Skip to content. Skip to main navigation.

avatar

Seyedali Abolmaali

Name

[Abolmaali, Seyedali]
  • Department Chair

Professional Preparation

    • 1999 Ph.D. in Structural and Computational MechanicsUniversity of Oklahoma
    • 1984 M.S. in Structural Engineering and MechanicsUniversity of Oklahoma
    • 1980 B.S. in Civil EngineeringUniversity of Oklahoma

Publications

      Conference Proceeding 2016
      • Lee, S., Park, Y. and Abolmaali, A., (2016) “CFRP Wrapping Joint System of Thin Wall Concrete Pipe with Reduced-Wall Thickness”, 7th International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS), Vancouver, Canada

        {Conference Proceeding} [Refereed/Juried]
      2016
      • Attiogbe, E., Abolmaali, A. and Park, Y., (2016) “Polypropylene Fiber-Reinforced Concrete Pipes under Sustained Loading”, 9th RILEM International Symposium on Fiber Reinforced Concrete (BEFIB), Vancouver, Canada

        {Conference Proceeding} [Refereed/Juried]

      Journal Article 2016
      • Rahmzadeh, A., Ghassemieh, M., Park, Y. and Abolmaali, A. (2016) “Effect of Stiffeners on Steel Plate Shear Wall Systems”, Steel and Composite Structures, An International Journal, 20(3), 545-569

        {Journal Article} [Refereed/Juried]
      2016
      • Hemmati, A., Kheyroddin, A., Sharbatdar, M., Park, Y. and Abolmaali, A. (2016) “Ductile Behavior of High Performance Fiber Reinforced Cementitious Composite (HPFRCC) Frames”, Construction and Building Materials, 115, 681-689

        {Journal Article} [Refereed/Juried]
      2016
      • Kinash, O., Abolmaali, A. and Park, Y. (2016) “Meridian Stresses in Thin Walled Steel Pipes by Cross sectional Ovalization”, ASCE J. of Pipeline Systems Eng. and Practice.

        {Journal Article} [Refereed/Juried]
      2016
      • Nagalia, G., Park, Y., Abolmaali, A. and Aswath, P. (2016), “Compressive Strength and Microstructural Properties of Fly Ash Based Geopolymer Concrete”, ASCE J. of Materials in Civil Engineering 

        {Journal Article} [Refereed/Juried]
      2016
      • Park, Y., Abolmaali, A., Kim, Y., and Ghahremannejad, M., (2016) “Compressive Strength of Fly Ash-based Geopolymer Concrete with Crumb Rubber Partially Replacing Sand”, Construction and Building Materials

        {Journal Article} [Refereed/Juried]

      Conference Proceeding 2015
      • Park, Y., Ramirez, G., Abolmaali, A. and Kim, Y. (2015), “Acoustic Emission Performances of Stressed-GFRP Bars Embedded in Concrete under Accelerated Aging Conditions”, Architectural Engineering Institute (AEI) conference. pp. 248-258

        {Conference Proceeding} [Refereed/Juried]
      2015
      • Park, Y., Abolmaali, A., Bai, J. and Kim, Y., (2015) “Sensitivity analysis of Flexural Characteristics for Steel and Synthetic Fiber Reinforced Concrete”, 5th International Conference on Construction Materials (ConMat’15), Whistler, Canada.

        {Conference Proceeding} [Refereed/Juried]
      2015
      • Park, Y., Abolmaali, A., Aswath, P. and Lee, S., (2015) “The Effect on Compressive Strength of Fly Ash Based Geopolymer Concrete with Crumb Rubber Replacing Fine Aggregates”, 2015 World Congress on Advances in Structural Engineering and Mechanics (ASEM15), Incheon, Korea

        {Conference Proceeding} [Refereed/Juried]
      2015
      • Park, Y., Abolmaali, A. and Beakley, J.,(2015)  “Three Edge-Bearing Performance of RCP and SYN-FRCP Repaired with Externally Bonded CFRP”, 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015), Nanjing, China.

        {Conference Proceeding} [Refereed/Juried]

      Journal Article 2015
      • Siringi, G., Abolmaali, A., and Aswath, P. (2015) “Properties of Concrete with Tire Derived Aggregate (TBA) Partially Replacing Coarse Aggregates”, The Scientific World Journal-open access

        {Journal Article} [Refereed/Juried]
      2015
      • Park, Y., Abolmaali, A., Mohammadagha, M. and Lee, S. (2015) “Structural performance of dry-cast rubberized concrete pipes with steel and synthetic fibers”, Construction and Building Materials, 77, 218-226.

