Skip to content. Skip to main navigation.

avatar

Erian A Armanios

Name

[Armanios, Erian A]
  • Chair, Mechanical and Aerospace Engineering

Biography

Dr. Armanios is Professor and Chair of the School of Mechanical and Aerospace Engineering, University of Texas at Arlington.  Prior to joining the University of Texas at Arlington in 2009 he was Professor in the School of Aerospace Engineering at the Georgia Institute of Technology and Director of the Georgia Space Grant Consortium.  He received his B. degree in Aeronautical Engineering in 1974 with Highest Honor and his M.S. degree in 1979 both from the University of Cairo, and his Ph.D. degree in 1985 from the Georgia Institute of Technology.  His interests include teaching and conducting research in the fields of analysis, testing and design of fixed and rotary wing composite structures.  He has published over 150 articles in refereed journals, conference proceedings and books.  He is Fellow of the American Society for Composites and the recipient of its Outstanding Research Award.  He holds five patents related to composites and implementation of active materials.  He is past Editor-in-chief of the Journal of Composites Technology and Research published by ASTM and Editor-in-chief of Key Engineering Materials, published by Trans Tech Publications.  He received, among other awards, the CETL/Amoco Junior Faculty Teaching Award, The Georgia Tech Class of 1940-W. Roane Beard Outstanding Teaching Award, the Board of Regents of the University System of Georgia Teaching Excellence Faculty Award, and the Sigma Xi and SAIC Ph.D. Thesis Advisor Awards.

Professional Preparation

    • 1985 Ph. D. in Aerospace EngineeringGeorgia Institute of Technology
    • 1979 M. S. in Aeronautical EngineeringUniversity of Cairo
    • 1974 B. in Aeronautical Engineering (Distinction with Honor Degree)University of Cairo

Appointments

    • Jan 2009 to Present Professor & Chair
      University of Texas at Arlington
    • Aug 2011 to Dec 2011 Interim Dean, College of Engineering
      University of Texas at Arlington
    • Jan 1997 to Jan 2008 Professor
      Georgia Institute of Technology, Atlanta, Georgia
    • Jan 1991 to Jan 2008 Director of Georgia NASA Space Grant Consortium
      Georgia Institute of Technology, Atlanta, Georgia
    • Jan 1991 to Jan 1997 Assoc Prof
      Georgia Institute of Technology, Atlanta, Georgia
    • Jan 1986 to Jan 1991 Assist Professor
      Georgia Institute of Technology, Atlanta, Georgia
    • Jan 1985 to Jan 1986 Research Engineer I
      Georgia Institute of Technology, Atlanta, Georgia
    • Jan 1980 to Jan 1984 Graduate Research Assistant
      Georgia Institute of Technology, Atlanta, Georgia
    • Jan 1979 to Jan 1980 Consulting Engineer
      Steel Structure Consulting Office, Cairo, Egypt
    • Jan 1979 to Jan 1980 Assistant Lecturer
      University of Cairo, Giza, Egypt
    • Jan 1974 to Jan 1979 Teaching Assistant
      University of Cairo, Giza, Egypt
    • Jan 1973 to Jan 1973 Engineer Trainee
      French National Railways (SNCF), Bischheim, Strasbourg, France

Memberships

  • Membership
    • May 2013 to Present American Society for Testing and Materials
    • May 2013 to Present American Society for Mechanical Engineers
    • May 2012 to Present University of Minnesota, Minneapolis  The University Of Minnesota - Morehouse College/Atlanta System Undergraduate Honors Program in Global Issues
    • May 2012 to Present Fort Valley Sate University
    • May 2012 to Present American Society for Composites
    • May 2012 to Present American Institute of Aeronautics and Astronautics
    • May 2012 to Present American Helicopter Society

Awards and Honors

    • May  2013 Additional Honors and Awards sponsored by Various universities and National laboratoriesFrance, USA
      Description:
      • Huazhong University of Science and Technology, Keynote Speaker, 2010 International Forum on Advanced Aerospace Composite Materials, Wuhan, China, 2010.
      • ASC, Outstanding Research Award, 2010.
      • ASC, Elected Fellow, 2006.
      • American Men and Women of Science (1998-99)
      • Who's Who in America, 52nd-63rd Edition (1998-2009).
      • Who's Who in the World, 12th-26th Editions (1995-2009).
      • Who's Who in Finance and Industry, 29th-31st Edition (1996-2001).
      • Who's Who in American Education, 5th-7th Editions (1996-1997, 2004-2005, 2006-2007).
      • Who's Who in the South and Southwest, 23rd-26th Edition (1995-2000), Millennium Edition. (2000-2001), 28th Edition (2002).
      • Who's Who in Science and Engineering, 2nd-10th Edition (1994-2008).
      • Who's Who in the South and Southeast, 23rd Edition (1993-1994).
      • Dictionary of International Biography, 23rd-25th Editions (1994-1997).
      • Five Hundred Leaders of Influence (1997).
      • Men of Achievement, 16th-17th Editions (1995-1996).
      • Intel International Science and Engineering Fair Certificate of appreciation for participating as a Special Awards Judge for NASA (2001).
      • American Society for Composites Chairperson Award, 19th Technical Conference on Composite Materials, Atlanta, Georgia, October 17-20 (2004).
      • Committee D30 on Composite Materials, Editor Award, STP 1285 Composite Materials: Fatigue and Fracture, 6th Volume (1997).
      • ASTM International, Editor-in-Chief Award, ASTM Journal of Composites Technology and Research, October (2004).
      • ASTM International Committee D30 on Composite Materials Distinguished Service Award, October (2004).
      • ASTM, Wayne W. Stinchcomb Memorial Award and lecture (2002).
      • Excellence Faculty Award, Women in Engineering Program, Georgia Tech (2002).
      • Board Of Regents of the University System of Georgia Regents' Teaching Excellence Faculty Award (2000).
      • Georgia Tech Class of 1940-W. Roane Beard Outstanding Teacher Award (1999).
      • Georgia Tech Faculty Leadership Award (1996).
      • SAIC Certificate of Award in honor of contributions, made as advisor, to the technical paper entitled: "Optimum Coupling in Thin-walled, Single-celled Composite beams" (1997).
      • SAIC Certificate of Award in honor of contributions, made as advisor, to the technical paper entitled: "Examination of Three Methods for Testing Extension-Twist Coupled Laminates," (1995).
      • ASTM Best Paper Award, Sixth Symposium on Composite Materials: Fatigue and Fracture (1995).
      • Sigma Xi Undergraduate Research Advisor Award (1999, 2001).
      • Sigma Xi Ph.D. Thesis Advisor Award for Outstanding Ph.D. Thesis in Engineering (1991, 1998).
      • Sigma Xi Junior Faculty Award (1991).
      • ASCE Outstanding Paper Award, Journal of Aerospace Engineering (1990).
      • Selected by the Student Activities Committee of AIAA as one of the most dedicated and active faculty advisors in the country, (1990).
      • CETL/Amoco Junior Faculty Teaching Excellence Award (1990).
      • SAIC Certificate of Award in honor of the contribution to the technical paper entitlted:"Fracture Behavior of a Quasi-isotropic Short-Beam Composite Specimen," (1990).
      • Georgia Tech Certificate of Appreciation for serving as a Freshman Partner in the Freshmen experience (1998-1999).
      • AIAA Atlanta Section Certificate of Appreciation (1990, 1991).    
      • ASTM Best Paper Award, Third Symposium on Composite Materials: Fatigue and Fracture (1989).
      • AIAA Outstanding Faculty Advisor Citation, Georgia Tech Student Branch (1988-1989).
      • Member of the Judging Committee for the NSTA/NASA Space Science Student Involvement Program (1988 - 1993).
      • Judge, International Science and Engineering Fair (1998, 1999).
      • AIAA Faculty Advisor Award, Region II - Southeastern United States (1988-1989).
      • Sigma Xi Award for Outstanding Ph.D. Thesis in Engineering (1985).
      • Distinction with Honor Degree, B. of Aeronautical Engineering (1974).
      • Medal of Excellence in Aeronautical Studies, University of Cairo (1973).
      • Summer Internship, French National Railways (SNCF) (1973)
      • College of Engineering Scholarship, University of Cairo (1969-1974).
    • Jan  2010 Huazhong University of Science and Technology, Keynote Speaker sponsored by
      Description:

      Wuhan, China

    • Jan  2010 ASC, Outstanding Research Award. sponsored by
    • Jan  2006 ASC, Elected Fellow. sponsored by ASC
    • Oct  2004 American Society for Composites Chairperson Award sponsored by Technical Conference on Composite Materials
      Description:

      19th Technical Conference on Composite Materials, Atlanta, Georgia, October 17-20

    • Oct  2004 ASTM International, Editor-in-Chief Award sponsored by ASTM Journal of Composites Technology and Research
      Description:

      ASTM Journal of Composites Technology and Research.

    • Oct  2004 Distinguised Service Award sponsored by ASTM International Committee D30 on Composite Materials
    • Oct  2004 ASTM International sponsored by ASTM
      Description:

      Committee on Publications Award

    • Oct  2004 ASTM International Committee D30 on Composite Materials Distinguished Service Award sponsored by ASTM
      Description:

      ASTM International Committee D30 on Composite Materials Distinguished Service Award

    • Oct  2002 ASTM, Wayne W. Stinchcomb Memorial Award and lecture (2002). sponsored by ASTM, Wayne W. Stinchcomb Memorial
    • Oct  2002 Wayne W. Stinchcomb Memorial Award sponsored by ASTM D30 Committee
      Description:

      Wayne W. Stinchcomb Memorial Award and lecture

    • May  2002 Excellence Faculty Award sponsored by Georgia Institute of Technology
      Description:

      Women in Engineering Program

    • Mar  2002 Excellence Faculty Award sponsored by Georgia Institute of Technology
      Description:

      Women in Engineering Program

    • May  2001 Sigma Xi Undergraduate Research Advisor Award sponsored by Signma Xi
      Description:

      Undergraduate Advisor Award, 1999 and 2001

    • Jan  2001 Intel International Science and Engineering Fair Certificate of appreciation sponsored by Intel International Science and Engineering Fair
      Description:

       For participating as a Special Awards Judge for NASA (2001).

