppner, G, Mollenhauer, DH]. Published.
      • Conference Proceeding
        Analytical/Experimental Examination of Cracks in a 00 Composite Laminate Containing a Central Hole
        Proceedings of the 16th Annual Technical Conference of the American Society for Composites
        [Iarve, Endel, Kim, R]. Published.
      • Conference Proceeding
        Three-dimensional stress analysis in bearing loaded composite laminates including clamp up effects
        Proceedings of the 15th Annual Technical Conference of the American Society for Composites
        [Iarve, Endel, Whitney, T]. Published.
      • Conference Proceeding
        Three-dimensional Stress Analyses in Laminated Composites with a Hole in Presence of Discrete Damage
        ASME Winter Meeting
        [Iarve, Endel, Kim, R]. Published.
      • Conference Proceeding
        Three-dimensional Stress Analysis in Composite Laminates with Elastic Fastener and Washer Clamp-up
        Proceedings of the 14th Annual Technical Conference of the American Society for Composites
        [Iarve, Endel, Whitney, T]. Published.

      2002
      • Conference Proceeding
        Residual Stress Prediction and Measurement in Composite Bonded Joint Adhesive
        Proceedings of the 3-rd Australasian Congress on Applied mechanics
        [Iarve, Endel, , , ]. 461-466.

      1998
      • Conference Proceeding
        Combined Asymptotic avd B-Spline Based 3-D Analysis of Rigid Fastener Hole Composites
        Proceedings ICCE/5
        [Iarve, Endel].

      1997
      • Conference Proceeding
        Combined asymptotic and B-spline based approximation for 3-D analysis of composite laminates with holes
        [Iarve, Endel]. Reston: "American Institute of Aeronautics and Astronautics".
        https://arc.aiaa.org/doi/abs/10.2514/6.1997-1118

      1996
      • Conference Proceeding
        Three-Dimensional Asymptotic and B-Spline Based Numerical Analysis of Composite Laminates with Fastener Holes
        Proceedings of the 11th Annual Technical Conference of the American Society for Composites
        [Iarve, Endel]. 1086-1095.

      1995
      • Conference Proceeding
        Stress Analysis in Composites with Fastener Holes
        Proceedings of the 10th Annual Technical Conference of the American Society for Composites
        [Iarve, Endel]. 408-419.

Presentations

    • June  2016
      Iarve, Endel, "Computational Analysis for Durability of Laminated Composite Structures, Keynote lecture at DURACOSYS 2016 Conference". (June 1, 2016).
    • April  2016
      Iarve, Endel, "Discrete damage modeling in laminated composites under static and fatigue loading,". (April 1, 2016).
    • April  2015
      Iarve, Endel, "Laminated Composite Materials: Modeling and Testing, Plenary lecture at 7th International Conference om Composites Testing and Model Identification". (April 1, 2015).
    • October  2013
      Iarve, Endel, "Journey to Virtual Testing - Explicit Modeling of Cracking and Delamination Networks in Composites". (October 1, 2013).
    • May  2013
      Iarve, Endel, "Composites (ICM2) ICMSE FEP: In-House Efforts Overview". (May 7, 2013).
    • September  2005
      Iarve, EndelV. (Presenter), "Strength Prediction in Composites with Stress Concentrations: Classical Weibull and Critical Failure Volume Methods with Micromechanical Considerations", Monterey, CA. (September , 2005).

Students Supervised

    • Present
      Graduate Supervised Research
      Michael Swinderman,
      , A Regularized Extended Finite Element Method for Modeling the Coupled Cracking and Delamination of Composite Materials
    • Present
      Graduate Supervised Research
      Thomas Whitney,
      Asymptotic Analysis of Singular Stress Fields near Contact Boundaries in Anisotropic Elastic Media