        {Journal Article} [Refereed/Juried]
      2015
      • Treadway, J., Abolmaali, A., Lu, F., and Aswath, P.  (2015) “Tensile and Fatigue Behavior of Superelastic Shape Memory Rods”, J. of Materials & Design, 86, 105-113

        {Journal Article} [Refereed/Juried]
      2015
      • Park, Y., Abolmaali, A., Beakley, J. and Attiogbe, E., (2015) “Thin-Walled Flexible Concrete Pipes with Synthetic Fibers and Reduced Traditional Steel Cage”, Engineering Structures, 100, 731-741. 

        {Journal Article} [Refereed/Juried]

      Conference Proceeding 2014
      • Park, Y., Abolmaali, A., Attiogbe, E., Lee, S. (2014), “Time-Dependent Behavior of Synthetic Fiber Reinforced Concrete Pipes under Long-Term Sustained Loading”, Proceeding of 93th Annual Meeting of Transportation Research Board, Washington D.C.

        {Conference Proceeding} [Refereed/Juried]

      Journal Article 2014
      • Dezfooli, M., Abolmaali, A., and Razavi. M., (2014). “Coupled Nonlinear Finite Element Analysis of Soil-Steel Pipe Structure Interaction,” ASCE International Journal of Geomechanics,10.1061/(ASCE)GM.1943-5622.0000387, 04014032

        {Journal Article} [Refereed/Juried]
      2014
      • Razavi, M., and Abolmaali, A. (2014). “Earthquake resistance frames with combination of rigid and semi-rigid connections”, Journal of Constructional Steel Research, 98, 1-11.

        {Journal Article} [Refereed/Juried]
      2014
      • Dezfooli, M., Abolmaali, A., Park, Y., Razavi, M., Bellaver, F. (2014), “Staged Construction Modeling of Steel Pipes Buried in Controlled Low Strength Material (CLSM) Using 3-D Nonlinear Finite Element Analysis”, ASCE International Journal of Geomechanics, Int. J. Geomech., 10.1061/(ASCE)GM.1943-5622.0000436, 04014088

        {Journal Article} [Refereed/Juried]
      2014
      • Park, Y., Abolmaali, A., Attiogbe, E. , Lee, S. (2014), “Time-Dependent Behavior of Synthetic Fiber Reinforced Concrete Pipes Under Long-Term Sustained Loading”, Journal of Transportation Research Board, v2407, 71-79

        {Journal Article} [Refereed/Juried]
      2014
      • Mikhaylova, A. and Abolmaali, A., (2014), “Structural Behavior of Novel Steel-Fiber Materials in Concrete Pipes (ASTM C1765)”, Advances in Civil Engineering Materials (ACEM), ASTM, 10.1520/ACEM20130125

        {Journal Article} [Refereed/Juried]
      2014
      • Park, Y., Abolmaali, A., Mohammadagha, M. and Lee, S. (2014), “Flexural Characteristics of Rubberized Hybrid concrete Reinforced with Steel and Synthetic Fibers”, Advances in Civil Engineering Materials (ACEM), ASTM, 3(1), 495-508

        {Journal Article} [Refereed/Juried]

      Conference Paper 2013
      • Wilson, A., and Abolmaali, A. (2013), “Comparison of Material Behavior of Steel and Synthetic Fibers in Dry Cast Application,” In Transportation Research Board 92nd Annual Meeting (No. 13-3925).

        {Conference Paper} [Refereed/Juried]

      Conference Proceeding 2013
      • Dezfooli, M., Abolmaali, A., Razavi M., “Staged Construction Modeling of a Large Diameter Steel Pipe Using 3-D Nonlinear Finite Element Analysis,” Transportation Research Board Conference, Washington D.C., January 2013.

        {Conference Proceeding} [Refereed/Juried]

      Journal Article 2013
      • Wilson, A., and Abolmaali, A., (2013), “Comparison of Material Behavior of Steel and Synthetic Fibers in Dry Cast Application,” Transportation Research Record: Journal of the Transportation Research Board, in press.

        {Journal Article} [Refereed/Juried]
      2013
      • Siringi, G., Abolmaali, A., and Aswath, P., (2013), “Properties of Concrete with Crumb Rubber Replacing Fine Aggregates (Sand),” Advances in Civil Engineering Materials Journal, in press.  