    • May  2000 Regents’ Teaching Excellence Faculty sponsored by Board of Regents of the University System of Georgia
      Description:

      Board of Regents of the University System of Georgia

    • Jan  2000 Teaching Excellence Faculty Award sponsored by Board Of Regents of the University System of Georgia Regents
    • May  1999 Roane Beard Outstanding Teacher Award sponsored by Georgia Institute of Technology
      Description:

      Georgia Tech Class of 1940-W.

    • May  1999 Georgia Tech Class of 1940-W. Roane Beard Outstanding Teacher Award sponsored by Georgia Institute of Technology
      Description:

      Outstanding Teacher Award

    • May  1999 Georgia Tech Freshman Partner Award, Freshmen experience sponsored by Georgia Institute of Technology
      Description:

      Freshman Experience Award, 1998-1999

    • Jan  1999 Sigma Xi Undergraduate Research Advisor Award (1999, 2001). sponsored by Sigma Xi
    • May  1998 Sigma Xi Ph.D. Thesis Advisor Award for Outstanding Ph.D. Thesis in Engineering sponsored by Sigma Xi
      Description:

      These Advisor Award 1991 and 1998

    • Jan  1998 American Men and Women of Science (1998-99) sponsored by American Men and Women of Science
    • Jan  1998 Who's Who in America, 52nd-63rd Edition (1998-2009). sponsored by
      Description:

      52nd-63rd Edition (1998-2009).

    • Jan  1998 Georgia Tech Certificate of Appreciation (1998-1999). sponsored by Georgia Institute of Technology
      Description:

       For serving as a Freshman Partner in the Freshmen experience

    • Jan  1998 Judge, International Science and Engineering Fair (1998, 1999). sponsored by International Science and Engineering Fair
    • May  1997 SAIC Advisor Awards sponsored by SAIC
      Description:

      Advising award, 1990, 1995 and 1997

    • Jan  1997 Five Hundred Leaders of Influence (1997). sponsored by Leaders of Influence
    • Jan  1997 Committee D30 on Composite Materials, Editor Award sponsored by STP 1285 Composite Materials
      Description:

      STP 1285 Composite Materials: Fatigue and Fracture, 6th Volume (1997).

    • Jan  1997 SAIC Certificate of Award sponsored by SAIC
      Description:

      In honor of contributions, made as advisor, to the technical paper entitled: "Optimum Coupling in Thin-walled, Single-celled Composite beams" (1997).

    • Dec  1996 Georgia Tech Faculty Leadership Award sponsored by Georgia Institute of Technology
    • May  1996 Georgia Tech Faculty Leadership Award sponsored by Georgia Institute of Technology
      Description:

      Faculty Leadership

    • Jan  1996 Who's Who in Finance and Industry, 29th-31st Edition (1996-2001). sponsored by Who's Who Committee
    • Jan  1996 Who's Who in American Education, 5th-7th Editions (1996-1997, 2004-2005, 2006-2007). sponsored by Who's Who Committee
    • Jan  1995 Who's Who in the World, 12th-26th Editions (1995-2009). sponsored by Who's Who Committee
    • Jan  1995 Who's Who in the South and Southwest, 23rd-26th Edition (1995-2000), Millennium Edition. (2000-2001), 28th Edition (2002). sponsored by Who's Who Committee
    • Jan  1995 Men of Achievement, 16th-17th Editions (1995-1996). sponsored by
    • Jan  1995 SAIC Certificate of Award. sponsored by
      Description:

      In honor of contributions, made as advisor, to the technical paper entitled: "Examination of Three Methods for Testing Extension-Twist Coupled Laminates," (1995)

    • Jan  1995 ASTM Best Paper Award sponsored by ASTM
      Description:

      Best Paper Award., Sixth Symposium on Composite Materials: Fatigue and Fracture (1995).

    • Jan  1994 Who's Who in Science and Engineering, 2nd-10th Edition (1994-2008). sponsored by Who's Who Committee
    • Jan  1994 Dictionary of International Biography, 23rd-25th Editions (1994-1997). sponsored by Dictionary of International Biography
    • Jan  1993 Who's Who in the South and Southeast, 23rd Edition (1993-1994). sponsored by Who's Who Committee
    • May  1991 Sigma Xi Junior Faculty Award sponsored by Sigma Xi
      Description:

      Junior Faculty Award

    • May  1991 AIAA Atlanta Section Awards sponsored by
      Description:

      AIAA Section Award 1990 and 1991

    • Jan  1991 Sigma Xi Ph.D. Thesis Advisor Award for Outstanding Ph.D. Thesis in Engineering (1991, 1998). sponsored by Sigma Xi
    • May  1990 ASCE Outstanding Paper Award sponsored by American Society of Civil Engineers (ASCE)
      Description:

      Journal of Aerospace Engineering

    • May  1990 CETL/Amoco Junior Faculty Teaching Excellence Award sponsored by CETL/Amoco
      Description:

      Junior Faculty Teaching Excellence Award

    • Jan  1990 Most dedicated and active faculty advisors in the country. sponsored by Student Activities Committee of AIAA
    • Jan  1990 SAIC Certificate of Award . sponsored by
      Description:

      In honor of the contribution to the technical paper entitlted:"Fracture Behavior of a Quasi-isotropic Short-Beam Composite Specimen," (1990)

    • Jan  1990 AIAA Atlanta Section Certificate of Appreciation (1990, 1991). sponsored by AIAA
    • May  1989 AIAA Faculty Advisor Award sponsored by AIAA
      Description:

      Faculty Advisor Award, 1998-1989

    • Jan  1989 ASTM Best Paper Award sponsored by ASTM
      Description:

       Third Symposium on Composite Materials: Fatigue and Fracture

    • Jan  1988 AIAA Outstanding Faculty Advisor Citation (1988-1989). sponsored by Georgia Tech Student Branch
    • Jan  1988 Member of the Judging Committee (1988 - 1993). sponsored by NSTA/NASA Space Science
      Description:

       for the NSTA/NASA Space Science Student Involvement Program

    • Jan  1988 AIAA Faculty Advisor Award(1988-1989). sponsored by Region II - Southeastern United States
    • May  1985 Sigma Xi Award for Outstanding Ph.D. Thesis in Engineering sponsored by
      Description:

      Outstanding Ph.D. Thesis in Engineering

    • Jan  1974 Distinction with Honor Degree, B. of Aeronautical Engineering (1974). sponsored by Georgia Institute of Technology
    • Jan  1973 Medal of Excellence in Aeronautical Studies (1973). sponsored by University of Cairo
    • Jan  1973 Summer Internship sponsored by French National Railways (SNCF)
    • Jan  1969 College of Engineering Scholarship(1969-1974). sponsored by University of Cairo

Research and Expertise

  • Areas of Expertise and Background
    Dr. Armanios' research areas include structural analysis, design and damage tolerance of advanced composites.  He has broad experience in analysis methodology ranging from classical methods to finite element, advanced optimization techniques and nondeterministic models.  His current research interests are modeling, stress analysis, testing and failure processes of elastically tailored composites, energy dissipation concepts for composites, use of active materials for flow control and nondeterministic predictive models for aerospace structures diagnostics and failure.

    He has developed and managed collaborative research and educational programs among a consortium of universities, aerospace industry, federal, state and local government to promote, recruit and graduate professionals in science, mathematics and engineering.

Publications

      Conference Paper 2013
      • Armanios, E. A., Kamat, M. P., and Lentz, W. K., “Optimum Coupling in Composite Thin-Walled Closed Section Beams,” COMPOSITES '95: Recent Advances in Japan and the United States, I. Kimpara, H. Miyairi & N. Takeda, Ed., Proc. Japan -U.S. CCM-VII, pp. 683-691.
        {Conference Paper} [Non-refereed/non-juried]

      Conference Proceeding 2012
      • Muder, S., Haynes, R.A, Armanios, E.A. (2012). Optimal Stacking Sequences for Thermally Induced Twist Deformation, Proceedings of the 53rd Structures, Structural Dynamics, and Materials Conference (SDM). Honolulu, Hawaii, April 23-26, 2012
        {Conference Proceeding} [Non-refereed/non-juried]
      2012
      • Tadros, Michael, Tan, Xinyuan, Haynes, Robert, and Armanios, Erian, “Design of an Apparatus and Method for Testing Bend-twist Coupled Composites”, Proceedings of the American Helicopter Society 68th Annual Forum, May 1-3, 2012, Fort Worth, Texas
        {Conference Proceeding} [Non-refereed/non-juried]

      Journal Article 2012
      • Haynes, R. and Armanios, E.A., “The Challenge of Achieving Hygrothermal Stability in Composites with Optimum Couplings,“ International Journal of Engineering Science, Vol. 59, October 2012, pp. 74-82
        {Journal Article} [Refereed/Juried]

      Journal Article 2011
      • Tawfik, S., Dancila, S., Armanios, E. “Piezoelectric Actuation of Bistable Panels for Morphing Applications”, Journal of Composites (Part A), Accepted for publication as of February 2011.
        {Journal Article} [Refereed/Juried]
      2011
      • Tawfik, S., Dancila, S., Armanios, E. “Planform Effects upon the Bistable Response of Cross-Ply Composite Shells”, Journal of Composites (Part A), January 2011.
        {Journal Article} [Refereed/Juried]

      Conference Paper 2011
      • Haynes, R.A. and Armanios, E.A. (2011). Hygrothermally Stable Extension-twist and Bend-twist Coupled Laminates, Proceedings of the 67th American Helicopter Society Annual Forum & Technology Display, Virginia Beach, Virginia, May 3-5, 2011.
        {Conference Paper} [Non-refereed/non-juried]
      2011
      • Haynes, R.A. and Armanios E.A. (2011). Hygrothermally Stable Laminates with Extension-Twist and Bend-Twist Couplings, accepted, 18th International Conference on Composite Materials, Jeju Island, Korea, August 21-26, 2011.
        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 2010
      • Dancila, D. S. and Armanios, E. A., “Energy-dissipating Composite Members with Progressive Failure: Impulsive Response and Experimental Verification,” AIAA Journal, Vol. 48, No. 4, pp. 728-737, April 2010
        {Journal Article} [Refereed/Juried]
      2010
      • Haynes, R., Dancila, D. S. and Armanios, E. A., “Analytical Investigation of the Toughening Potential of a Failure Tailoring Concept,” AIAA Journal, Vol. 48, No. 12, December 2010, pp. 2954-2961.
        {Journal Article} [Refereed/Juried]
      2010
      • Haynes, R. and Armanios, E. A., “New Families of Hygrothermally Stable Composite Laminates with Optimal Extension-Twist Coupling,” AIAA Journal, Vol. 48, No. 12, December 2010, pp. 2945-2953.
        {Journal Article} [Refereed/Juried]