Courses

      • AE 5310-001 FINITE ELEMENT METHODS
        (Course Id: 101949)
        Fall - Regular Academic Session - 2020 Download Syllabus
      • AE 5310-002 FINITE ELEMENT METHODS
        (Course Id: 101949)
        Fall - Regular Academic Session - 2020 Download Syllabus
      • AE 5310-003 FINITE ELEMENT METHODS
        (Course Id: 101949)
        Fall - Regular Academic Session - 2020 Download Syllabus
      • AE 5310-900 FINITE ELEMENT METHODS
        (Course Id: 101949)
        Fall - Regular Academic Session - 2020
      • ME 5310-001 FINITE ELEMENT METHODS
        (Course Id: 103404)
        Fall - Regular Academic Session - 2020 Download Syllabus
      • ME 5310-002 FINITE ELEMENT METHODS
        (Course Id: 103404)
        Fall - Regular Academic Session - 2020 Download Syllabus
      • ME 5310-003 FINITE ELEMENT METHODS
        (Course Id: 103404)
        Fall - Regular Academic Session - 2020 Download Syllabus
      • ME 5310-900 FINITE ELEMENT METHODS
        (Course Id: 103404)
        Fall - Regular Academic Session - 2020
      • ME 6299-008 DISSERTATION
        (Course Id: 111984)
        Spring - Regular Academic Session - 2020
      • ME 7399-008 DOCTORAL DEGREE COMPLETION
        (Course Id: 111647)
        Fall - Regular Academic Session - 2019
      • AE 7399-008 DOCTORAL DEGREE COMPLETION
        (Course Id: 111647)
        Summer - Eleven Week - 2019
      • ME 6196-008 MECHANICAL ENGR INTERNSHIP
        (Course Id: 110864)
        Summer - Eleven Week - 2019
      • AE 6699-008 DISSERTATION
        (Course Id: 101999)
        Spring - Regular Academic Session - 2019
      • ME 6699-008 DISSERTATION
        (Course Id: 103490)
        Spring - Regular Academic Session - 2019
      • AE 5310-004 FINITE ELEMENT METHODS
        (Course Id: 101949)
        Fall - Regular Academic Session - 2018
      • ME 5310-004 FINITE ELEMENT METHODS
        (Course Id: 103404)
        Fall - Regular Academic Session - 2018
      • ME 5310-005 FINITE ELEMENT METHODS
        (Course Id: 103404)
        Fall - Regular Academic Session - 2018
      • ME 6397-008 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2018
      • ME 6697-008 RESEARCH
        (Course Id: 103489)
        Fall - Regular Academic Session - 2018
      • AE 6397-008 RESEARCH AEROSPACE ENGINEERING
        (Course Id: 101994)
        Fall - Regular Academic Session - 2018
      • AE 6697-008 RESEARCH IN AEROSPACE ENGRG
        (Course Id: 101998)
        Fall - Regular Academic Session - 2018
      • ME 5310-001 FINITE ELEMENT METHODS
        (Course Id: 103404)
        Spring - Regular Academic Session - 2018 Download Syllabus
      • ME 5310-002 FINITE ELEMENT METHODS
        (Course Id: 103404)
        Spring - Regular Academic Session - 2018
      • ME 6697-008 RESEARCH
        (Course Id: 103489)
        Spring - Regular Academic Session - 2018
      • AE 6397-008 RESEARCH AEROSPACE ENGINEERING
        (Course Id: 101994)
        Spring - Regular Academic Session - 2018
      • AE 6697-008 RESEARCH IN AEROSPACE ENGRG
        (Course Id: 101998)
        Spring - Regular Academic Session - 2018
      • AE 5310-004 FINITE ELEMENT METHODS
        (Course Id: 101949)
        Fall - Regular Academic Session - 2017 Download Syllabus
      • ME 5310-004 FINITE ELEMENT METHODS
        (Course Id: 103404)
        Fall - Regular Academic Session - 2017
      • ME 5310-005 FINITE ELEMENT METHODS
        (Course Id: 103404)
        Fall - Regular Academic Session - 2017
      • ME 6397-008 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2017
      • ME 5310-001 FINITE ELEMENT METHODS
        (Course Id: 103404)
        Spring - Regular Academic Session - 2017
      • ME 6397-008 RESEARCH
        (Course Id: 103485)
        Spring - Regular Academic Session - 2017
      • ME 5310-004 FINITE ELEMENT METHODS
        (Course Id: 103404)
        Fall - Regular Academic Session - 2016
      • ME 5310-005 FINITE ELEMENT METHODS
        (Course Id: 103404)
        Fall - Regular Academic Session - 2016
      • ME 6397-008 RESEARCH
        (Course Id: 103485)
        Fall - Regular Academic Session - 2016
      • ME 5310-001 FINITE ELEMENT METHODS
        (Course Id: 103404)
        Spring - Regular Academic Session - 2016
      • ME 5310-002 FINITE ELEMENT METHODS
        (Course Id: 103404)
        Spring - Regular Academic Session - 2016

Service to the Profession

    • Mar 2018 to  Sept 2019
      Scientific Committee Member
      ECCOMAS Thematic Conference on the Mechanical Response of the Composites
      Scientific Committee Member
    • July 2018 to  July 2018
      Session Chair
      The Seventh International Conference on Fatigue of Composites
    • Sept 2017 to  July 2018
      Symposium Organizer
      13th World Congress on Computational Mechanics
    • Sept 2017 to  May 2018
      Scientific Committee Member
      Composite Testing and Model Identification International Conference
    • Oct 2017 to  Oct 2017
      Session Chair
      ASC 32nd Technical Conference, Oct 23-125 West Lafayette, IN