        {Journal Article} [Refereed/Juried]

      Journal Article 2012
      • Abolmaali, A., Razavi, M., and Radulova, D. ,(2012), “On the Concept of Earthquake Resistant Hybrid Steel Frames,” The Journal of Constructional Steel Research, Vol. 68, pp. 34-42
        {Journal Article} [Non-refereed/non-juried]
      2012
      • Abolmaali, A., Mikhaylova, A., Wilson, A., & Lundy, J., (2012), “Performance of Steel Fiber-Reinforced Concrete Pipes,” Transportation Research Record: Journal of the Transportation Research Board, 2313(1), 168-177.  
        {Journal Article} [Non-refereed/non-juried]
      2012
      • Razavi, M., Kiamanesh, R., Abolmaali, A., (2012), “Computational benchmarks in simulation of cyclic performance of steel connections using three-dimensional nonlinear finite element method,” Journal on Structural Engineering, Vol. 1, No. 3, September - November 2012, pp 15-25.
        {Journal Article} [Non-refereed/non-juried]
      2012
      • Kiamanesh, R., Abolmaali, A, Razavi, M., (2012), “The Effect of the Circular Bolt Pattern on the Behavior of the Extended End-Plate Connection,” ASCE Journal of Structural Engineering, in press.  

        {Journal Article} [Non-refereed/non-juried]

      Conference Proceeding 2011
      • Abolmaali, A., Mikhaylova A., Wilson, A., and Lundy, J. (2011). “Performance of steel fiber reinforced concrete pipes,” proceedings of the 91st Transportation Research Board Meeting, Washington D.C., January 22-26, 2012.

        {Conference Proceeding} [Refereed/Juried]

      Journal Article 2011
      • Abolmaali, A., and Kararam, A. (2011). “Nonlinear finite element modeling analysis of soil-pipe interaction,” ASCE International Journal of Geomechanics.
        {Journal Article} [Non-refereed/non-juried]
      2011
      • Jalali, Banazadeh, Tafakori, and Abolmaali (2011). “Seismic performance assessment of steel moment frames with generic Locally Reinforced connections,” the Journal of Constructional Steel Research, Volume 67, No. 8, pp. 1261-1271.
        {Journal Article} [Non-refereed/non-juried]
      2011
      • Motahari, A., andAbolmaali, A. (2011). “Effect of bedding thickness on behavior of rigid pipes as determined by using numerical crack modeling,” the Journal of Transportation Research Board, No. 2172, pp. 182-191.
        {Journal Article} [Non-refereed/non-juried]
      2011
      • Kari, A., Ghassemieh, M., and Abolmaali, A. (2011). “A new dual bracing system for improving the seismic behavior of steel structures,” the Journal of Smart Materials and Structures, Vol. 20, No. 125020, 14 pages.
        {Journal Article} [Non-refereed/non-juried]
      2011
      • Jalali, A., Banazadeh, M., Abolmaali, A., and Tafakori, E. (2011). “Probabilistic seismic demand assessment of steel moment frames with side-plate connections,” the Journal of Scientia Iranica, Elsevier, Vol. 10, No. 1016, 14 pages.  
        {Journal Article} [Non-refereed/non-juried]

      Conference Paper 2010
      • Abolmaali, A. and Kararam, A., (2010). “Experimental and Finite Element Simulation of D-Load Test and Significance of Crack Width for Concrete Pipes," ”proceedings of the 89th Transportation Research Board Meeting, Washington D.C.

        {Conference Paper} [Non-refereed/non-juried]

      Conference Proceeding 2010
      • Abolmaali, A. and Motahari, A., (2010). “Effect of Bedding Thickness on the Behavior of Rigid Pipes By Using Numerical Crack Modeling," proceedings of the 89th Transportation Research Board Meeting, Washington D.C., in press.