      Conference Paper 2010
      • Haynes, R.A., Apte, A.P., Wang, B.P., and Armanios, E.A. (2010). Design of Optimal Hygrothermally Stable Laminates with Bending-Twist Coupling by Ant Colony Optimization. Proceedings of the 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, Fort Worth, TX, 13-15 September 2010.
        {Conference Paper} [Non-refereed/non-juried]
      2010
      • Haynes, R.A., Apte, A.P., Wang, B.P., and Armanios, E.A. (2010). Comparison of Optimal Hygrothermally Stable Laminates with Extension-Twist Coupling using Sequential Quadratic Programming and Ant Colony Optimization. Proceedings of the 25th Annual Technical Conference of the American Society for Composites, Dayton, OH, September 20-23, 2010.
        {Conference Paper} [Non-refereed/non-juried]
      2010
      • Haynes, R.A. and Armanios, E.A. (2010). Hygrothermally Stable Extension-twist Coupled Laminates with Bending-Twist Coupling, Proceedings of the 2010 ASME International Mechanical Engineering Congress and Exposition, Vancouver, Canada, November 12-18, 2010.
        {Conference Paper} [Non-refereed/non-juried]
      2010
      • Armanios, E.A. and Haynes, R., “The Challenge of Achieving Hygrothermal Stability in Aerospace Structures,” Invited Paper, Symposium in Honor of Dr. Robert Sierakowski, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, 12-15 April 2010, Orlando, FL, AIAA Paper 2010-2773.
        {Conference Paper} [Non-refereed/non-juried]
      2010
      • Haynes, R. and Armanios, E.A., “New Families of Hygrothermally Stable Composite Laminates with Optimal Extension-Twist Coupling,” 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, 12-15 April 2010, Orlando, FL, AIAA Paper 2010-2773.
        {Conference Paper} [Non-refereed/non-juried]
      2010
      • Tan, X. and Armanios, E.A., “Influence of Free-Edge Delamination on the Strength of Composite Joints,” 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, 12-15 April 2010, Orlando, FL, AIAA Paper 2010-3102.
        {Conference Paper} [Non-refereed/non-juried]
      2010
      • Armanios, E.A. and Haynes, R. (2010). The Challenge of Achieving Hygrothermal Stability in Composites with Coupling. Invited Paper, International Conference in honor of V. Berdichevsky's 65th Birthday, Bochum, Germany, 30 June – 2 July 2010.
        {Conference Paper} [Non-refereed/non-juried]
      2010
      • Apte, A.P., Haynes, R.A., Wang, B.P., and Armanios, E.A. (2010). Design of Optimal Hygrothermally Stable Laminates with Extension-Twist Coupling by Ant Colony Optimization. 2nd International Conference on Engineering Optimization, Lisbon, Portugal, 6-9 September 2010.
        {Conference Paper} [Non-refereed/non-juried]
      2010
      • Haynes, R. and Armanios, E. (2010). Hygrothermally Stable Laminates with Optimal Bending-Twist Couplings. Proceedings of the 36th European Rotorcraft Forum, Paris, France, 7-9 September 2010.
        {Conference Paper} [Non-refereed/non-juried]
      2010
      • Apte, A.P., Haynes, R.A., Wang, B.P., and Armanios, E.A. (2010). Design of Optimal Hygrothermally Stable Laminates with Extension-Twist Coupling by Ant Colony Optimization, Proceedings of the 2nd International Conference on Engineering Optimization, Lisbon, Portugal, September 6-9, 2010.
        {Conference Paper} [Non-refereed/non-juried]

      Conference Paper 2009
      • Haynes, R., and Armanios, E. A., “Overview of Hygrothermally Stable Laminates with Improved Extension-twist Coupling,” Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, UK, July 27-31, 2009
        {Conference Paper} [Non-refereed/non-juried]
      2009
      • Haynes, R., and Armanios, E. A., “Investigation of Hygrothermally Stable Laminates with Bending-Twist Coupling,” 1st Joint Canadian-American International Conference and the 24th Annual Technical ASC Conference, J. W. Gillespie, Jr. and S. V. Hoa, Eds., University of Delaware, MS, September 15-17, 2009.
        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 2008
      • Cross, R., Haynes, R., and Armanios, E., “Families of Hygrothermally Stable Asymmetric Laminated Composites,” Journal of Composite Materials, Vol. 42, No.7, 2008, pp. 697-716.
        {Journal Article} [Refereed/Juried]
      2008
      • Cottet, A., Armanios, E.A. and Gokhale, A.M., “Self similar particle distribution in particulate ceramic matrix composites I: Theoretical background and computer implementation,” Chaos, Solitons and Fractals, Volume 37, issue 3, August 2008, pp. 719-732.
        {Journal Article} [Refereed/Juried]

      Conference Paper 2008
      • Tawfik, S., Dancila, D. S., Tadros, M., and Armanios, E. A., “Influence of Geometry on the Stability Characteristics of Bi-Stable Cross-Ply Laminates,” Proceedings of the 23rd Annual Technical ASC Conference, T. Lacy, R. Sullivan and A. Vizzini, Eds., Mississippi State University, MS, September 9-11, 2008.
        {Conference Paper} [Non-refereed/non-juried]
      2008
      • Tawfik, S., Dancila, D. S., and Armanios, E. A., “Implementation of Bi-Stable Composite Concept for Wing Morphing,” Proceedings of the 23rd Annual Technical ASC Conference, Reddy Symposium, T. Lacy, R. Sullivan and A. Vizzini, Eds., Mississippi State University, MS, Sept. 2008.
        {Conference Paper} [Non-refereed/non-juried]
      2008
      • Haynes, R., Cross, R. and Armanios, E. A., “Experimental Verification of Hygrothermally Stable Laminates with Optimal Extension-Twist Coupling,” Proceedings of the 23rd Annual Technical ASC Conference, T. Lacy, R. Sullivan and A. Vizzini, Eds., Mississippi State University, MS, September 9-11, 2008.
        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 2007
      • Tan, X. and Armanios, E., “Strength of Quasi-isotropic Co-cured Composite Joints under Fatigue Loading,” Journal of ASTM International, vol. 4, no. 4, April 2007.
        {Journal Article} [Refereed/Juried]
      2007
      • Makeev, A., Nikishkov, Y., and Armanios, E., “A Concept for Quantifying Equivalent Initial Flaw Size Distribution in Fracture Mechanics based Life Prediction Models,” International Journal of Fatigue, vol.29, no.1, 2007, pps.141-145.
        {Journal Article} [Refereed/Juried]
      2007
      • Tawfik, S., Tan, X., Ozbay, S. and Armanios, E. “Anticlastic Stability Modeling for Cross-ply Composites,” Journal of Composite Materials, Volume 41, Number 11, June 2007, pp.1325-1338.
        {Journal Article} [Refereed/Juried]

      Conference Paper 2007
      • Cross, R., Haynes, R. and Armanios, E., “Design of Hygrothermally Stable Composites for Extension-twist Coupling,” Proceedings of 22nd Annual ASC Technical Conference, P. Feraboli and P. Stickler, Eds., The University of Washington, Seattle, WA, September 17-19, 2007.
        {Conference Paper} [Non-refereed/non-juried]
      2007
      • Tawfik, S., Dancila D. S. and Armanios, E., “Unsymmetric Composite Laminates Morphing via Piezoelectric Actuators,” Proceedings of 22nd Annual ASC Technical Conference, P. Feraboli and P. Stickler, Eds., The University of Washington, Seattle, WA, September 17-19, 2007.
        {Conference Paper} [Non-refereed/non-juried]
      2007
      • Tan, X., and Armanios, E. “An Assessment of Fatigue Limit Predictors of Graphite/Epoxy Co-cured Composite Joints through Quasi-static Acoustic Emission Count Peaks,” Proceedings of 22nd Annual Technical ASC Conference, P. Feraboli and P. Stickler, Eds., The University of Washington, Seattle, WA, September 17-19, 2007.
        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 2006
      • Cross, R., Makeev, A., and Armanios, E., “A Comparison of Predictions From Probabilistic Crack Growth Models Inferred From Virkler’s Data,” Journal of ASTM International, Vol.3, No.10, 2006.
        {Journal Article} [Refereed/Juried]
      2006
      • Cross, R., Makeev, A., and Armanios, E., “Simultaneous Uncertainty Quantification of Fracture Mechanics Based Life Prediction Model Parameters,” International Journal of Fatigue, Vol.29, No.10, pp. 1510-1515, 2006.
        {Journal Article} [Refereed/Juried]

      Conference Paper 2006
      • Makeev, A., Cross, R., and Armanios, E., “Probabilistic Crack Growth Analysis,” 9th Joint FAA/DOD/NASA Conference on Aging Aircraft, Atlanta, GA, March 6 – 9, 2006.
        {Conference Paper} [Non-refereed/non-juried]
      2006
      • Tan, X., and Armanios, E. “Comparison of Co-cured Composite Joint Strength under Fatigue Loading,” Proceedings of 21st Annual Technical ASC Conference, P. K. Mallick, Ed., The University of Michigan-Dearborn, Dearborn, MI, September 17-20, 2006.
        {Conference Paper} [Non-refereed/non-juried]
      2006
      • Tawfik, S., and Armanios, E., “Preliminary Investigation of a Morphing Wing Design Concept Employing Unsymmetric Cross-ply Composites Stability Characteristics,” Proceedings of 21st Annual Technical ASC Conference, P. K. Mallick, Ed., The University of Michigan-Dearborn, Dearborn, MI, September 17-20, 2006.
        {Conference Paper} [Non-refereed/non-juried]

      Book 2005
      • Applications Aéronautiques in Matériaux Composites, Claude Bathias et coll., pp. 265-295, L’Usine Nouvelle, DUNOD, Paris 2005.
        {Book} [Non-refereed/non-juried]