        {Conference Proceeding} [Refereed/Juried]

      Journal Article 2010
      • Kiamanesh, R.; Abolmaali, A.; Ghammemieh, M. The Effect of Stiffeners on the Strain Patterns of the Welded Connection Zone. Journal of Constructional Steel Research 2010, 66(1), 19-27.
        {Journal Article} [Refereed/Juried]
      2010
      • Kararam, A. and Abolmaali, A., (2010). “Nonlinear Finite Element Analysis on Reinforced Concrete Circular Structures,” ACI Structural and Materials Journals, Manuscript ID: S-2010-104, Under Reviewed.  
        {Journal Article} [Refereed/Juried]
      2010
      • Abolmaali, A.; Motahari, A. “Structural Performance of Thermoplastic Hydraulic Structure,” the ASCE Journal of Transportation Engineering/Pipeline, Volume 136, No. 4, pp. 298-303.
        {Journal Article} [Refereed/Juried]

      Journal Article 2009
      • Abolmaali, A.; Kararam, A. Nonlinear Finite Element-Based Investigation of Effect of Bedding Thickness on Underground Pipe,. ASCE Journal of the Transportation Engineering, (ASCE) 2009 (TE.1943-54).
        {Journal Article} [Refereed/Juried]
      2009
      • Abolmaali, A., Kukrei, A., Motahari, A., & Ghassemieh, M. (2009). Energy dissipation characteristics of semi-rigid connection,. the Journal of Constructional Steel Research, 65, 19-27.
        {Journal Article} [Refereed/Juried]

      Conference Paper 2008
      • Abolmaali, A. and Radulva, D., (2008). “Computational methods in dynamic analysis of frames,” proceedings of the 8th World Congress on Computational Mechanics, IACM-ECCOMAS”, Venice, Italy, on CD Rom.

        {Conference Paper} [Refereed/Juried]

      Journal Article 2008
      • Ghobadi, M.; Ghassemieh, M.; Mazroi, A.; Abolmaali, A. Seismic performance of ductile welded connections using T-stiffeners. The Journal of Constructional Steel Research 2008.
        {Journal Article} [Refereed/Juried]
      2008
      • Razavi, H.; Abolmaali, A.; Ghassemieh, M. A weighted residual parabolic acceleration time integration method for problems in structural dynamics. The Journal of Computational Methods in Applied Mathematics 2008, 7 (2), 227-238.
        {Journal Article} [Refereed/Juried]
      2008
      • Abolmaali, A. Investigation of shear behavior in reinforced concrete boxes. the ACPA Journal/Magazine 2008, 60 (1), 9-12.
        {Journal Article} [Refereed/Juried]
      2008
      • Abolmaali, A.; Garg, A. Shear behavior and mode of failure for ASTM C1433 precast box culverts. the ASCE Journal of Bridge Engineering 2008, Vol. 13 (No. 4), 331-338.
        {Journal Article} [Refereed/Juried]
      2008
      • Garg, A.; Abolmaali, A. Nonlinear finite element modeling of precast concrete box culverts. The ASCE Journal of Transportation Engineering 2008.
        {Journal Article} [Refereed/Juried]
      2008
      • Fernandez, R.; Abolmaali, A.; Le, T. Analysis and development of a passive mechanical vibration abatement device for traffic monitoring cameras. the ASCE Journal of Transportation Engineering 2008.
        {Journal Article} [Refereed/Juried]
      2008
      • Le, T., Abolmaali, A., Motahari, S. A., Yeih, W., & Fernandez, R. (2008). Finite Element-based analyses of natural frequencies of long tapered hollow steel poles. The Journal of Constructional Steel Research, 64(3), 275-284.
        {Journal Article} [Refereed/Juried]
      2008
      • Schachar, R. A.; Liao, R. D.; Kirby, R. D.; Kamangar, F.; Savoie, J. H.; Abolmaali, A.; Rosensteel, G. Unexpected shape changes of encapsulated oblate spheroids in response to equatorial traction. the Journal of theoretical and mathematical physics 2008.
        {Journal Article} [Refereed/Juried]

      Conference Proceeding 2007
      • Abolmaali, A. and Kararam, A. (2007). “Non Finite Element-Based Investigation of the Effect of Bedding Thickness on Underground Pipe,” Proceedings of the 86th Annual Meeting of the Transportation Research Board, on CD Rom.

        {Conference Proceeding} [Refereed/Juried]
      2007
      • Abolmaali, A. and Garg, A. (2007). “Failure Mode for Precast Concrete Box Culverts Subjected to Wheel Live Load,” Proceedings of the 86th Annual Meeting of the Transportation Research Board, on CD Rom.

        {Conference Proceeding} [Refereed/Juried]
      2007
      • Abolmaali, A. and Najafi, M. (2007). “Non-linear Finite Element Modeling and Analysis of Pipe-Soil Interaction,” Proceedings of the 86th Annual Meeting of the Transportation Research Board, on CD Rom.

        {Conference Proceeding} [Refereed/Juried]

      Journal Article 2007
      • Choi, Y.; Abolmaali, A.; Jung, J.; Jong, S. Development of experimental test set up to evaluate abrasion characteristics of drainage pipes. The ASCE Journal of Irrigation and Drainage Engineering 2007, 133 (3), 206-210.
        {Journal Article} [Refereed/Juried]
      2007
      • Abolmaali, A.; Garg, A. K. Effect of wheel live load on shear behavior of precast reinforced concrete box culverts. The ASCE Journal of Structural Engineering 2007, 13 (1), 93-99.
        {Journal Article} [Refereed/Juried]
      2007
      • Ghassemieh, M. & Abolmaali, A. (2007). Implementation of shape memory alloy dampers for passive control of structures subjected to seismic excitations. The Journal of Constructional Steel Research, 29(7), 945-968.
        {Journal Article} [Refereed/Juried]
      2007
      • Schachar, R.; Pierscionek, B.; Abolmaali, A.; Le, T. The relationship between accommodative amplitude and the ratio of central lens thickness to its equatorial diameter in vertebrate eyes. the British Journal of Ophthalmology 2007, 91 (6), 812-817.
        {Journal Article} [Refereed/Juried]
      2007
      • Abolmaali, A.; Schachar, R.; Le, T. Sensitivity study of human crystalline lens accommodation. The Journal of Computer Methods and Programs in Biomedicine 2007, 85 (1), 77-90.
        {Journal Article} [Refereed/Juried]

      Conference Proceeding 2006
      • Garg, Anil K. and Abolmaali, A.  (2006). "Shear Behavior of Small Span Single and Double Pre-cast Reinforced Concrete Box Culverts," Proceedings of the ASCE Pipeline Division Specialty Conference, “Pipelines 2006 Service to the Owner”, Chicago, Illinois, on CD Rom.

        {Conference Proceeding} [Refereed/Juried]

      Journal Article 2006
      • Garg, A. K.; Abolmaali, A.; Fernandez, R. Experimental investigation of shear capacity of pre-cast reinforced concrete box culverts. The ASCE Journal of Bridge Engineering 2006, 12 (4), 511-517.
        {Journal Article} [Refereed/Juried]
      2006
      • Jung, J.; Abolmaali, A.; Choi, Y. Finite element analysis of tapered steel and fiber reinforced plastic bridge camera poles. The ASCE Journal of Bridge Engineering 2006, 11 (5), 611-617.
        {Journal Article} [Refereed/Juried]
      2006
      • Razavi, H.; Abolmaali, A.; Ghassemieh, M. Invisible elastic bolt model concept for finite element analysis of bolted connections. The Journal of Constructional Steel Research 2006, 63 (5), 647-657.
        {Journal Article} [Refereed/Juried]
      2006
      • Schachar, R.; Abolmaali, A.; Le, T. Insight into the etiology of the age-related decline amplitude of accommodation of human lens using a nonlinear finite element model of the accommodating human lens. The British Journal of Ophthalmology 2006, 90, 1304-1309.
        {Journal Article} [Refereed/Juried]
      2006
      • Schachar, R.; Abolmaali, A.; Kamangar, F. Three-dimensional ultrasound, biomicroscopy environmental and conventional scanning electron microscopy investigations of the human zonula ciliaris for numerical modeling of accommodation. Graefe's Archive for Clinical and Experimental Ophthalmology 2006, 244 (8), 1062-1063.
        {Journal Article} [Refereed/Juried]

      Conference Paper 2005
      • Jung, J., and Abolmaali, A. (2005). “Finite Element Analysis of Tapered Fiber Reinforced Hollow Poles,” Proceedings of the 10th International Conference on Civil, Structural, and Environmental Engineering, Rome, Italy, on CD Rom.

        {Conference Paper} [Refereed/Juried]

      Conference Proceeding 2005
      • Ghassemieh, M., Iranmanesh, A., and Abolmaali, A. (2005). “Finite Element Analysis of Framed Structures Using Shape Memory Alloy Braces Subjected To Cyclic Loadings,” The 2006 Annual Stability Conference, San Antonio, Texas.