      Journal Article 2005
      • Ozbay, S. and Armanios, E.A., “Optimum Stacking Sequences for Extension-Twist Coupled Composites Subject to Thermal Stresses,” Journal of Advanced Composite Materials, No. 10, pps.410-422, 2005.
        {Journal Article} [Refereed/Juried]

      Conference Paper 2005
      • Makeev, A., Nikishkov, Y., and Armanios, E., “Nondeterministic Fatigue Crack Growth Analysis Framework,” 8th Joint FAA/DOD/NASA Conference on Aging Aircraft, Palm Springs, CA, January 31 – February 3, 2005.
        {Conference Paper} [Non-refereed/non-juried]
      2005
      • Ozbay, S., Armanios, E.A., Bauchau, O. and Dancila, D.S., “Extension-Twist Coupling Optimization in Composite Rotor Blades,” 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, 18 - 21 April, 2005, Austin, Texas, Vol.6, pp. 4069-4080. AIAA Paper 2005-2130.
        {Conference Paper} [Non-refereed/non-juried]
      2005
      • Tawfik, S., Tan, X., Ozbay, S., Armanios, E. “Modeling of Anticlastic Stability in Elastically Tailored Composites,” 20th Annual Technical ASC Conference, P. K. Mallick, Ed., F. Ko, G. Palmese, Y. Gogotsi and A. Wang Eds, Drexel University, Philadelphia, PA, September 7-9, 2005.
        {Conference Paper} [Non-refereed/non-juried]

      Book 2004
      • Proceedings of the Joint American Society for Composites/American Society for Testing and Materials Committee D30, E. Armanios and J. Reeder, Eds., DEStech Publications, Inc., 2004.
        {Book} [Non-refereed/non-juried]

      Conference Paper 2004
      • Makeev, A. and Armanios, E., “Nondeterministic Approaches to Prognostic Modeling,” AFOSR Workshop on Damage Prognosis of Metallic Materials, Washington DC, June 28-30, 2004.
        {Conference Paper} [Non-refereed/non-juried]
      2004
      • Ozbay, S., Tawfik, S., Xinyuan, T. and Armanios, E.A., “Optimum Stacking Sequences for Extension-Twist Coupled Strips under Mechanical Loading,” ASC/ASTM-D30 Joint 19th Annual Technical Conference, October 17-20, 2004, Atlanta, Georgia.
        {Conference Paper} [Non-refereed/non-juried]
      2004
      • Ozbay, S. and Armanios, E.A., “Optimum Stacking Sequences for Extension-Twist Coupled Composites Subject to Thermal Stresses,” 11th US-Japan Conference on Composite Materials, Sept. 9-11, 2004, Yamagata University, Yonezawa, Japan.
        {Conference Paper} [Non-refereed/non-juried]
      2004
      • Makeev, A., Nikishkov, Y., Cross, R., and Armanios, E., “Empirical Modeling Based on Neural Networks and Bayesian Learning,” 45th  AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, CA, April 19-22, 2004.
        {Conference Paper} [Non-refereed/non-juried]
      2004
      • Ozbay, S., Bauchau, O., Dancila, D.S. and Armanios, E., “Stability Analysis of Extension-Twist Coupled Composite Rotor Blades,” American Helicopter Society 60th Annual Forum, Vol. 1, 2004.
        {Conference Paper} [Non-refereed/non-juried]

      Book Review 2003
      • Book review:  “Analysis of Composite Structures,” C-Decolon, Hermes Sci Publ, Paris.  Applied Mechanics reviews, ASME Vol. 56, Number 1, January 2003, B5.
        {Book Review} [Non-refereed/non-juried]

      Conference Paper 2003
      • Kim, Inn B., Dancila, D. S. and Armanios, E. A., “Design, Manufacturing and Testing of Elastically Tailored Composite Star Beam Configurations,” 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, Norfolk, VA, April 7-10, 2003, AIAA –2003-1866.
        {Conference Paper} [Non-refereed/non-juried]
      2003
      • He, Y., Makeev, A., and Armanios, E. A., “3D Boundary Element Modeling of Laminated Composite Structures,” American Helicopter Society 59th Annual Forum, Phoenix, Arizona, May 6-8, 2003.
        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 2002
      • Dancila, D. S. and Armanios, E. A., “Energy-dissipating Composite Members with Progressive Failure-Concept Development and Analytical modeling,” AIAA Journal, Vol. 40, No. 10, pp. 2096-2104, October 2002.
        {Journal Article} [Refereed/Juried]

      Conference Paper 2002
      • Makeev, A., Tawfik, S., Tan, X., and Armanios, E.A., “Boundary Element Modeling for Delamination Analysis of Laminated Composite Structures,” American Helicopter Society 58th Annual Forum, Montreal, Canada, June 11-13, 2002.
        {Conference Paper} [Non-refereed/non-juried]

      Conference Paper 2001
      • Makeev, A. and Armanios, E. A., “Simple Boundary Element Analysis of Laminated Composite Structures,” 42nd Structures, Structural Dynamics and Materials Conference, Seattle, Washington, April 16-19, 2001.
        {Conference Paper} [Non-refereed/non-juried]
      2001
      • Coates, C. and Armanios, E., “Testing and Prediction of Co-Cured Composite Single Lap Joints with Modified Interface under Cyclic Loading,” 16th Annual ASC Technical Conference, Virginia Polytechnic Institute and State University Blacksburg, VA September 9-12, 2001.
        {Conference Paper} [Non-refereed/non-juried]
      2001
      • Muliana, A. H., Haj-Ali, R. M., Coates, C. W. , and Armanios, E. A. , “Failure Prediction of Co-Cured Composite Single Lap Joints with Modified Interface,” 16th Annual ASC Technical Conference, Virginia Polytechnic Institute and State University Blacksburg, VA September 9-12, 2001.
        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 2000
      • Makeev, A. and Armanios, E. A., “An Iterative Method for Solving Elasticity Problems for Composite Laminates,” ASME Journal of Applied Mechanics, Vol. 67, pp.96-104, March 2000.
        {Journal Article} [Refereed/Juried]

      Conference Paper 2000
      • Gregory, R. O., Armanios, E. A. and Schleisman, M., “Analysis and Testing of Extension-twist Coupled Composite Using Symmetric Configurations,” 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, Atlanta, GA, April 3-6, 2000, AIAA –2000-1469.
        {Conference Paper} [Non-refereed/non-juried]
      2000
      • Coates, C.W. and Armanios, E.A., “Monotonic and Fatigue Response of Co-cured Composite Lap joints with Modified Interfaces,” American Helicopter Society 56th Annual Forum, Virginia Beach, VA, May 2-4, 2000.
        {Conference Paper} [Non-refereed/non-juried]
      2000
      • Makeev, A. and Armanios, E.A., “Simple Analytical Modeling of Tapered Laminates for Rotorcraft Applications,” American Helicopter Society 56th Annual Forum, Virginia Beach, VA May 2-4, 2000.
        {Conference Paper} [Non-refereed/non-juried]
      2000
      • Kim, B., Dancila, D. S. and Armanios, E.A., “Extension-twist Coupled Composite Members with Tailored Stiffness,” American Helicopter Society 56th Annual Forum, Virginia Beach, VA May 2-4, 2000.
        {Conference Paper} [Non-refereed/non-juried]
      2000
      • Coates, C., and Armanios, E.A., “Assessment of Nested Overlap and Transverse Interfacial Layer in Co-Cured Composite Single Lap Joints,” Fifteenth Annual ASC/ASTM D-30 Technical Conference, Texas A & M University, Texas, Sept 24-27, 2000, pps. 1161-1172.
        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 1999
      • Makeev, A. and Armanios, E., “Elasticity Solution for Torsional Rigidity of Pretwisted Laminated Composites Strips,” Journal of Engineering Mechanics, ASCE, Vol. 125, No. 10, pp. 1147-1153, 1999.
        {Journal Article} [Refereed/Juried]
      1999
      • Makeev, A. and Armanios, E., “A Simple Elasticity Solution for Predicting Interlaminar Stresses in Laminated Composites,” Journal of the American Helicopter Society, Vol. 44, pp. 94-100, April 1999.
        {Journal Article} [Refereed/Juried]
      1999
      • Dancila, D. S., Armanios, E. A. and Lentz, W. K., “Free Vibration of Thin-Walled Closed-Section Composite Beams with Optimum and Near-Optimum Coupling,” Journal of Thermoplastic Composite Materials, Vol. 12, pp. 2-12, January 1999.
        {Journal Article} [Refereed/Juried]

      Conference Paper 1999
      • Makeev, A. and Armanios, E. A., “Influence of Damage on the Elastic Behavior of Composite Flexbeams,” American Helicopter Society 55th Annual Forum, Montreal, Canada, May 25-27, 1999.
        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 1998
      • Makeev, A. and Armanios, E., “A Finite Displacement Model for Laminated Composite Strips with Extension-twist Coupling in the Presence of Delamination,” ASME Journal of Applied Mechanics, Vol. 65, pp.685-693, September 1998.
        {Journal Article} [Refereed/Juried]
      1998
      • Dancila, D. S. and Armanios, E., “The Influence of Coupling on the Free Vibration of Thin-Walled Closed-Section Beams,” International Journal of Solids and Structures, Vol. 35, No. 23, pp.3105-3119, 1998.
        {Journal Article} [Refereed/Juried]
      1998
      • Makeev, A. and Armanios, E., “On a Higher Order Analysis of Laminated Composite Strips with Extension-Twist Coupling,” International Journal of Solids and Structures, Vol. 36, No.7, pp 1081-1098, 1998.
        {Journal Article} [Refereed/Juried]
      1998
      • Lentz, W. K. and Armanios, E. A., “Optimum Coupling in Thin-walled, closed section Composite Beams,” Journal of Aerospace Engineering, ASCE, Vol. 11, No. 3, pp. 81-89, July 1998.
        {Journal Article} [Refereed/Juried]
      1998
      • Makeev, A. and Armanios, E., “Influence of Curing Stresses on Extension-twist Coupling in Pre-twisted Composite Laminates,” AIAA Journal, Vol. 36, No. 9, pp. 1714-1720, September 1998.
        {Journal Article} [Refereed/Juried]

      Conference Paper 1998
      • Dancila, D. S. and Armanios, “Energy-dissipating Composite Members with Progressive Failure,” 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics Westin Long Beach, Long Beach, CA  April 20-23, 1998, AIAA 98-1704.
        {Conference Paper} [Non-refereed/non-juried]
      1998
      • Makeev, A. Armanios, E. A. and Hooke, D. A., “The Influence of Curing Stresses on the Extension-twist Coupling in Pre-twisted Composite Laminates,” 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference and exhibit, Westin Long Beach, Long Beach, CA  April 20-23, 1998, AIAA 98-1811, pp.972-982.
        {Conference Paper} [Non-refereed/non-juried]
      1998
      • Makeev, A. and Armanios, E., “A Simple Elasticity Solution for Predicting Interlaminar Stresses in Composite Flexbeams,” 54th AHS Annual Forum and Technology Display, American Helicopter Society Inc., pp 977-985, 1998.
        {Conference Paper} [Non-refereed/non-juried]
      1998
      • Dancila, D. S., Kim, I. and Armanios, E. A., “Star-Shape Cross-Section Extension-Twist-Coupled Composite Beams for Rotorcraft Applications,” 54th AHS Annual Forum and Technology Display, American Helicopter Society Inc., pp 1044-1049, 1998.
        {Conference Paper} [Non-refereed/non-juried]
      1998
      • Dancila, D. S. and Armanios, E. A., “Crew/payload Crash Protection by Using Energy-Dissipating Tensile Composite Members with Progressive Failure,” AHS/SAFE Crash worthiness Specialists’ Meeting on Crash Safety Challenges and Innovative Solutions, Phoenix, AZ, September 14-16, 1998,pp. 28-35.
        {Conference Paper} [Non-refereed/non-juried]
      1998
      • Dancila, D. S. and Armanios, E. A., “Dynamic Response of Energy-Dissipating Tensile Component Members under Impact Loading,” ASC 13th Technical Conference, Baltimore, MD, September 21-23, 1998, pp.534-556.
        {Conference Paper} [Non-refereed/non-juried]
      1998
      • Dancila, D. S., Kim, I. and Armanios, E. A., “Efficient Implementation of Extension-Twist Coupling for Rotorcraft Applications,” AHS Technical Specialists Meeting, Affordable Composite Structures, Bridgeport, Connecticut, October 7-8, 1998.
        {Conference Paper} [Non-refereed/non-juried]
      1998
      • Dancila, D. S. and Armanios, E. A., “Large Displacement Piezoelectric Actuator Configurations,” Adaptive Structures and Material Systems Symposium, International Mechanical Engineering Congress & Exposition, ASME winter Annual Meeting, Anaheim, CA, November 15-20, 1998, pp. 83-87.
        {Conference Paper} [Non-refereed/non-juried]

      Book 1997
      • Composite Materials: Fatigue and Fracture (Sixth Volume) ASTM STP 1285, E. A. Armanios, Ed., American Society for Testing and Materials, 1997.
        {Book} [Non-refereed/non-juried]

      Journal Article 1997
      • Hooke, D. A., Armanios, E. A., Dancila, D. S., Thakker, A., and Doorbar, P., “Failure of a Ti Metal Matrix Composite Cylindrical Shell under Internal Pressure,” Composite Materials: Fatigue and Fracture (Sixth Volume) ASTM STP 1285, E. A. Armanios, Ed. American Society for Testing and Materials, 1997, pp. 27-44.
        {Journal Article} [Refereed/Juried]
      1997
      • Palmer, D. W., Armanios, E. A. and Hooke, D. A., “Fracture Analysis of Internally Delaminated Unsymmetric Laminated Composite Plates,” Composite Materials: Fatigue and Fracture (Sixth Volume) ASTM STP 1285, E. A. Armanios, Ed. American Society for Testing and Materials, 1997, pp. 344-364.
        {Journal Article} [Refereed/Juried]

      Conference Paper 1997
      • Dancila, D. S., Coates, C. Lentz, W. K., and Armanios, E. A., “Dynamic Response of Two-Celled Composite Beams With Optimum Extension-twist Coupling,” Seventh International Workshop on Dynamics and Aeroelastic Stability Modeling of Rotorcraft , Session III, St. Louis, MO, 1997.
        {Conference Paper} [Non-refereed/non-juried]
      1997
      • Dancila, D. S., Armanios, E. A. and Lentz, W. K., “Free Vibration of Thin-Walled Closed-Section Composite Beams with Optimum and Near-Optimum Coupling,” 12th ASC Technical Conference, Dearborn, MI, 1997, pp. 521-530.
        {Conference Paper} [Non-refereed/non-juried]

      Book Chapter 1996
      • Co-author of section entitled “Analysis of FreeEdge delamination in Unsymmterical Composite Laminates,” pp. 85-130, Fracture of Composites, E. A. Armanios Ed., Key Engineering Materials, Vol. 120-121, 1996, TransTec Publications, Switzerland.
        {Book Chapter} [Non-refereed/non-juried]

      Book 1996
      • Fracture of Composites, E. A. Armanios Ed., Key Engineering Materials, Vol. 120-121, 1996, TransTec Publications, Switzerland.
        {Book} [Non-refereed/non-juried]

      Journal Article 1996
      • Hooke, D. A. and Armanios, E. A., “Design and Evaluation of Three Methods for Testing Extension-twist-Coupled Laminates,” Composite Materials: Testing and Design (Twelfth Volume) ASTM STP 1274, C. R. Saff and R. B. Deo, Eds. American Society for Testing and Materials, 1996, pp. 340-357.
        {Journal Article} [Refereed/Juried]
      1996
      • Armanios, E. A., Makeev, A., and Hooke, D. A., “Finite-Displacement Analysis of Laminated Composite Strips with Extension-twist Coupling,” Journal of Aerospace Engineering, ASCE, Vol. 9, No. 3, July, 1996, pp. 80-91.
        {Journal Article} [Refereed/Juried]

      Conference Paper 1996
      • Lentz, W. K. and Armanios, E. A., “Constrained Optimization of Thin-Walled Composite Beams with Coupling,” 37th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials (SDM) Conference, Salt Lake City, UT, 1996, Part 4, AIAA-96-1582, pp. 2326-2334.
        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 1995
      • Parnas, L., Armanios, E. A., Sriram, P. and Rehfield, L., “Postbuckling and Crippling of I-Section Composite Stiffeners,” Journal of Aerospace Engineering, Vol. 8, No. 1, January, 1995, pp.32-42.
        {Journal Article} [Refereed/Juried]
      1995
      • Armanios, E. A., and Badir, A. M., “Free Vibration Analysis of Anisotropic Thin-Walled Closed-Section Beams,” AIAA Journal , Vol. 33, No. 10, October 1995, pp.1905-1910.
        {Journal Article} [Refereed/Juried]
      1995
      • Sriram, P. and Armanios, E. A., “Shear Deformation Analysis of the Energy Release Rate of Transverse Cracking in Laninated Composites,” Composite Materials: Fatigue and Fracture (FifthVolume), ASTM STP 1230, Roderick H. Martin, Ed., American Society for Testing and Materials, Philadelphia, 1995, pp. 215-231.
        {Journal Article} [Refereed/Juried]

      Conference Paper 1995
      • Dancila, D. and Armanios, E., “The Influence of Coupling on the Free Vibration of Thin-Walled Closed-Section Beams,” 36th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials (SDM) Conference, New Orleans, LA, 1995, Part 4, AIAA-95-1411-CP, pp. 2106-2115.
        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 1994
      • Li, J., and Armanios, E. A., “Influence of Free-Edge Delaminations on the Extension-Twist Coupling of Elastically Tailored Composite Laminates,” Mathl. Comput. Modeling, Pergamon Press,Vol. 19, No. 3/4, pp. 89-107, 1994.
        {Journal Article} [Refereed/Juried]

      Conference Paper 1994
      • Armanios, E. A., and Badir, A. M., “Free Vibration Analysis of Anisotropic Thin-Walled Beams,” 35th AIAA/ASME/AHS/ASC Structures, Structural Dynamics and Materials (SDM) Conference, Hilton Head, SC, 1994, Vol. I, AIAA-94-1327-CP, pp. 164-171.
        {Conference Paper} [Non-refereed/non-juried]
      1994
      • Armanios, E. A., Badir, A. M., Dancila, D. S., Thakker, A., and Doorbar, P., “Free Vibration of a Metal Matrix Composite Shell with Circumferencial Reinforcement,” 35th AIAA/ASME/AHS/ASC Structures, Structural Dynamics and Materials (SDM) Conference, Hilton Head, SC, 1994, Vol. I, AIAA-94-1328-CP, pp. 172-181.
        {Conference Paper} [Non-refereed/non-juried]
      1994
      • Armanios, E. A., “Elastically Tailored Composites: Analysis Design and Testing,” The U. S.-Russian Workshop on Computer Synthesis of Structure and Properties of Advanced Composites, Moscow, Russia, May 10-11, 1994, pp. 194-218.
        {Conference Paper} [Non-refereed/non-juried]
      1994
      • Palmer, David W., and Armanios, Erian A., “The Effect of Internal Delamination on the Extension Twist Coupling in Elastically Tailored laminated Plates,” Proceedings of the 26th International SAMPE Technical Conference, Atlanta, Georgia, October 24-27, 1994, pp. 128-141.
        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 1993
      • Armanios, E. A. and Li, Jian, “Interlaminar Fracture Analysis of Unsymmetrical Laminates,” Composite Materials: Fatigue and Fracture, Fourth Volume, ASTM STP 1156, W. W. Stinchcomb and N. E. Asbaugh, Eds., American Society for Testing and Materials, Philadelphia, 1993, pp. 341-360.
        {Journal Article} [Refereed/Juried]
      1993
      • Sriram, P. and Armanios, E. A., “A Shear Deformation Model for Transverse Cracking in Composite Laminates,” International Journal of Damage Mechanics, Vol. 2, No. 1, January, 1993, pp. 73-91.
        {Journal Article} [Refereed/Juried]
      1993
      • Armanios, E. A., Hooke, D., Kamat, M., Palmer, D., and Li, J., “Design and Testing of Composite Laminates for Optimum Extension-Twist Coupling,” Composite Materials: Testing and Design (Eleventh Volume), ASTM STP 1206, E. T. Camponeschi, Jr., Ed., American Society for Testing and Materials, Philadelphia, 1993, pp. 249-262.
        {Journal Article} [Refereed/Juried]