        {Exhibition Catalog} [Refereed/Juried]

      Journal Article 2005
      • J. Jung, A. Abolmaali, and Y. Choi. "Finite Element Analysis of Tapered Steel and Fiber Reinforced Plastic Bridge Camera Poles," ASCE Journal of Bridge Engineering, 2005.
        {Journal Article} [Refereed/Juried]
      2005
      • A. Abolmaali, J. Treadway, P. Aswath, F. Lu, and E. McCarthy. "Hysteresis Behavior of T-Stub Connections with Super-elastic Shape Memory Fasteners," Journal of Constructional Steel Research, 2005.
        {Journal Article} [Refereed/Juried]
      2005
      • A. Abolmaali, J. H. Matthys, M. Farooqi, and Y. Choi. "Development of Moment-Rotation Model Equations for Flush End-Plate Connections," Journal of Constructional Steel Research, vol. 61, pp. 1595-1612, 2005.
        {Journal Article} [Refereed/Juried]
      2005
      • Sukhvarsh, J., Abolmaali, A., and Kettleson, P. (2005). "Influence of Aggregate Gradation on the Performance of Concrete Used in Highway Pavements," Journal of Transportation Research Board, under review.

        {Journal Article} [Refereed/Juried]

      Conference Paper 2004
      • A. Abolmaali, H. Razavi, and Z. Godsell. "Stability Analysis of Steel Frames With Partially Constrained Connections," presented at 2004 Annual Stability Conference, Long Beach, CA, 2004.
        {Conference Paper} [Non-refereed/non-juried]
      2004
      • Abolmaali, A., Razavi, H., and Godsell, Z. (2004). “Stability Analysis of Steel Frames With Partially Constrained Connections,” The 2004 Annual Stability Conference, Long Beach, CA, 2004, pp. 519-538.

        {Conference Paper} [Non-refereed/non-juried]

      Conference Paper 2003
      • Abolmaali, A., and Naveen, N. (2003). “Web-enabled interactive modules to display finite element models in structural engineering courses,” Proceedings of the American Society of Engineering Education (ASEE) Golf Southwest Conference, Annual Conference Held at the University of Texas at Arlington, March 19-21, on CD Rom.

        {Conference Paper} [Non-refereed/non-juried]
      2003
      • Razavi, H., and Abolmaali, A. (2003). “A Dual Degree of Freedom Method for Problems in Contact Mechanics, Accepted for Publication in the Sixth International Conference on Computational Methods and Experimental Measurements in Contact Mechanics,” Greece.

        {Conference Paper} [Non-refereed/non-juried]

      Journal Article 2003
      • A. Abolmaali, A. R. Kukreti, and S. H. Razavi. "Hysteresis Behavior of Semi-Rigid Double Web Angle Steel Connections," Journal of Constructional Steel Research, vol. 59, pp. 1057-1082, 2003.
        {Journal Article} [Refereed/Juried]

      Conference Paper 2002
      • Abolmaali, A., and Razavi, S. H. (2002). “Web-Based Finite-Element Mesh Generator for Testing Behavior of Steel Building Connections in Virtual Environment,” 22nd Computers and Information in Engineering Conference, Montreal, Canada.

        {Conference Paper} [Refereed/Juried]
      2002
      • Abolmaali, A., and Razavi, S. H. (2002). “Coupled Nonlinear Analysis of Frames with Double Web Angle Connections,” The Fourth International Conference on Computational Stochastic Mechanics” Sicily, Italy.

        {Conference Paper} [Refereed/Juried]
      2002
      • Razavi, S.H. and Abolmaali, A. (2002). “An Efficient Reformulation of Duhamel’s Integral to Reduce Execution Time,” 4th US National Congress of Theoretical and Applied Mechanics, Blacksburg, VA.

        {Conference Paper} [Refereed/Juried]

      Conference Paper 2000
      • Kukreti, A.R., and Abolmaali, A. (2000). “Dynamic Analysis of Steel Frames with Semi-Rigid Connections,” Proceedings of the XX Southeastern Conference on Developments in Theoretical Mechanics, College of Engineering, Auburn University, Auburn, Alabama, April 16-18, 16 pages.

        {Conference Paper} [Refereed/Juried]

      Journal Article 1999
      • A. R. Kukreti and A. Abolmaali. "Moment-Rotation Hysteresis Behavior of Top and Seat Angle Steel Frame Connections," ASCE Journal of Structural Engineering, vol. 125, no. 8, pp. 810-820, 1999.
        {Journal Article} [Refereed/Juried]

      Conference Paper 1998
      • Kukreti, A.R., and Abolmaali, A. (1998). “Moment-Rotation Hysteresis Models for Top and Seat Angle Semi-Rigid Connections,” Proceedings of the XIX Southeastern Conference on Developments in Theoretical Mechanics, Vol. XIX, College of Engineering, Florida Atlantic University, Boca Raton, Florida, May 3-5, pp. 235-245.