      Conference Paper 1993
      • Berdichevsky, V., Armanios, E. and Badir, M., “A New Look at Thin-Walled Composite Beam Modeling,” Ninth International Conference on Composite Materials (ICCM 9), Madrid, Spain, July 12-16, 1993, Vol. III, pp. 219-226.
        {Conference Paper} [Non-refereed/non-juried]
      1993
      • Li, J. and Armanios, E. A., “Effect of Damage on an Elastically Tailored Laminated Composite Plate,” Ninth International Conference on Composite Materials (ICCM 9), Madrid, Spain, July 12-16, 1993, Vol. VI, pp. 728-735.
        {Conference Paper} [Non-refereed/non-juried]
      1993
      • Uda, N., Parnas, L. and Armanios, E. A., “Stress Field in Postbuckled Composite Stiffeners Loaded in Compression,” Advanced Composites ' 93, International Conference on Advanced Composites, Edited by T. Chandra and A. K. Dhingra, The Minerals, Metals & Materials Society, 1993, pp. 315-321.
        {Conference Paper} [Non-refereed/non-juried]
      1993
      • Badir, A. M., Berdichevsky , V. and Armanios, E. A., “Theory of Anisotropic Thin-Walled Opened-Cross-Section Beams,” 34th AIAA/ASME/AHS/ASC Structures, Structural Dynamics and Materials (SDM) Conference, La Jolla, CA, April 19-21, 1993, pp. 2761-2770.
        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 1992
      • Armanios, E. A., “Interlaminar Stress and Strain Energy Release Rate Predictions in Composites by Singular Fitting,” Fracture Mechanics: Twenty-Second Symposium (Volume I), ASTM STP 1131, H. A. Ernst, A. Saxena, and D. L. McDowell, Eds., American Society for Testing and Materials, Philadelphia, 1992, pp. 560-577.
        {Journal Article} [Refereed/Juried]
      1992
      • Li, Jian and Armanios, E. A., “Analysis of Unidirectional and Cross-Ply Laminates Under Torsion Loading,” Fracture Mechanics: Twenty-Second Symposium (Volume II), ASTM STP 1131, S. N. Atluri, J. C. Newman, Jr., I. S. Raju, and J. S. Epstein, Eds., American Society for Testing and Materials, Philadelphia, 1992, pp. 421-435.
        {Journal Article} [Refereed/Juried]
      1992
      • Berdichevsky, V., Armanios, E. A. and Badir, A., “Theory of Anisotropic Thin-walled Closed-cross-section Beams,” Composites Engineering, Vol. 2, Nos. 5-7, pp. 411-432, 1992.
        {Journal Article} [Refereed/Juried]

      Conference Paper 1992
      • Armanios, E. A. and Li, J., “Damage Characterization of S2/SP250 Glass/Epoxy Laminates under Torsion Loading,” Sixth Japan-U.S. Conference on Composite Materials, Orlando, Florida, 22-24 June, 1992, pp. 753-761.
        {Conference Paper} [Non-refereed/non-juried]
      1992
      • Armanios, E. A., Hooke, D., and Li, J., “Interlaminar Fracture Testing and Analysis of Composite Laminates with Extension-Twist Coupling,” Developments in Theoretical and Applied Mechanics, Volume XVI, Sixteenth Southeastern Conference on Theoretical and Applied Mechanics (SECTAM), Nashville, Tennessee, April 12-14, 1992, pp. II.15.21-II.15-27.
        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 1991
      • Armanios, E. A. and Li, Jian, “Interlaminar Stress Predictions for Laminated Composites under Bending, Torsion and Their Combined Effect,” Composites Engineering, Vol. 1, No. 5, pp. 277-291, 1991.
        {Journal Article} [Refereed/Juried]
      1991
      • Armanios, E. A., "Delamination Analysis Models for Laminated Composites I- Fundamentals," Journal of Aerospace Engineering, ASCE, Vol. 4, No. 2, April 1991, pp. 194-215.
        {Journal Article} [Refereed/Juried]
      1991
      • Armanios, E. A., “Delamination Analysis Models for Laminated Composites II-Numerical Verification,” Journal of Aerospace Engineering, ASCE, Vol. 4, No. 2, April 1991, pp. 216-235.
        {Journal Article} [Refereed/Juried]
      1991
      • Armanios, E. A., and Parnas, L., “Delamination Analysis of Tapered Laminated Composites Under Tensile Loading,” Composite Materials: Fatigue and Fracture (Third Volume), ASTM STP 1110, T. K. O'Brien, Ed., American Society for Testing and Materials, Philadelphia, 1991, pp. 340-358.
        {Journal Article} [Refereed/Juried]
      1991
      • (b)Armanios, E. A., Sriram, P., and Badir, A.M., “Fracture Analysis of Transverse Crack-Tip and Free Edge Delamination in Laminated Composites,” Composite Materials:  Fatigue and Fracture (Third Volume), ASTM STP 1110, T. K. O'Brien, Ed., American Society for Testing and Materials, Philadelphia, 1991, pp. 269-286.
        {Journal Article} [Refereed/Juried]
      1991
      • Fortson, B. H. and Armanios, E. A., “Damage Processes in a Quasi-isotropic Composite Short-Beam Under Three-point Loading,” Journal of Composites Technology & Research, Vol. 13, No. 4, Winter 1991, pp. 259-256.
        {Journal Article} [Refereed/Juried]

      Conference Paper 1991
      • Armanios, E. A., Badir, A. and Berdichevsky, V., “Effect of Damage on Elastically Tailored Composite Laminates,” AHS International Technical Specialists' Meeting on Rotorcraft Basic Research, Atlanta, Georgia, March 25-27, 1991, pp. (48-1)-(48-11).
        {Conference Paper} [Non-refereed/non-juried]
      1991
      • Armanios, E. A. and Li, Jian, “A Fracture Analysis Model for Composite Laminates Under Combined Loading,” Eighth International Conference on Composite Materials (ICCM 8), Honolulu, Hawaii, July 15-19, 1991, pp. 27 A-1, 27 A-12.
        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 1990
      • Armanios, E. A., Rehfield, L. W. and Weinstein, F., “Understanding and Predicting Sublaminate Damage Mechanisms in Composite Structures,” Composite Materials: Testing and Design (Ninth Volume), ASTM STP 1059, S. Garbo, Ed., American Society for Testing and Materials, Philadelphia, 1990, pp. 231-249.
        {Journal Article} [Refereed/Juried]
      1990
      • (a)Armanios, E. A., Rehfield, L. W., Weinstein, F. and Reddy, A. D., “Interlaminar Fracture of Composites under Tension and Compression,” Journal of Aerospace Engineering, ASCE, Vol. 3, No. 1, January 1990, pp. 30-45.
        {Journal Article} [Refereed/Juried]
      1990
      • Armanios, E. A. and Badir, A.M., “Hygrothermal Influence on Mode I Edge Delamination in Composites,” Journal of Composite Structures, Vol. 15, No. 4, 1990, pp. 323-342.
        {Journal Article} [Refereed/Juried]

      Conference Paper 1990
      • Armanios, E. A. and Li, Jian, “Interlaminar Stress Analysis for Laminated Composites Under Torsion  Loads,” Fifteenth Southeastern Conference on Theoretical and Applied Mechanics (SECTAM), Atlanta, Georgia, March 22-23, 1990,  Volume XV, pp. 7-14.
        {Conference Paper} [Non-refereed/non-juried]

      Book Chapter 1989
      • Author of section entitled “Interlaminar Fracture in Graphite/Epoxy in Composites,” pp. 85-102, Interlaminar Fracture of Composites, E. A. Armanios Ed., Key  Engineering Materials, Vol. 37, 1989, Trans Tech Publications, Switzerland
        {Book Chapter} [Non-refereed/non-juried]

      Book 1989
      • Interlaminar Fracture of Composites, E. A. Armanios Ed., Key  Engineering Materials, Vol. 37, 1989, Trans Tech Publications, Switzerland.
        {Book} [Non-refereed/non-juried]

      Journal Article 1989
      • Armanios, E. A. and Rehfield, L. W., “Sublaminate Analysis of Interlaminar Fracture in Composites: Part I - Analytical Model,” Journal of Composites Technology & Research, Vol. 11, No. 4, Winter 1989, pp. 135-146.
        {Journal Article} [Refereed/Juried]
      1989
      • Armanios, E. A. Rehfield, L. W., Raju, I. S., and O'Brien, T. K., “Sublaminate Analysis of Interlaminar Fracture in Composites:  Part II--Applications,”  Journal of Composites Technology & Research,  Vol. 11, No. 4, Winter 1989, pp. 147-153.
        {Journal Article} [Refereed/Juried]

      Conference Paper 1989
      • Armanios, E. A., Badir, A. and Sriram, P., “Sublaminate Analysis of Mode I Edge Delamination in Laminated Composites,” AIAA/ASME/AHS/ASC 30th Structures, Structural Dynamics and Materials (SDM) Conference, Mobile, Alabama, April 3-5, 1989, pp. 2109-2116.
        {Conference Paper} [Non-refereed/non-juried]
      1989
      • Sriram, P., and Armanios, E. A., “Fracture Analysis of Local Delaminations in Laminated Composites,” AIAA/ASME/ASCE/AHS/ASC 30th (SDM) Conference, Mobile, Alabama, April 3-5, 1989, pp. 2109-2116.
        {Conference Paper} [Non-refereed/non-juried]
      1989
      • Armanios, E. A. and Badir, A.M., “Hygrothermal Influence on the Edge Delamination in Composites,” Fourth ASC Technical Conference, V.P.I. Blacksburg, VA, October 3-5, 1989, pp. 944-950.
        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 1988
      • Armanios, E. A. and Rehfield, L. W., “Interlaminar Fracture Analysis of Composite Laminates Under Bending and Combined Bending and Extension,” Composite Materials:  Testing and Design (Eight Conference), ASTM STP 972, J. D. Whitcomb, Ed., American  Society for Testing and Materials, Philadelphia, 1988, pp. 81-94.
        {Journal Article} [Refereed/Juried]
      1988
      • Reddy, A. D., Rehfield, L. W., Weinstein, F., and Armanios, E. A., “Interlaminar Fracture Processes in Resin Matrix Composites Under Static and Fatigue Loading,” Composite Materials:  Testing and Design (Eight Conference), ASTM STP 972, J. D. Whitcomb, Ed., American Society for Testing and Materials, Philadelphia, 1988, pp. 340-355.
        {Journal Article} [Refereed/Juried]

      Conference Paper 1988
      • Armanios, E. A. and Rehfield, L. W., “A Simplified Approach to Strain Energy Release Computations for Interlaminar Fracture of Composites,” Fourth Japan-U.S. Conference on Composite Materials, June 27-29, 1988, Washington, D. C., Technomic Publishing Co., pp. 285-296.
        {Conference Paper} [Non-refereed/non-juried]
      1988
      • Fortson, B., Webb, G., and Armanios, E. A., “Fracture Surface Morphology and Crack Arrest in Cracked Lap Shear Composite Specimens,” International Symposium on Testing and Failure Analysis, ASM International, Metals Park, OH, 1988, pp. 299-306.
        {Conference Paper} [Non-refereed/non-juried]
      1988
      • Armanios, E. A. and Mahler, M. A., “Residual Thermal and Moisture Influences on the Free-Edge Delamination of Laminated Composites,” AIAA/ASME/ASCE/AHS 19th Structures, Structural Dynamics and Materials (SDM) Conference, Part 1, pp. 371-381, 1988.
        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 1986
      • Armanios, E. A., Rehfield, L. W. and Reddy,   A. D., “Design  Analysis and Testing for Mixed-Mode and Mode II Interlaminar Fracture of Composites,” Composite Materials:  Testing and Design (Seventh Conference), ASTM STP 893, J. M. Whitney, Ed., American Society for Testing and Materials, Philadelphia, 1986, pp. 232-255.
        {Journal Article} [Refereed/Juried]

      Conference Paper 1986
      • Armanios, E. A. and Rehfield, L. W., “Interlaminar Analysis of Laminated Composites Using a Sublaminate Approach,” AIAA/ASME/ASCE/AHS 27th Structures, Structural Dynamics, and Materials (SDM) Conference, San Antonio, Texas, 19-21 May, 1986. AIAA Paper No. 86-0969CP, Part 1, pp. 442-452.
        {Conference Paper} [Non-refereed/non-juried]
      1986
      • Rehfield, L. W., Armanios, E. A. and Weinstein, F., “Analytical Modeling of Interlaminar Fracture in Laminated Composites,” Composites '86: Recent Advances in Japan and the United States, Third Japan-U.S. Conference on Composite Materials, K. Kawata, S. Umekawa, and A. Kobayashi, Eds., pp. 331-340, 1986.
        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 1985
      • Rehfield, L. W., Armanios, E. A. and Changli, Q., “Analysis of Behavior of Fibrous Composite Compression Specimen,” Recent Advances in Composites in the United States and Japan, ASTM STP 864, J. R. Vinson and M. Taya, Eds., American Society for Testing and Materials, Philadelphia, 1985, pp. 236-252.
        {Journal Article} [Refereed/Juried]
      1985
      • Rehfield, L. W., Armanios, E. A. and Valisetty, R. R., “Simplified Sublaminate Analysis of Composites and Applications,” Computers and Structures, Vol. 20, 1985, pp. 401-411.
        {Journal Article} [Refereed/Juried]

      Journal Article 1983
      • Armanios, E. A., and Negm, H. M., “An Improved Rectangular Element for Plate Bending Analysis,” Computers and Structures, Vol. 16, No. 5, pp. 677-686, 1983.
        {Journal Article} [Refereed/Juried]
      1983
      • Armanios, E. A., Negm, H. M. and Smith, C.V., “A Technical Comment on the Determination of the Optimal Parametric Rectangular Plate Element,” Computers and Structures, Vol. 16, No. 5, pp. 687, 1983.
        {Journal Article} [Refereed/Juried]
      1983
      • Negm, H. M. and Armanios, E. A., “Calculation of the Natural Frequencies and Steady State Response of Thin Plates in Bending by an Improved Rectangular Element,” Computers and Structures, Vol. 16, No. 5, pp. 687-1983.
        {Journal Article} [Refereed/Juried]

      Conference Paper 1982
      • Rehfield, L. W., Reddy, A. D., Yehezkely, O. and Armanios, E.,  “Buckling of Continuous Filament Composite Isogrid Panels:  Theory and Experiment,” Progress in Science and Engineering of Composites,  ICCM-IV, Tokyo, Vol. 1, pp. 545-554, 1982.
        {Conference Paper} [Non-refereed/non-juried]

Presentations

  • Past
    •  
      Invited Speaker, member of the Army Research Office's US delegation, U. S.-Russian Workshop on Computer Synthesis of Structure and Properties of Advanced Composites, Institute of Applied Mechanics, Russian Academy of Sciences, Moscow, Russia, May 10
  • Past
    •  
      Symposium Chairman, Sixth Symposium on Composite Materials: Fatigue and Fracture, Denver, Colorado, May 16-17, 1995.
  • Past
    •  
      ASTM Wayne Stinchcomb Lecture, 17th Annual Technical Conference, American Society for Composites, October 21-23, 2002
  • Past
    •  
      Invited Speaker, Institut de Technologie et Matériaux Avancés (ITAM), Conservatoire National des Arts et Métiers (CNAM), Paris, France, April 10, 2003.
  • Past
    •  
      Symposium Chairman, ASC/ASTM-D30 Joint 19th Annual Technical Conference October 17-20, 2004 - Atlanta, Georgia.

Support & Funding

This data is entered manually by the author of the profile and may duplicate data in the Sponsored Projects section.
    • Jan 1989 to Present Aircraft Structural Integrity of the MH-53J Helicopter sponsored by  - $98000
    • Jan 2006 to Jan 2011 Effects of Defects on Structural Reliability of Rotorcraft Composite Dynamic Components sponsored by  - $750000
    • Jan 2008 to Jan 2010 Medical Imaging Generated Dynamic Prosthetic Sockets sponsored by  - $600000
    • Jan 2005 to Jan 2008 NSF-FAST Scholarships, (Recompete) sponsored by  - $400000
    • Jan 2004 to Jan 2005 NASA Student Involvement Program sponsored by  - $551489
    • Jan 2004 to Jan 2005 International Space Station Engineering Outreach Program sponsored by  - $30000
    • Jan 2001 to Jan 2005 NSF-FAST Scholarships sponsored by  - $400000
    • Jan 2000 to Jan 2005 National Rotorcraft Center of Excellence sponsored by  - $1566463
    • Jan 2003 to Jan 2004 NASA Workforce development program sponsored by  - $100000
    • Jan 1999 to Jan 2003 National Space Grant College/Consortium and Fellowship Program sponsored by  - $3400000
    • Jan 1997 to Jan 2000 NASA Graduate Student Researchers Program sponsored by  - $66000
    • Jan 1995 to Jan 2000 National Rotorcraft Center of Excellence sponsored by  - $499893
    • Jan 1995 to Jan 1998 National Space Grant College/Consortium and Fellowship Program sponsored by  - $1830000
    • Jan 1994 to Jan 1996 Augmentation of Research at the Center of Excellence in Rotorcraft Technology (CERT) sponsored by  - $225000
    • Jan 1993 to Jan 1996 Center of Excellence in Rotorcraft Technology sponsored by  - $195380
    • Jan 1992 to Jan 1995 Damage Tolerance Analysis for Composite Rotorcraft Structures sponsored by  - $141000
    • Jan 1992 to Jan 1995 Advanced Composites and Smart Structures Research sponsored by  - $137350
    • Jan 1992 to Jan 1994 National Space Grant College/Consortium and Fellowship Program sponsored by  - $640000
    • Jan 1988 to Jan 1993 Center of Excellence for Rotary Wing Aircraft Technology sponsored by  - $298718
    • Jan 1988 to Jan 1990 Analysis of Interlaminar Fracture in Composites Under Combined Loading sponsored by  - $110000
    • Jan 1990 to Jan 1992 Effect of Damage on Elastically Tailored Composites sponsored by  - $115000
    • Jan 1998 to Jan 1988 Design Analysis and Development Testing of the MH-53J sponsored by  - $75487
    • Jan 1986 to Jan 1988 Analysis of Delamination Related Fracture Processes in Composites sponsored by  - $120000
    • Jan 1985 to Jan 1986 Sublaminate Analysis of Interlaminar Fracture in Composites sponsored by  - $57400

Patents

    • Oct 2000 5,791,601 and 6,142,425  Apparatus and Method for Aerodynamic Blowing Control Using Smart Materials

      Co-Inventor D. Stefan Dancila

    • Oct 2000 6,136,406  Energy-Dissipating Composite Members with Progressive Failure

      Co-Inventor D. Stefan Dancila

    • Oct 1999 5,661,247 and 5,967,017  Rotational Displacement Apparatus with Ultra-low Torque and High Thrust Load Capability

      Co-Inventor David Hooke

Peers Mentored

  • thumbnail
    Duration : Jan 2015 to Present
    Affiliated Faculty in our laboratory.

Collaborators

    • thumbnail
      Duration : May 2013 to Present

      Post Doctoral Fellow, Mechanical and Aerospace Engineering

      Works in the area of structural analysis, design and testing of advanced composites. Has experience in finite element modeling, design, manufacturing, testing, and non-destructive evaluation of composites, including performing tests according to ASTM standards and modifying ASTM standards to needs. Statistical modeling experience includes sampling techniques for use with Bayesian modeling.

    • thumbnail
      Duration : June 2010 to June 2012

      Mentor 

      Post Doctoral Associate, Mechanical & Aerospace Engineering

Courses

      • MAE 2312-002 Solid Mechanics

        This course covers the relationships between stresses and strains in elastic bodies and the tension, compression, shear, bending, torsion, and combined loadings which produce them. It also covers the deflections and elastic curves, shear and bending moment diagrams for beams, and column theory.

        Fall - Regular Academic Session - 2016 Download Syllabus Contact info & Office Hours
      • MAE 2312-001 Solid Mechanics

        This course covers the relationships between stresses and strains in elastic bodies and the tension, compression, shear, bending, torsion, and combined loadings which produce them. It also covers the deflections and elastic curves, shear and bending moment diagrams for beams, and column theory.