        {Conference Paper} [Refereed/Juried]

      Conference Proceeding 1998
      • Kukreti, A.R., and Abolmaali, A., (1998). “Moment-Rotation Hysteresis Behavior of Semi-Rigid Steel Building Joints,” Proceedings of the International Symposium on Impact and Friction of Solids, Structures, and Intelligent Machines, Ottawa, Canada, June 27-30, pp. 39-42

        {Conference Proceeding} [Refereed/Juried]

      Journal Article 1987
      • A. R. Kukreti, T. M. Murray, and A. Abolmaali. "End-Plate Connection Moment-Rotation Relationship," Journal of Constructional Steel Research, vol. 8, pp. 137-157, 1987.
        {Journal Article} [Refereed/Juried]

Presentations

  • Past
    •  
      Time-Dependent Behavior of Synthetic Fiber Reinforced Concrete Pipes Under Long-Term Sustained Loading

      Longterm performance of SYN-FRC pipe 

  • Past
    •  
      An update of Fiber Reinforced Thin Walled Concrete Pipe

      SYN-FRC update

  • Past
    •  
      Innovation of Semi-Rigid Concrete Pipes with Macro Synthetic Fibers

      Development of Semi-Rigid SYN-FRCP

  • Past
    •  
      Innovation of Concrete Pipe using Synthetic Fibers and CFRP

      Development of joint performance on SYN-FRCP

  • Past
    •  
      Short and Long-term Performances of Synthetic Fiber-Reinforced Concrete Pipe based on ASTM C1818

      Development of ASTM C1818

Courses

      • CE 4325-001 Ce 4325-001

        Stiffness method using basic equations and virtual work; element equations using shape functions for axial, beam, frame, two dimensional elements; stiffness method for three dimensional structures. Flexibility method; finite element modeling and optimization of idealized structures. Credit not granted for both CE 4325 and CE 5303. Prerequisite: Grade of C or better in CE 3341. 

        Fall - Regular Academic Session - 2013 Download Syllabus Contact info & Office Hours
      • CE 5303-001 Ce 5303-001

        Stiffness method using basic equations and virtual work; element equations using shape functions for axial, beam, frame, two dimensional elements; stiffness method for three dimensional structures. Flexibility method; finite element modeling and optimization of idealized structures. Credit not granted for both CE 4325 and CE 5303. Prerequisite: Grade of C or better in CE 3341. 

        Fall - Regular Academic Session - 2013 Download Syllabus Contact info & Office Hours
      • CE 5303-002 Ce 5303-002

        Stiffness method using basic equations and virtual work; element equations using shape functions for axial, beam, frame, two dimensional elements; stiffness method for three dimensional structures. Flexibility method; finite element modeling and optimization of idealized structures. Credit not granted for both CE 4325 and CE 5303. Prerequisite: Grade of C or better in CE 3341. 