        Fall - Regular Academic Session - 2015 Download Syllabus Contact info & Office Hours
      • MAE 2312-001 Solid Mechanics

        This course covers the relationships between stresses and strains in elastic bodies and the tension, compression, shear, bending, torsion, and combined loadings which produce them. It also covers the deflections and elastic curves, shear and bending moment diagrams for beams, and column theory

      • MAE 2312-001 Solid Mechanics
        This course covers the relationships between stresses and strains in elastic bodies and the tension, compression, shear, bending, torsion, and combined loadings which produce them. It also covers the deflections and elastic curves, shear and bending moment diagrams for beams, and column theory.
        Spring - Regular Academic Session - 2011 Download Syllabus

Service to the Profession

  • Elected
    • May 2012 to  Present Member

      NASA Integrated Space Operation Summit for the implementation of the President’s Vision for Space Exploration Policy

    • May 2012 to  Present Member

      National Space Grant Executive Committee

    • May 2012 to  Present Member

      ASTM Technical Committee D-30 on High Modulus Fibers and their Composites

    • May 2012 to  Present Member

      AHS Structures and Materials Committee

    • May 2000 to  May 2008 Council Member

      AIAA Atlanta Section

    • May 2012 to  Present Member

      Promotion and Tenure External Evaluation Committee, Kuwait University, Kuwait

    • May 2012 to  Present Member

      Promotion and Tenure External Evaluation Member, Technion- Israel Institute of Technology

Service to the University

  • Appointed
    • May 2012 to  Present Chair

      PhD Ad Hoc Committee, per Provost’s request

    • Nov 2011 to  Dec 2012 Chair

      Information Security Policy Committee, per Dean’s request

    • Jan 2011 to  Jan 2012 Member

      COE Dean Search Committee

    • May 2012 to  Present Member

      COE Cross-departmental Collaboration Committee

    • Sept 2012 to  Present Member

      Chief Information Officer Search Committee

  • Volunteered
    • May 2012 to  Present Member

      ASTM D-30 Committee

    • May 2012 to  Present Member

      American Society for Composites Executive Committee

    • May 2012 to  Present Member

      Member, PhD Thesis Defense Examining Committee, Delft University of Technology, Delft, The Netherlands

Other Service Activities

  • Uncategorized
    • Dec  Reviewer for Articles, Books or Proposals:
      • AIAA Journal
      • Journal of the American Helicopter Society
      • ASTM STP Volumes, Composite Materials
      • Journal of Aerospace Engineering
      • Journal of Composite Materials
      • Journal of Composites Technology and Research
      • Journal of Aircraft
      • ASME Journal of Energy Resources Technology
      • Polymer News
      • ARO, Structures Program
      • NSF Engineering Division
      • University of West Virginia Energy Research Program
      • University of Missouri's Research Assistance Act Program
      • Springer-Verlag Publishing Company
      • McGraw-Hill Inc.
      • MacMillan Publishing Company
    • Dec  Editorship:
      • Past Editor-in-chief, Journal of Composites Technology and Research, ASTM.
      • Editorial Board Member, Trans Tech Publications Ltd., Key Engineering Materials series.
      • Editorial Review Committee Member, Journal of the National Technical Association.
    • Dec  Conference/Session Chairs:
      • Chairman, Session on Delamination, ASTM Second Symposium on Composite Materials: Fatigue and Fracture, Cincinnati, Ohio, April 27-28, 1987.
      • Chairman, Session on Structures and Materials, Fifth Annual Aerospace Technology Symposium, Atlanta, Georgia, February 19-20, 1988.
      • Chairman, Session on Interlaminar Fracture Toughness, ASTM Third Symposium on Composite Materials: Fatigue and Fracture, Orlando, Florida, November 6-7, 1989.
      • Chairman, Session on Considerations Within Composite Material Structures, Fifteenth Southeastern Conference on Theoretical and Applied Mechanics (SECTAM XV), Atlanta, Georgia, March 22-23, 1990.
      • Chairman, Session on Structures, AHS International Technical Specialists' Meeting on Rotorcraft Basic Research, Atlanta, Georgia, March 25-27, 1991.
      • Chairman, Session on Damage, Sixteenth Southeastern Conference on Theoretical and Applied Mechanics (SECTAM XVI), Nashville, Tennessee, April 12-14, 1992.
      • Chairman, Session on Micromechanics, Sixth Japan-US Conference on Composite Materials, Orlando, Florida, June 22-24, 1992.
      • Chairman, Session on Damage Prediction, Fifth Symposium on Composite Materials: Fatigue and Fracture, Atlanta, Georgia, May 4-6, 1993.
      • Chairman, Session on Composite Materials, Seventeenth Southeastern Conference on Theoretical and Applied Mechanics (SECTAM XVII), Hot Springs, Arkansas, April 10-12, 1994.
      • Chairman, Session on Materials Behavior and Durability, 26th International SAMPE Conference, Atlanta, Georgia, October 17-20, 1994.
      • Chairman, Session on Emerging Design Technologies, 36th  AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials (SDM) Conference, New Orleans, Louisiana, April 10-13, 1995.
      • Symposium Chairman, Sixth Symposium on Composite Materials: Fatigue and Fracture, Denver, Colorado, May 16-17, 1995.
      • Chairman, Session on Interlaminar Fracture Charaterization, Thirteenth Symposium on Composite Materials: Testing and Design, Orlando, Florida, May 19-21, 1996.
      • Co-Chairman, Session on Durability and Damage Tolerance of Composites, 1996, International mechanical Engineering Congress and Exposition, ASME, Atlanta, Georgia, November 17-22, 1996.
      • Invited Speaker, Morehouse College, Center of Excellence in Science, Engineering and Mathematics, Atlanta, Georgia, April 17, June 17, November 13, 1997.
      • Chairman, Session on Fatigue, ASC 13th Technical Conference, Baltimore, Maryland, September 21-23, 1998.
      • ASTM Wayne Stinchcomb Lecture, 17th Annual Technical Conference, American Society for Composites, West Lafayette, Indiana, October 21-23, 2002.
      • Symposium Chairman, ASC/ASTM-D30 Joint 19th Annual Technical Conference, Atlanta, Georgia, October 17-20, 2004.
      • Chairman, James H. Starnes Jr. Memorial Symposium, Atlanta, Georgia, March 15-16, 2006.
      • Chairman, session on Composite Analysis, ASC 21st Technical Conference, Dearborn, Michigan, September 17-20, 2006.
      • Chair, T. K. O'Brien Symposium, ASC 22nd Technical Conference, Seattle, Washington, September 17-19, 2007.
      • Chairman, session on Fatigue, Fracture and Residual Strength, ASC/SAMPE Joint  23rd Technical Conference, Memphis, Tennessee, September 9-11, 2008.
      • Conference Chair, National meeting of NASA Space Grant and Fellowship Program, Atlanta, Georgia, October 26-28, 2008.
    • Dec  Invited Speaker:
      • Invited Speaker on Advanced Materials and Composites, Spotlight on Research at Georgia Tech, Georgia Institute of Technology, Atlanta, Georgia, June 9-10, 1987.   
      • Invited Speaker, Center for Composite Materials and Structures Seminar Series, Virginia Tech, Blacksburg, Virginia, October 23, 1991.
      • Invited Speaker, member of the Army Research Office's US delegation, U. S.-Russian Workshop on Computer Synthesis of Structure and Properties of Advanced Composites, Institute of Applied Mechanics, Russian Academy of Sciences, Moscow, Russia, May 10-11, 1994.
      • Invited Speaker, Morehouse College, Center of Excellence in Science, Engineering and Mathematics, Atlanta, Georgia, April 17, June 17, November 13, 1997.
      • Invited Speaker, Center for Network Resources and Training, Morris Brown College, Atlanta, Georgia, September 24, 1998.
      • Invited Speaker, ASTM Wayne Stinchcomb Lecture, 17th Annual Technical Conference, American Society for Composites, West Lafayette, Indiana, October 21-23, 2002.
      • Invited Speaker, Institut de Technologie et Matériaux Avancés (ITAM), Conservatoire National des Arts et Métiers (CNAM), Paris, France, April 10, 2003.
      • Invited Speaker, Civil and Environmental Engineering Seminar Series, Vanderbilt University, Nashville, Tennessee, October 8, 2007.
      • Invited Speaker, Mechanical and Aerospace Graduate Seminar Series, Missouri University of Science and Technology, Rolla, Missouri, November 6, 2008.
      • Department of Mechanical Engineering Graduate Seminar, Texas A&M, October 28, 2009.
      • International Conference in Honor of V. Berdichevsky's 65th Birthday on Advances in Continuum Mechanics and Thermodynamics, Ruhr University Bochum, Germany, June 30-July 2, 2010.
      • Keynote Speaker, 2010 International Forum on Advanced Aerospace Composite Materials, Huazhong University of Science and Technology, October 15-16, 2010.
      • Department of Mechanical Engineering and Materials Science, Graduate Seminar, University of Pittsburgh, February 24, 2011.
      • Department of Aerospace Engineering, 30th Anniversary Seminar Series, Middle East Technical University, Ankara, Turkey, March 18, 2011.
      • Rotorcraft Composites Seminars, Turkish Aerospace Industries, Inc., Ankara, Turkey, March 14-18, 2011.
      • Department of Aerospace Engineering, Graduate Seminar, Texas A&M, April 14, 2011.
    • Dec  Campus Committee Activities:
      • Chair, Structural Mechanics and Materials Behavior Committee, School of Aerospace Engineering, Georgia Institute of Technology.
      • Chair, Structural Mechanics and Materials Behavior Faculty Search Committee, School of Aerospace Engineering, Georgia Institute of Technology..
      • Chair, Post Tenure Review Committee, School of Aerospace Engineering, Georgia Institute of Technology..
      • Member, Promotion Tenure and Reappointment, School of Aerospace Engineering, Georgia Institute of Technology.
      • Member, College of Engineering Promotion Tenure and Reappointment Committee, Georgia Institute of Technology.
      • Member, College of Engineering Mechanics Committee, Georgia Institute of Technology.
      • Member, Women's Promotion Tenure and Reappointment Advisory Panel, Georgia Institute of Technology.