        Fall - Regular Academic Session - 2013 Download Syllabus Contact info & Office Hours
      • CE 4325-001 FUNDAMENTALS OF FINITE ELEMENT METHOD
        Stiffness method using basic equations and virtual work; element equations using shape functions for axial, beam, frame, two dimensional elements; stiffness methods for three dimensional structures. Flexibility method; finite elements modeling and optimization of idealized structures. Prerequisite: Grade of C or better in CE 3341.
        Fall - Regular Academic Session - 2012 Download Syllabus
      • CE 5303-001 INTRODUCTION TO FINITE ELEMENT
        Stiffness method using basic equations and virtual work; element equations using shape functions for axial, beam, frame, two dimensional elements; stiffness method for three dimensional structures. Flexibility method; finite element modeling and optimization of idealized structures. Credit not granted for both CE 4325 and CE 5303. Prerequisite: Grade of C or better in CE 3341.
        Fall - Regular Academic Session - 2012 Download Syllabus
      • CE 6352-001 Advanced Finite Element Method
        Advance topics in nonlinear finite element analysis based on displacement and mixed formulations. This includes topics such as large displacement small strain, large displacement large strain, inelastic material property, and contact nonlinearities. 
        Spring - Regular Academic Session - 2012
      • CE 4324-001 MECHANICS OF MATERIALS II
        Theories of stress and deformation, stress-strain tensors, stress and strain relationships, stresses due to various loading conditions, theories of failure, energy methods, shear-center, unsymmetrical bending, curved beams, torsion in closed and open cell cross-sections and buckling analysis. Prerequisite: Grade of C or better in CE 2313.
        Fall - Regular Academic Session - 2011 Download Syllabus
      • CE 5303-001 INTRODUCTION TO FINITE ELEMENT
        Stiffness method using basic equations and virtual work; element equations using shape functions for axial, beam, frame, two dimensional elements; stiffness method for three dimensional structures. Flexibility method; finite element modeling and optimization of idealized structures. Credit not granted for both CE 4325 and CE 5303. Prerequisite: Grade of C or better in CE 3341.
        Fall - Regular Academic Session - 2011 Download Syllabus
      • CE 4325-001 FUNDAMENTALS OF FINITE ELEMENT METHOD
        Stiffness method using basic equations and virtual work; element equations using shape functions for axial, beam, frame, two dimensional elements; stiffness methods for three dimensional structures. Flexibility method; finite elements modeling and optimization of idealized structures. Prerequisite: Grade of C or better in CE 3341.
        Fall - Regular Academic Session - 2011 Download Syllabus
      • CE 5315-001 ADVANCED MECHANICS OF MATERIALS
        Analysis of stresses and strains at a point, stress-strain relationships, stresses due to various leading conditions, theories of failure, energy methods, shear center, unsymmetrical bending, curved beams, torsion in closed and open cell cross-sections, principles of plastic analysis, and buckling analysis. Credit not granted for both CE 4324 and CE 5315. Prerequisite: CE 2313.
        Fall - Regular Academic Session - 2011 Download Syllabus
      • CE 6357-001 STRUCTURAL STABILITY
        Buckling of columns; approximate method of analysis for buckling problems; beam columns; structural system stability (buckling of frames); lateral torsional buckling; buckling of plates; and buckling of axially compressed cylindrical shells. Prerequisite: CE 5303 or concurrent registration therein.
        Spring - Regular Academic Session - 2011 Download Syllabus
      • CE 4325-001 FUNDAMENTALS OF FINITE ELEMENT METHOD
        An introductory course in the finite element method for analysis of one-two-and three dimensional structural systems.
        Fall - Regular Academic Session - 2010 Download Syllabus
      • CE 5303-001 INTRODUCTION TO FINITE ELEMENT

        An introductory course in the finite element method for analysis of one-two-and three dimensional structural systems.

        Fall - Regular Academic Session - 2010 Download Syllabus
      • CE 2313-001 Mechanics of materials
        Relationship between stresses and strains in elastic bodies and tension, compression, shear, bending, torsion, and combined loadings which produce them. Deflections and elastic curves, shear and bending moment diagrams for beams, and column theory.
        Fall - Regular Academic Session - 2010 Download Syllabus
      • CE 4368-001 Advanced Theory of Structures
        Classical analysis of indeterminate beam, frames, and trusses. Analysis of single suspension systems; cable stayed structures; and nonlinearity of cable suspension systems. Analysis of structures for temperature loading; plastic analysis of structures; yield line analysis; and large deformation analysis. Analysis of arches and suspension systems: two hinged arches and fixed arches.
        Spring - Regular Academic Session - 2010 Download Syllabus
      • CE 2313-001 Mechanics of materials
        Relationship between stresses and strains in elastic bodies and tension, compression, shear, bending, torsion, and combined loadings which produce them. Deflections and elastic curves, shear and bending moment diagrams for beams, and column theory.
        Spring - Regular Academic Session - 2010 Download Syllabus
      • CE 5351-001 Advanced Theory of Structures
        Classical analysis of indeterminate beam, frames, and trusses. Analysis of single suspension systems; cable stayed structures; and nonlinearity of cable suspension systems. Analysis of structures for temperature loading; plastic analysis of structures; yield line analysis; and large deformation analysis. Analysis of arches and suspension systems: two hinged arches and fixed arches.
        Spring - Regular Academic Session - 2010 Download Syllabus
      • CE 4325-001 FUNDAMENTALS OF FINITE ELEMENT METHOD
        An introductory course in the finite element method for analysis of one-two-and three dimensional structural systems.
        Fall - Regular Academic Session - 2009 Download Syllabus
      • CE 5303-001 INTRODUCTION TO FINITE ELEMENT

        An introductory course in the finite element method for analysis of one-two-and three dimensional structural systems.

        Fall - Regular Academic Session - 2009 Download Syllabus